WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • Waste paper baler is a mechatronics product, mainly composed of mechanical system, control system, loading system and power system. The whole packaging process consists of auxiliary time such as pressing, returning, carrying, transferring, outbound, outbound, and receiving.

    The following is the practice of improving the performance of horizontal waste paper balers.
    1. Improve the footprint of the waste paper baler and achieve the largest possible compression force.
    2. Adopting new rapid pressurization technology to achieve rapid pressurization and improve the working efficiency of the oil pressure system.
    3. For the customer to timely maintain the hydraulic system of the hydraulic waste paper baler, especially to ensure the cleanliness of the hydraulic oil, to prevent the life and reliability of the hydraulic system, resulting in system impact, timely adjustment and adjustment to avoid Causing losses.
    4, to improve the pressure loss of the internal flow channel, the use of high-quality hydraulic components and integrated circuit and runner casting, to reduce the pressure loss of the pipeline, while also reducing oil leakage.
    5. Reduce the damage of the internal pressure of the component system of the hydraulic waste paper baler and reduce the loss of power.as more information ,please visit :www.nkbaler.net

    2019-04-26
    Share:
  • The hydraulic oil filter device of the horizontal waste paper baler generally refers to the oil filter screen. The basic maintenance of the oil cylinder is to ensure the cylinder seal and the surrounding cleaning.
    According to the after-sales statistics, more than 75% of the faults in the hydraulic system are caused by the mixing of impurities in the hydraulic oil. Therefore, it is very important for the hydraulic system to maintain the cleanness of the oil and prevent the contamination of the oil.
    The function of the hydraulic filter is to filter various impurities in the hydraulic oil. The main sources of impurities are:
    Mechanical impurities remaining in the hydraulic system after cleaning, such as rust, cast sand, welding slag, iron filings, paint, paint and cotton yarn, etc., external impurities entering the hydraulic system, such as through the fuel filler and dust ring Ingress of dust; impurities generated during the working process, such as debris formed by hydraulic action of the seal, movement of metal powder caused by relative wear, colloid, asphaltene, carbon residue, etc. of oil due to oxidative deterioration.

    After the above impurities are mixed into the hydraulic oil, with the circulation of the hydraulic oil, the damage will be everywhere, which seriously affects the normal operation of the hydraulic system, such as making a small gap (in μm) and section between the relatively moving parts in the hydraulic component. The small holes and gaps are stuck or blocked; the oil film between the moving parts is destroyed, the gap surface is scratched, the internal leakage is increased, the efficiency is lowered, the heat is increased, the chemical action of the oil is aggravated, and the oil is deteriorated.
    2019-04-22
    Share:
  • The automatic waste paper baler has the characteristics of good rigidity, good stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of basic equipment. Widely used in various types of waste paper mills, waste materials recycling companies and other units. Suitable for recycling of waste paper, plastic straw, etc.

    It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. Fully automatic waste paper balers are used in a wide range of applications.
    However, if the maintenance is not in place, some minor faults will occur, affecting the packaging process, and often, the noise is very high. So, what is the common maintenance method for the automatic waste paper baler? Below, I will introduce the use and maintenance method of the automatic waste paper baler.

    Automatic waste paper baler maintenance method:
    1. Check whether the components of the baler are in good condition before starting the machine; if the screws and nuts of each part are loose, tighten them in time. In the absence of nails and fewer hats, the repairman must promptly notify the process.
    2. Check if the belt armrest is blocked. If there is any debris, we must use compressed air to remove the dust from the rails.

    2019-04-22
    Share:
  • Nowadays, straw hydraulic balers have become the products of many people. They are constantly pursuing product quality, and they are also more and more practical and intelligent. Therefore, Shaanxi Nick Straw Hydraulic Baler Co., Ltd. is developing. Pay special attention to this detail in the process.
     
    First of all, Shaanxi Nick Straw Hydraulic Baler has a perfect hydraulic system to ensure that there is no system oil leakage during the working process. This is one of the reasons why many manufacturers have no solution at present. Secondly, the machine is produced during the work process. The heat causes the machine to have a high failure rate and high maintenance cost. However, the Shaanxi Nick Straw Hydraulic Baler adopts a unique cooling system, including oil cooling equipment and water circulation equipment, and the machine does not experience high temperature. The above two technologies are problems that many manufacturers have no way to solve.
     
    Secondly, at the time of electric welding, the materials are sandblasted or pickled before welding, and all the welding areas are cleaned before welding. The main fillet welds are completed by automatic or semi-automatic welding to ensure sufficient penetration. The butt welding of the steel plates is submerged arc welding to ensure penetration. Welding defects such as slag inclusions, pores, and cracks do not occur in all welds.
     

    2019-04-12
    Share:
  • The main advantages of the waste paper baler motor are good start-up and speed regulation performance, and strong overload capability. The shortcomings of the waste paper baler DC motor are mainly reflected in the current commutation.
    When the waste paper baler works, the waste paper baler motor is faulty. What are the common faults and maintenance methods of the motor?
    1. The normal operation of the waste paper baler motor and pump is due to the abnormal sound of the motor: the motor bearing is damaged; the motor is out of phase;
    2. The reason why the waste paper baler motor cannot be started is: the power supply is not turned on; the fuse is blown; the overload protection action; the control device is wired incorrectly.
    3. The reason for the strong vibration of the waste paper baler motor is that the motor and the mechanical center it drives are inconsistent; the coupling fails; the unit loses balance, the foundation is not strong, and the rotor is set to touch the broom:
    Nick waste paper baler equipment free warranty period of 1 year, master the common faults of waste paper baler motor and check the maintenance method is very important to ensure the normal use of baler equipment.WWW.NKBALER.COM 
    2019-04-10
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
WhatsApp:008615021631102 
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top