Hydraulic Nick Baler Waste paper Baling Machine introduces equipment maintenance methods. Hydraulic Nick Baler Waste paper Baling Machine is easy to operate and is accepted by more and more companies. However, as the packer is continuously used every day, even the best products have a period of use.
In addition to the quality of Nick Baler Waste Paper Baling Machine itself, how to increase the life of Nick Baler Waste Paper Baling Machine and reduce the failure rate as much as possible, so that it can play a high utilization value has become a concern of many enterprises.
The following is the maintenance and maintenance of hydraulic Nick Baler Waste paper Baling Machine.
  How much do you know about the advantages of Nick Baler Waste paper Baling Machine equipment? According to the prospect of progress in the times, technological products are also constantly developing. If you have used it, you must know how many advantages of Nick Baler Waste paper Baling Machine. If you have never used it, then you can just consider it. I started to like Nick Baler Waste paper Baling Machine.
   1. It is recommended to install an oil-water separator, the air source is dry: the general air source is relatively humid, the hydraulic Nick Baler Waste paper Baling Machine will cause unstable performance due to the entry of moisture, and will cause damage in the long run. Before use, the oil storage of the oil-water separator oil storage tank should be at least 2/3, and the water in the water storage tank should be drained regularly.
   2. The choice of Nick Baler Waste paper Baling Machine is also very important, the inner diameter is generally 8-10mm; the length of the trachea is generally not more than 15-20m. Fully automatic Nick Baler Waste paper Baling Machine is an electromechanical integration product, mainly composed of mechanical system, control system, feeding system and power system. The whole packaging process is composed of auxiliary time such as pressing, returning, lifting, transferring, ascending, ascending, and receiving. If the trachea is too long, consider adding a booster device in the middle, which will affect the performance of the baler equipment.
   3. Before each operation of the baler, please take a few minutes to check whether the air source is working properly and the hydraulic pressure is stable. The air pressure of the baler is preferably 0.7MPa.
   4. When using, adjust whether the baler's pulling force can be determined by the sound when the baler is working. Nick Baler Waste paper Baling Machine With the increasing awareness of environmental protection, Nick Baler Waste paper Baling Machine has played a big role. It can reuse some waste paper and is more and more accepted by everyone. Domestic Nick Baler Waste paper Baling Machine has been constantly innovating and following the development of some advanced technologies abroad. The louder the sound, the stronger the pull, and vice versa.
   5. To develop the good habit of diligently adding lubricating oil, according to the frequency of use of the baler, regularly add appropriate amount of lubricating oil to the air inlet of the baler to reduce wear.
   6. After working for a long time, you should use a wire brush to clean the broken plastic belt on the tightening wheel and the anti-slip plate.
   7. After the work is completed or during non-working hours, the air source is turned off. Misoperation control will cause the baler to run without belt, resulting in wear of wearing parts.
   8. When Nick Baler Waste paper Baling Machine fails, please ask after-sales personnel or experienced personnel to disassemble and repair it.
Nick Baler Waste paper Baling Machine is simple to operate. Because there is no need for manual operation in the entire operation process, that is, the entire workflow can be completed by the operation of buttons. So there will be no accidents due to some temporary machine failure during operation. You can decide the size of Nick Baler Waste paper Baling Machine yourself.as more information ,please visit :www.nkbaler.net

2020-04-08

Guide: The disassembled parts of the Nick Baler Waste paper Baling Machine equipment should be placed in a wooden frame, wooden box or tray in order. The pieces are scattered, damaged or rusted due to moisture. In order to avoid confusion during assembly. Nick Baler Waste paper Baling Machine disassembly should be prepared for the assembly of the baler. Check the mark and make the mark. Timing gears, crankshafts and flywheels, connecting rods and connecting rod caps, complete sets of processing or optional coupling parts, and other non-interchangeable parts should be marked according to the original position or sequence before disassembly to avoid confusion during assembly . To sort and store parts, store them according to the size of the parts and the assembly to avoid confusion.

