Many large-scale cattle farms have insufficient silage,which is mainly supplemented by other straws,such as corn stalk yellow storage,soybean seedling storage,peanut seedling storage,bean pods,etc,and supplementation by local agricultural processing by-products,such as bagasse,tofu residue,and pear Dregs,apple pomace,beer pomace and other by-products.These substitutes are greatly affected by the season,and they are facing constant adjustments in formulas.In the south of the high temperature and humidity,the residue feed is particularly prone to mold and deterioration,and the safety of milk is also facing challenges.Some people say that raising prices,but this is not a long-term solution.
The corn stalk balers can effectively bundle and recycle waste crops of straw,and formulate a packaging plan based on the characteristics of the straw to effectively carry out the work.When the hydraulic cylinder of the corn stalk baler drives the parts with larger mass to make rapid reciprocating motion,because the moving parts of the corn stalk baler have great kinetic energy,when the piston of the corn stalk baler moves to the end of the hydraulic cylinder,it will contact the end cover.Collision,and produce shock and noise.The mechanical impact of the corn stalk baler not only causes damage to the relevant parts of the hydraulic cylinder,but also causes damage to other related machinery.
1.All parts of the corn straw baler should be cleaned with kerosene or diesel oil,and no dirt should be left in the hydraulic cylinder.
2.Disassembly, assembly and cleaning of the corn stalk baler.It is forbidden to wipe the parts with cotton yarn and rags to prevent the fallen cotton yarn from mixing into the hydraulic system.
3.During the assembly process of the corn stalk baler,the surface of each movement pair should be coated with lubricant.
The Nick brand corn stalk baler can effectively bundle and recycle waste straw crops,improve production efficiency,and operate safely.It is a good helper for your production.
2.From a narrow perspective,it can be said that the safe operating environment of the straw baler is an element of the operating group that affects the production system,such as the operating conditions of the terrain and climate.The safe operating environment has this effect on the application and management characteristics of the straw baler.
3.The bearing of 635 under the middle knife is damaged,so it can only be heated and cannot be glued at all.Replace the bearing of the corn stalk baler.
3.During the use of the straw baler,it is strictly forbidden to harrow the ground with the pickers and spring teeth.Pay attention to the prompts of the working condition of the baler and operate according to the instructions of the user manual.