Today Nick shares with you some maintenance methods about the touch screen of the hydraulic baler.
1. The operator who uses the hydraulic baler must be familiar with the system principle, master the system action sequence and the adjustment method of each component.
2. Before starting the equipment, check whether all motion mechanisms and solenoid valves are in the original state, and check the liquid level in the oil tank. If the oil volume is insufficient, do not start the hydraulic pump.
3. Generally, the oil temperature should be controlled within the range of 35-55 degrees. In winter, when the temperature in the mailbox reaches 25 degrees, it is not allowed to start the sequential actions of the actuators. The heater should be turned on first for heating, or the oil pump should be started to run the pump empty. In summer, when the oil temperature is higher than 60 degrees, cooling measures should be taken, pay close attention to the heating of the system, and stop the pump in time if there is a problem.
4. The hydraulic baler that has been shut down for more than 4 hours should run the pump empty for 5-10 minutes before starting to work, and then work under pressure.
5. Please inject 25 kg of gear oil before starting the machine (one refueling can be used continuously for more than 10 years), and then tighten the plug of the oil filling hole of the hydraulic baler after refueling.
6. Carefully check the power lines to prevent trouble spots and leakage, and ensure safe power usage.
7. Carefully check the machine motor of the hydraulic baler, the bolts and screws of the connecting parts of the transmission parts can be consolidated, and whether there is looseness, so as to be tightened in time.
8. After turning on the machine, idle for 1 minute to check whether the hydraulic baler machine rotates normally. When it is normal, feed a small amount of material, and wait for the remaining material in the machine to be discharged before it can be loaded evenly.
9. Before loading, be sure to pay attention to the hard debris in the raw materials, and prevent stones, iron blocks, etc. from entering the silo to avoid damage to the machine.

10. The oil filling on the universal joint must be refueled once every 8 hours of operation, and 2-3 drops of oil can be filled at a time. Please put a little wet material before shutting down, so that the material can be discharged smoothly after starting the next day.

The above is the maintenance method of the hydraulic baler touch screen shared by NICKBALER. If you encounter problems in the process of using the hydraulic baler, you can always contact us at 86-29-86031588

2022-09-08

The waste paper baler is used to squeeze the waste paper baler and similar products firmly under normal conditions, and pack them with special packaging tapes to greatly reduce the volume, thereby reducing the transportation volume, saving freight, and increasing benefits for the enterprise. 2022 new waste paper baler features
1. It has the characteristics of small size, light weight, small motion inertia, low noise, stable motion and flexible operation.
2. Horizontal structure, can be equipped with conveyor belt feeding or manual feeding.
3. PLC control, with man-machine interface (touch screen) and inspection monitoring.
4. The floating necking design in the left, right and upper directions is conducive to automatic distribution of pressure on all sides, and can be widely used for packaging of different materials.
5. Automatic Baling Machine to improve packing speed.
6. The spherical structure is used between the pushing cylinder and the pushing head, which has good reliability and long service life of the oil seal.
7. The feeding port is equipped with a distributed shearing knife, which has high shearing efficiency.
8. Low noise hydraulic circuit design, high efficiency and low failure.
9. Easy to install, no foundation required.

10. It has a wide range of applications. It can be used not only as a packaging equipment for waste paper balers, but also as a processing equipment for packaging and compaction of similar products.

The emergence of the waste paper baler has brought a lot of convenience to the waste paper baling station, which not only saves space, but also saves a lot of human resources. Nick Machinery is a professional manufacturer of balers, our website is https://www.nickbaler.net.

2022-09-07

The cow dung filter press is specially designed for the treatment of animal dung. It is mainly used in the filter pressing and compression of various animal dung, such as cow dung, sheep dung, chicken dung, etc. The cow dung water is dehydrated by the cow dung filter press. It can be used as cattle mattress material, bio-organic fertilizer, etc.
Pig dung, cow dung, sheep dung, etc. are processed by a cow dung filter press, which can reduce the processing cost, facilitate storage, facilitate transportation, and save costs.

NKBALER recommends NKBT250 for users, the output can reach 4-6 tons per hour, and the packaging size is 600(D)*500-1000(L).

NICKBALER cow dung filter press adopts the most advanced processing equipment and purchases well-known mechanical parts at home and abroad. The equipment is stable and durable, and the production efficiency is high, which greatly improves the later production efficiency and income for customers. https://www.nickbaler.net

2022-09-06

No matter what equipment is used, only good maintenance work can ensure the use effect. The same is true for hydraulic balers. Only by maintaining equipment can the working efficiency of hydraulic balers be improved. What maintenance work should be done for hydraulic balers?
1. Before shifting gears, check whether the oil pipes are leaking oil.
Scrub equipment regularly, lubricate and oil as needed. Check whether the connecting rod pin of each part is reliable. Wipe to check if the sound of the hydraulic baler is normal.
2. Pay attention before use
Pay attention to operating noise, equipment temperature, working pressure, level gauge, electrical equipment, hydraulic press and comprehensive insurance is all normal.
3. After use

Turn off the power switch, remove the shredded paper and dust, wipe the oil from the equipment trickle surface and rolling surface, and then apply the oil. Clear working field, grooming accessories and special tools. Fill in the shift record and the record when operating the station, and then execute the shift procedure.

For more fault maintenance and maintenance work of hydraulic baler, please pay attention to the website of NICKBALER: https://www.nickbaler.net

2022-09-05

The bagging baler can be applied to corn straw, wheat straw, straw, cotton, wool, waste paper, waste paper boxes, waste cardboard, yarn, tobacco leaves, plastic, cloth, woven bags, knitted wool, hemp, sacks, Tops, wool balls, cocoons, silk, hops, wheat firewood, grass, waste plastic bags and all other light foam and loose materials, waste paper mills, old recycling companies and other units and enterprises are also suitable for waste paper, plastic straw, etc. Packaging and recycling is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. The bagging baler is used to extrude waste paper and similar products into blocks under normal conditions, and package them with packaging tapes to greatly reduce the volume, thereby reducing the transportation volume, saving freight, and increasing benefits for the enterprise.

NICKBALER's bagging machine adopts PLC control system, which is easy to operate and precisely controlled; automatic feeding and conveying device improves feeding speed and maximizes production. https://www.nickbaler.net

2022-09-02