   The failures that are likely to occur in the work of the automatic Nick Baler Waste paper Baling Machine are to further inspect the damage of the Nick Baler Waste paper Baling Machine parts and take out the damaged parts for repair or replacement. There are 4 sets of wire feeding device for scrap metal baler, each set corresponds to a baling head, each set includes baling line conveying device and baling line anti-tensioning device. The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The wheels of the compression frame are guided to run along the outer sides of the two tracks, and the hydraulic cylinders that drive the operation of the compression frame are arranged therein. In addition, there are a whole set of hydraulic stations besides mechanical components. As can be seen from the above description, various movements of the waste paper hydraulic baler are completed by the power of the fluid. Fully automatic Nick Baler Waste paper Baling Machine is an electromechanical integration product, mainly composed of mechanical system, control system, feeding system and power system. The whole packaging process is composed of auxiliary time such as pressing, returning, lifting, transferring, ascending, ascending, and receiving. This is the efficiency and service life of Nick Baler Waste paper Baling Machine. For our good production profit!
        Strictly abide by the correct disassembly and assembly method of Nick Baler Waste paper Baling Machine. Use disassembly and assembly tools correctly and violently knock and damage Nick Baler Waste paper Baling Machine. When using, you can use copper or hammer, or add a soft liner between the work and the vertical head. It is not allowed to replace measuring hammers with measuring tools and files, and use wrenches and chisels instead of wrenches. From the table and back, from the assembly to the parts to the parts, dismantle one by one, dismantle and inspect on the one side.
       The disassembled parts of the Nick Baler Waste paper Baling Machine equipment should be placed in a wooden frame, wooden box or piece tray in order. The pieces are scattered, damaged or rusted due to moisture. In order to avoid confusion during assembly. Nick Baler Waste paper Baling Machine disassembly should be prepared for the assembly of the baler. Check the mark and make the mark. Timing gears, crankshafts and flywheels, connecting rods and connecting rod caps, complete sets of processing or optional coupling parts, and other non-interchangeable parts should be marked according to the original position or sequence before disassembly to avoid confusion during assembly . To sort and store parts, store them according to the size of the parts and the assembly to avoid confusion.

       At present, the application of Nick Baler Waste paper Baling Machine is increasing, and the number of manufacturing companies using Nick Baler Waste paper Baling Machine is also increasing. The fully automatic Nick Baler Waste paper Baling Machine lead frame is composed of 4 sets of wire devices installed on a frame.The entire lead frame is suspended on a central axis of the compression frame, and the horizontal direction of the compression frame is under the action of the hydraulic motor. Movement, the compression frame is a welded member, and the bottom is equipped with wheels, which can move horizontally along the main slide rail under the push of the hydraulic cylinder. The lifting platform is mainly formed by bolting two horizontal beams. The lifting platform can move up and down in the vertical direction under the push of two hydraulic cylinders. In the process of using Nick Baler Waste paper Baling Machine, many enterprises will encounter such and other problems. Next, the editor will analyze the difficulty of Nick Baler Waste paper Baling Machine.as fore more information ,please visit :www.nkbaler.net

   First check whether there are foreign objects in the Nick Baler Waste paper Baling Machine, and then check whether the screws are loose, which affects the normal transportation of the packaging belt. It is necessary to strictly control the gap between the strips, generally between 0.5-1.0 cm. Check whether the bearing of the conveyor baler is broken, and the incorrect position of the cross bar will also cause the problem of difficult belt retraction.

