1.Check whether the oil level of the oil tank level gauge is in the normal position.If it is not displayed,add oil until the level gauge can see the oil level.Ensure that the fuel tank is filled with 60% to 80% oil before starting the motor.
2.Press the "Start" button,the running indicator light is on,and listen to whether the sound of the oil pump is abnormal.If there is any abnormality,shut down immediately for inspection.
3.Turn the manual switch to manual,and operate the main cylinder,the pumping cylinder,and the feeding cylinder two or more times without feeding the empty machine,and observe whether it can work normally and whether the pressure gauge normally reaches the set value.Whether there is oil leakage at the road and joints.
4.Manually press one or more pieces of material,and observe whether the punch and die sleeve are loose and offset.
5.After confirming that each part is normal,switch to automatic operation.Continuously observe the operation status of each program during operation.If there is a stagnation,oil leakage,etc,it should be shut down immediately,and an experienced maintenance worker is required to check and repair.
6.The operators of each shift should clean the machine before leaving work,clean up oil and dust,and keep the inside and outside of the electrical control cabinet tidy.
Specialized in recycling and compressing the loose materials like plastic films ,PET bottles, plastic pallets ,waste paper ,grass ,fiber ,used clothes ,cartons ,cardboards trims ,scrap ,etc .
Full Horizontal Auto-tie Baler
Model |
Bale size (mm) |
Bale weight(kg) |
Capacity |
Motor |
NKW40Q |
700*700*1200 |
350-550 |
3-5 T/H |
30HP |
NKW60Q |
850*750*1200 |
350-550 |
5-7T/H |
40HP |
NKW80Q |
1000*800*1200 |
500-700 |
8-10T/H |
60HP |
NKW100Q |
1000*1000*1400 |
800-1000 |
12-15T/H |
80HP |
NKW120Q |
1100*1100*1200 |
1000-1200 |
15-18T/H |
100HP |
NKW160Q |
1100*1100*1400 |
1100-1400 |
18-20T/H |
120HP |
NKW180Q |
1100*1100*1600 |
1200-1500 |
20-25T/H |
120HP |
NKW200Q |
1100*1100*1600 |
1200-1600 |
25-30T/H |
150HP |
NKW250Q |
1100*1250*1600 |
1300-1700 |
180HP |
Cardboard baler uses one or more metal plates and a hydraulic arm,
pushing the plate down on cardboard with enormous pressure.
Cardboard Bailer compacts the cardboard into a large, dense rectangular or cube box which is typically held together by its own internal pressure. Then this bale is tied with metal wire to secure it together and placed on a pallet which allows it to be moved through the use of a forklift or pallet jack.