After the items are compressed and bundled,they are easy to store and stack and reduce transportation costs.
Today,Nick will give you a detailed explanation of the important hydraulic components of the automatic waste paper compacting baling Machine-the scope and precautions for use of the one-way valve,and the specific functions of the one-way valve.
1.Application occasions.
In the hydraulic system of the automatic waste paper compacting baling Machine,the one-way valve is widely used.It is commonly used in the following situations:used at the outlet of the hydraulic pump to prevent the hydraulic oil from flowing back;used to isolate the connection between the oil circuits to avoid the oil circuit Interference with each other;as a back pressure valve;as a bypass valve.
2.Precautions for selection and use:

When selecting a check valve,in addition to selecting the opening pressure reasonably according to the needs,it should also be noted that when the flow through the check valve is much smaller than the rated flow,the check valve sometimes vibrates.The smaller the flow,the greater the opening pressure.High, the more gas in the oil,the easier it is to produce vibration.

Recognize the direction of the inlet and outlet during installation,and do not install it wrong,so as not to affect the normal operation of the system.It is mainly to install a check valve at the outlet of the pump.You should also pay attention to it.If the inlet and outlet of the check valve are installed reversely,the hydraulic pump may be damaged or the motor may be burned .
Nick Machinery's pressing technology and finishing technology have reached the international advanced level.The fully automatic waste paper compacting baling Machine produced by it has been far ahead,with reliable quality,stable performance and high cost performance.It is a good assistant for your company's production.