2.If it is necessary to strike,you can use a copper or lead hammer,or add a soft liner between the work object and the hammer head.It is not allowed to take a measuring tool,a knife instead of a hammer,and a blunderhead or chisel instead of a wrench use.
Therefore,you must pay special attention to the method when disassembling the hydraulic cylinder.If you need it,you can contact our Nick Machinery. We have dedicated after-sales personnel to serve you wholeheartedly.
The so-called adhesive wear is the phenomenon that the material on the contact surface is transferred from one surface to another due to solid phase welding at the contact point. When the horizontal compacting baling Machine is welding,the temperature at the real contact point presents two different conditions,which may be greater than or not greater than the melting point.
The second is normal wear and tear.All the wear and tear that occurs within the stipulated promise will be attributed to it.In the initial stage of wear and tear,the appearance of conflict will have corresponding roughness.In general,the smaller the real contact surface,the faster the wear will be.When the appearance of the parts is gradually flattened,the horizontal waste paper compacting baling Machine has entered a normal and stable wear stage.
3.The quality of the hydraulic oil selected for the bale compactors equipment,the quality of the hydraulic oil directly determines whether the cylinder can play a large role,but also directly affects the failure rate and service life of the cylinder.To ensure that the bale compactors production must use high-quality genuine No.46 anti-wear hydraulic oil.
4.The operating convenience,control performance and low failure rate of the hydraulic waste paper bale compactors control system also determine the baling efficiency of the bale compactors.
2.Reduce wear.The lubricant film formed on the friction surface can reduce friction and support the load,so it can reduce surface wear and scratches,and maintain the matching accuracy of the rice husk baler parts.
3.Prevent corrosion.The lubricant film on the friction surface can isolate the corrosion of the friction surface by environmental media such as air,water vapor and corrosive gases,and prevent or slow down rust.At present,many lubricating greases are also added with corrosion inhibitors or rust inhibitors.
The after-sale service of the straw baler is the most intimate.