Common problems of applying waste carton compression baler:

1. Please confirm the switching power supply used in the equipment. It is not necessary to plug in the incorrect switching power supply. The equipment uses a three-phase four-wire system.
2. During the operation process, do not cross your head over the belt runway.
3. Never use tap water to clean the equipment. When the site is wet and cold during operation, the operator should not work barefoot.
4. When not using the machine, please return the tape in the storage box to the reel to prevent deformation when it is applied.
5. Remember not to unplug the power plug when using the device.
6. Never disassemble or replace parts on the device.

7. The key components should be moistened from the beginning to the end.

2020-05-14

1. Hydraulic configuration: The regenerated oil is fast and low noise hydraulic circuit system, which uses imported and domestic high-quality components to ensure quality and reduce costs, and the performance of the whole machine is stable.
2. Electrical appliance configuration: PLC control is adopted to make the circuit simple, the failure rate is low, and the inspection and elimination are simple and fast.
3. Shearing knife: The internationally-used scissors design is selected to improve the cutting efficiency and extend the service life of the blade.
4. Wire tying device: the latest international wire tying device, saving wire, fast tying, low failure rate, easy to clean and maintain.
5. Conveyor: The conveyor belt adopts new PVC material, which is anti-corrosion and anti-aging. It has the advantages of anti-skid, large transport volume and strong load capacity.
6. The length can be set freely, and the packing value can be recorded accurately.

7. Easy installation, simple foundation construction, no need for foundation reinforcement treatment.

Shaanxi Nick machinery equipment can supply many kinds of baler machine 
Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-14

1. The switching power supply is connected incorrectly. Generally speaking, if there is noise in the new equipment, most of them will be caused by the wrong wire connection. If the wire is wrong, the motor will be turned over, and the noise will be quite large. The customer only needs to replace any two wires in the switching power supply.
2. Grinding chain cover of transmission chain. The waste paper baler will often deform the chain cover due to an accidental impact of the hanging object during transportation or application. Once the deformation occurs, the transmission chain will wear the chain cover, which will also cause a certain amount of noise.

3. Common motor faults.

When the small horizontal waste paper box baler is not used, be sure to unplug the power plug from the power socket. The switching power supply was cut off to prevent electric shock or fire accident caused by power failure. When the heating plate is at a very high temperature, do not put flammable objects around the back of the device, there is a risk of fire accident. Please be sure to carry out actual operations in accordance with regulations.

Shaanxi Nick machinery equipment can supply many kinds of baler machine 
Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-12

It has high polymer dispersion, high electrical conductivity, stable performance, high mechanical strength, good temperature resistance, high concentration resistance and hydrolysis resistance.
It can be automatically disassembled to facilitate inspection and installation of tools and materials. The circuit and control system of the hydraulic baler used in the baler are very simple. It must be used under certain environmental conditions. The original road board can be removed under the set conditions. In good condition.

1. Advantages: Crush the straw into fine sand from the source. It can be used in many places, such as reservoirs, coastal areas, etc., providing drying equipment, which can be used for production in forests, rice fields, nurseries, houses, etc. Using sulfide as fuel, stacking equipment, low noise, clean and sanitary. It saves space and occupies less area, and is easy to repair and maintain. Under certain conditions, a restaurant and kitchen waste landfill can even be formed around the reservoir, which can be used for secondary treatment of the environment, reducing investment and pollution.Shaanxi Nick machinery equipment can supply many kinds of baler machine

Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-11

Proper use of machinery and equipment, careful implementation of the protection and maintenance system and strict compliance with safe operating procedures are necessary conditions for extending the operating life of the straw baler, improving production efficiency and ensuring production.
To this end, it is advocated that users establish protection and maintenance systems and safe operating procedures. In addition to understanding the machine structure and operating procedures, operators must also pay attention to the following points:
1. The straw baler should smooth the smooth parts of the machine as required.
2. Clean up the sundries in the bin after work every day and keep the equipment clean and tidy.
3. The manufacturer of straw baler reminds that those who do not understand the structure, performance and operation rules of the machine without learning should not start the machine in private.
4. When severe oil leakage or abnormal phenomena occur during work, stop the vehicle immediately, analyze the cause and eliminate the fault, and do not force it to run with disease.
5. The oil tank should be cleaned and replaced with new oil once every six months, but the oil should not be filtered for more than one month in the second cleaning. The new oil used once is allowed to be used again after strict filtration.

6. The oil added to the oil tank must be rigorously filtered, and should always adhere to a sufficient amount of oil. If there is a shortage, the oil should be added immediately. The straw baler is filled with smooth oil every 1.5 hours, and 5 to 6 times less smooth oil is added to each smooth part of each shift (8 hours).

Shaanxi Nick machinery equipment can supply many kinds of baler machine

Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-11