2020-04-07

(As more and more companies use waste paper hydraulic balers, the standard for operating waste paper hydraulic balers has also become a growing concern). Mineral water bottle baler This product has good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in various types of waste paper mills, used materials recycling companies and other unit enterprises. It is suitable for the packaging and recycling of used waste paper and plastic straws. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. The waste paper packing machine is used to squeeze and solidify waste paper and similar products under normal conditions, and use special packaging tape to pack and shape, so that its volume is greatly reduced, so as to reduce the volume of transportation, save freight, and increase benefits for the enterprise. Introduced advanced technology and advanced technology of similar products at home and abroad. With the increasing awareness of environmental protection, the waste paper baler has played a great role. It can reuse some waste paper and it is more and more accepted by everyone. The domestic waste paper baler has been In continuous innovation, we are constantly following the development of some advanced technologies abroad. It's about the safety of the company and the workers themselves
1. Before using the waste paper baling machine, wear working clothes strictly according to the company's system, fasten the cuffs and fasten the buttons to prevent accidents caused by the waste paper baling machine bringing clothes into the machine.
 2. The operators of the baler should be trained before taking up the job, familiar with the structure, performance and use of various parts of the waste paper baler!
3. Before the packing machine is operated, it is necessary to clean the site and clean the oil and debris on the fully automatic waste paper packing machine.
4. The baling machine must be powered off when performing maintenance and repairs, and it is forbidden to bump the start button and handle!
5. Before using the baling machine, perform an idle check to check whether there is noise, whether the fuel tank fluid level is sufficient, and whether there is looseness in various parts, etc.
6. It is strictly forbidden to extend the limb into the working part of the equipment when the baling machine is working, so as not to cause harm to the human body!

7. It is strictly forbidden to disassemble the parts of the baler randomly. If the equipment fails, please contact the professional maintenance staff for troubleshooting.as more information ,please visit us : www.nkbaler.net

2020-03-31

With the continuous improvement of people's awareness of environmental protection, the waste paper hydraulic baler has played a very important role. The advantages of the waste paper hydraulic baler are obvious. The waste paper hydraulic baler can reuse waste paper and has been recognized by customers. Mineral water bottle baler This product has good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in various types of waste paper mills, used materials recycling companies and other unit enterprises. It is suitable for the packaging and recycling of used waste paper and plastic straws. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs.
The newly launched waste paper hydraulic baling press machine has good toughness, beautiful overall appearance, convenient operation, and low investment cost for the entire equipment. It can be widely used in various waste paper mills and waste recycling companies. The hydraulic baling press machine can pack and recycle used paper and plastic straws, etc., which can improve labor efficiency, reduce labor intensity, and introduce transportation costs.
The waste paper hydraulic baler can be used to bundle parts into blocks, which is more conducive to transportation. The hydraulic baler must be constructed on the foundation and leveled using a spirit level. Tips Before installation, pay attention to removing the stolen goods to ensure its working efficiency. The newly produced hydraulic baling press machine uses a hydraulic control system and can be used with confidence.
The waste paper hydraulic baling press machine is composed of a frame system, a hydraulic system, and auxiliary components. The main frame is made of high-quality thick steel plate to ensure its robustness. In addition, it adopts advanced mechanical design to make it more durable.
The hydraulic system uses imported accessories, with high packing pressure, fast speed, durable, and low noise. The waste paper hydraulic baler has the following output methods: flipping, pushing, and manual taking. The waste paper hydraulic baler produced by our company has many advantages, low price, guaranteed quality, and is made by advanced technology. We have excellent after-sales service and can provide customers with free commissioning and installation.as more information ,please visit us : www.nkbaler.com

2020-03-30

With the rapid development of the waste paper baler economy in China, the demand for waste paper baler products in various industries has continued to grow, and industry revenue and profits have achieved a rapid growth of more than 20% for five consecutive years.
With the increasing awareness of environmental protection, the waste paper baler has played a great role. It can reuse some waste paper and it is more and more accepted by everyone. The domestic waste paper baler has been In continuous innovation, we are constantly following the development of some advanced technologies abroad. Fully automatic waste paper baler is a mechatronic product, which is mainly composed of mechanical system, control system, feeding system and power system. The entire packing process consists of auxiliary times such as pressing, returning, picking up, transfer, outbound, outbound, and outbound.
Mineral water bottle baler This product has good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in various types of waste paper mills, used materials recycling companies and other unit enterprises. It is suitable for the packaging and recycling of used waste paper and plastic straws. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs.as more information ,please visit : www.nkbaler.net 

2020-03-19