There are various kinds of scrap metal resources in daily life, and the sizes are uneven, and it is very troublesome to deal with. If you discard and pile up messy land and pollute the environment, the cost of direct transportation is huge. The emergence of metal shears solves this problem. The problem is that the metal shearing machine can simply cut and process large-sized scrap metal, which is not only convenient for storage, but also for recycling and recycling, which greatly saves transportation costs.
The metal shearing machine has a large shearing force, a wide range of cutting sizes and a wide range of practical applications, and can continue cutting. When it is cut by a high degree of scrap steel, its oil pump can actively reduce the flow, and its motor will not exceed It burns out under load, so the metal shearing machine is the best choice for metal material recycling departments to cut waste.
The metal shearing machine is suitable for cold shearing of metals with various cross-sectional shapes and various scrap metal structural parts, making scrap metal easy to pack, store, and transport, and provide qualified charge for smelting in smelters.

The metal shearing machine has a wide range of applications. It can be used as processing equipment for metal recycling and processing units, as well as for furnace material processing in factory foundries and metal cutting processing equipment in the mechanical construction industry.

NICKBALER metal shearing machine has the characteristics of fast speed, simple structure, stable action, low failure rate and easy cleaning and maintenance. https://www.nkbaler.net

2021-10-29

The safe operation of hydraulic tiger head shears is not only related to the personal safety of the operator, but also affects the quality and performance of the equipment. The manufacturer will train the operator on how to operate and maintain the equipment in order to allow the equipment to work normally for a long time.
What are the precautions for hydraulic tiger head shears?
1. The human body is not allowed to approach the transmission part and the knife edge of the equipment during operation. Pay attention to the safety of the surrounding personnel to prevent the material from lifting and hurting people. When cutting, cut as close as possible to the inside of the knife edge;
2. When the tiger head shearing machine has serious oil leakage or abnormal phenomenon, it should stop immediately, analyze the cause, eliminate the fault, and do not force the operation with the fault;
3. When adjusting the pump, valve and pressure gauge, the tiger head shearing machine must be operated by experienced technicians. If the pressure gauge is found to be faulty, it should be shut down immediately for inspection or maintenance;
4. When the equipment is running, the operator shall not leave the post without authorization. When the work is over or temporarily leave the working position, the power supply shall be cut off;

5. The hydraulic oil should be cleaned and replaced every six months, but the first cleaning and filtering of the oil should not exceed one month. The new oil used once is strictly filtered and allowed to be reused.

The NICKBALER Tiger Head Shearing Machine has reliable performance, convenient operation and simple maintenance. Diesel engines can be used as power where there is no power supply. https://www.nkbaler.net

2021-10-29

Regardless of the performance of the horizontal baler, it can be summarized as the strength of the horizontal baler's execution ability. The work must ensure the stability of the operation to ensure the uniformity of the packages.
So what causes the horizontal baler to not work quickly?
1. The oil supply pressure of the horizontal Baler oil pump cannot meet the flow demand. In order to prevent the occurrence of oil leakage, strict inspection and testing must be carried out before work.
2. If the overflow valve in the horizontal baler is deformed, it will seriously affect the main valve core blockage. The main valve core is blocked in the small opening, which will easily cause some pressure oil output by the baler oil pump to overflow into the tank, causing the baler The flow of CNPC into the actuator is greatly reduced, which slows down the rate of oil supply.
3. The internal and external oil leakage is relatively serious. In fast work, it is easy to cause the oil supply pressure to be too low, but the pressure is much higher than the oil return line. When the piston seal of the Baler machine cylinder is damaged, the two sides of the Baler machine cylinder are easy The accident that caused excessive internal leakage resulted in insufficient rapid movement speed of the cylinder of the horizontal baler, and oil leakage was likely to occur in other parts.

4. A series of reasons such as the lubrication of the guide rail and the poor installation accuracy and assembly accuracy of the oil cylinder in the horizontal baler can easily cause the friction resistance to increase when the baler is working.

The baler produced by NICKBALER has the characteristics of many varieties, complete specifications, strong matching, etc., and can be designed and manufactured according to customer requirements. https://www.nkbaler.net

2021-10-29

With the development of my country’s reform and opening up, the advantages of domestic hydraulic balers have gradually become prominent, and even exported to foreign countries. When people choose hydraulic balers, they often hesitate to make domestic and imported hydraulic balers. Then we will analyze domestic and domestic hydraulic balers. The advantages and disadvantages of imported hydraulic baler.
Imported hydraulic balers have had a great impact on the domestic packaging market. In the initial stage of the development of domestic balers, imported balers have brought batches of good equipment to the domestic packaging market and contributed to the development of the packaging market.
However, the cost of imported hydraulic balers is high, and ordinary small and medium-sized enterprises are not practical at all, which causes troubles. Large and medium-sized enterprises with strength use this imported advanced equipment, so that the products produced by other small and medium-sized enterprises are the same as those of other small and medium-sized enterprises. The growing gap between products has invisibly widened the gap in the consumer market, which is not conducive to the development of the overall market in the long run.

Therefore, the domestic hydraulic baler has significantly improved this situation. Through years of development, the domestic baler has made great progress in the quality of equipment, the technological level of the baler, and the technical performance. The domestic hydraulic baler has made great progress. It can also give products a satisfactory packaging effect in production, and it is low in cost, and small and medium-sized enterprises can also easily buy and use.

Now the domestic hydraulic baler has entered a golden period of development, which is conducive to the further development of the domestic packaging market in the future.
NICKBALER continues to improve technical capabilities, enhance innovation capabilities, and strive to launch more Balers that meet social needs. https://www.nkbaler.net

2021-10-28

The circuit of the hydraulic baler is the key to ensuring the operation of the equipment, so in the use of the equipment, once there is a circuit problem, it will definitely affect its efficiency. Therefore, in order to solve the line problem as soon as possible, we need to understand its operation method in detail to ensure smooth solve.
1. Electrical circuit failure
(1) The electric circuit of the Baler machine is broken, the electromagnet is not energized, and the wire is replaced without a control signal to make the electromagnet energize.
(2) The electrode is poorly welded, the joint is loosened and re-welded, and the joint is welded.
2. The solenoid coil is heated to burnt
(1) Insulation of the coil is poor and leakage occurs. Replace the coil.
(2) If the electromagnet core is unqualified and cannot be absorbed, replace the electromagnet core.

The above is the method to solve the circuit problem of the hydraulic baler. By understanding the method, not only can the problem be solved better, but also preventive work can be done to ensure the stable operation of the hydraulic baler.

NICKBALER hydraulic baler button centralized control, can realize a variety of working methods, simple and convenient operation, safe and reliable operation of the machine. Contact number 86-29-86031588

2021-10-28