WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588
News Center
You Position : Home >> News Center
  • With the development of technology,the metal chip pressing machine is also constantly upgrading.At present,it can squeeze all kinds of metal scraps,steel shavings,scrap steel,scrap iron,scrap copper,scrap aluminum,aluminum shavings,and metal raw materials into a circle.Pie-shaped.After such treatment,it is convenient for storage,transportation and recycling of various metal scraps.
    A lot of unnecessary troubles can be avoided if the aluminum crumb cake machine strictly follows the operating procedures.

    1.Check whether the oil level of the oil tank level gauge is in the normal position.If it is not displayed,add oil until the level gauge can see the oil level.Ensure that the fuel tank is filled with 60% to 80% oil before starting the motor.

    2.Press the "Start" button,the running indicator light is on,and listen to whether the sound of the oil pump is abnormal.If there is any abnormality,shut down immediately for inspection.

    3.Turn the manual switch to manual,and operate the main cylinder,the pumping cylinder,and the feeding cylinder two or more times without feeding the empty machine,and observe whether it can work normally and whether the pressure gauge normally reaches the set value.Whether there is oil leakage at the road and joints.

    4.Manually press one or more pieces of material,and observe whether the punch and die sleeve are loose and offset.

    5.After confirming that each part is normal,switch to automatic operation.Continuously observe the operation status of each program during operation.If there is a stagnation,oil leakage,etc,it should be shut down immediately,and an experienced maintenance worker is required to check and repair.

    6.The operators of each shift should clean the machine before leaving work,clean up oil and dust,and keep the inside and outside of the electrical control cabinet tidy.
    The Nick brand aluminum crumb cake machine is easy to operate and automatically packs out,which improves work efficiency.The installation of emergency stop settings makes the operation safer.
    2020-09-02
  • Specialized in recycling and compressing the loose materials like plastic films ,PET bottles, plastic pallets ,waste paper ,grass ,fiber ,used clothes ,cartons ,cardboards trims ,scrap ,etc .


    Full Horizontal Auto-tie Baler

    Model

    Bale size (mm)

    Bale weight(kg)

    Capacity

    Motor

    NKW40Q

    700*700*1200

    350-550

    3-5 T/H

    30HP

    NKW60Q

    850*750*1200

    350-550

    5-7T/H

    40HP

    NKW80Q

    1000*800*1200

    500-700

    8-10T/H

    60HP

    NKW100Q

    1000*1000*1400

    800-1000

    12-15T/H

    80HP

    NKW120Q

    1100*1100*1200

    1000-1200

    15-18T/H

    100HP

    NKW160Q

    1100*1100*1400

    1100-1400

    18-20T/H

    120HP

    NKW180Q

    1100*1100*1600

    1200-1500

    20-25T/H

    120HP

    NKW200Q

    1100*1100*1600

    1200-1600

    25-30T/H

    150HP

    NKW250Q

    1100*1250*1600

    1300-1700

    30-35 T/H

    180HP

    for more information ,please visit us : www.nkbaler.com  or whatsapp us :+86 15021631102 
    Nick Baler Baling Machine is one of professional baler factory in china for many years ,which is export for 40 countries with good quality and  sale service ,contact us now .

    2020-05-09
  • Lifting the horizontal hydraulic baler, it is not unfamiliar to everyone, for packaging equipment, belonging to equipment accessories. It is mainly used for the packaging of waste paper (cardboard boxes, newsprint, etc.), waste plastics (PET bottles, plastic film, turnover boxes, etc.), straw and other loose materials. Significantly reduce volume, increase density, and facilitate transportation and storage. It is a powerful helper for comprehensive utilization and development of material energy. So, what is its scope of adaptation? Let Nick Machinery Equipment Company introduce it to you.

    First, the general-purpose hydraulic baler is suitable for straw, forage, waste paper packaging, cotton packaging, garment packaging, straw packaging, plastic packaging, wool packaging, recyclable garbage packaging, but also can be applied to cotton, wool, waste cardboard boxes, waste Cardboard, yarn, tobacco, plastic, cloth, woven bags, knitted velvet, hemp, sacks, tops, hair balls, crepe, silk, hops, waste plastic bags and other soft materials such as light foam and loose materials.
    Second, the motor series products are widely used in metallurgy, petroleum, chemical, machinery manufacturing and other industries.
    Third, the cotton machine series products are mainly cotton processing equipment and accessories for cotton processing plants.
    2019-11-11
  • First of all, we should first select products according to the packaging effect and the size of the package. Besides, vertical balers and horizontal balers can finish packing. So what's the difference between vertical balers and horizontal balers?

    2019-06-09
  • Cardboard baler uses one or more metal plates and a hydraulic arm, 

    pushing the plate down on cardboard with enormous pressure. 

    Cardboard Bailer compacts the cardboard into a large, dense  rectangular or cube box which is typically held together by its own internal pressure. Then this bale is  tied with metal wire to secure it together and placed on a pallet which allows it to be moved through the use of a forklift or pallet jack.

    2018-11-08
Shaanxi Nick Machinery Equipment Co. LTD 
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:nk@nkbaler.com  Nickbaler888@gmail.com
WhatsApp:008615021631102 
Copyright © 2018 NKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top