WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • But the defects of the oil pump, the oil tank filter, and the oil pump motor will appear during the use of the automatic hydraulic packer.
    If the oil pump of the fully automatic hydraulic baling machine does not drain, it is necessary to perform maintenance according to the following items.
    1. The chain needs to be lubricated from time to time, and calcium-based grease should be added to the chain pin once a month to keep the tooth surface lubricated.

    2. Pay attention to check whether the oil level of the reducer meets the specified requirements every month, and change the oil of the reducer once every six months.

    3. The waste paper materials must be filtered before entering the feeding machine, and the mineral water bottle packing machine is to prevent the fine metal scraps from entering the feeding machine and jamming the feeding machine.
    Nick has a professional R&D, design and after-sales team. If you encounter any difficult problems during use, you can always contact us www.nkbaler.net.

    2020-09-10
    Share:
  • The automatic hydraulic baler has been constantly innovating,but some people do not know its safe operation.The safe operation rules and procedures of the automatic vertical hydraulic baler must be known!
    1.Check whether the compressed air pressure meets the requirements before starting the machine.
    2.Turn on the CIP cleaning system and clean the feeding system and measuring machine before production to ensure product hygiene.

    3.Turn off the main power air switch of the baler,turn on the power to start,set and check the temperature of each temperature controller,roll the film intact,adjust the color mark, put a section of code ribbon,determine the code date and related characters and the same day production.The product meets the requirements.

    4.Adjust the bagging and check the coding effect.At the same time, open the feeding system to feed.When the material meets the requirements,first open the bag of the bagging mechanism,check the vacuum and heat sealing quality of the vacuum box,and vacuum the bag.After meeting the requirements,start filling materials and start production.
    5.In the production process of the baler,check the quality of the product at any time,and adjust at any time if there is any problem.
    6.The operator is not allowed to adjust certain operating parameters of the machine.If adjustment is required,maintenance and technicians should adjust it together.
    7.If there is a problem with the automatic hydraulic baler or the product quality is unqualified,the machine should be shut down immediately to solve the problem.
    8.The operator of the fully automatic hydraulic baler should pay special attention to the safety of heat-sealing knives,scissors,trolley parts,vacuum boxes,camshafts,measuring cups,measuring cups,conveyor belts,etc.,and to prevent accidents.
    9. For operations on the touch screen,it is prohibited to tap or tap the touch screen with your fingertips,nails or other hard objects,otherwise the touch screen may be damaged.
    10.When the machine is running,the above debugging is strictly prohibited to avoid safety accidents.
    The above points are the precautions for safe operation summarized by Nick Baler.If you want to know more detailed regulations and procedures,please call our phone: 86-29-86031588.

    2020-09-10
    Share:
  • It builds professionalism with concentration,reputation with integrity,and sales with service.
    The waste paper Baling Machine can be installed according to the Nickel Product Installation Manual,but before this,the customer should also make the following preparations:
    1.According to the selected horizontal waste paper Baling Machine model,the manufacturer will give the corresponding foundation construction drawings.In addition,when the horizontal waste paper Baling Machine adopts different installation methods,the foundation that should be built is also different.
    According to the foundation drawings,arrange the site reasonably.Generally,there are three planning considerations for the site.
     1.The installation position of the waste paper Baling Machine;
     2.The storage location of waste paper before packing;

     3.Set up safety cables in the storage area where waste paper is packed.

    2.Installation of horizontal waste paper Baling Machine:that is,the host and conveyor are assembled.This process requires cranes.Reinforce the two,program debugging,equipment test and so on.
    3.Be familiar with the functions of the buttons on the operation panel of the distribution cabinet before use. The packaging of the horizontal waste paper Baling Machine is a cyclic process.After each use,the motor,hydraulic cylinder and other parts are covered to prevent dust or rain from entering.
    Nick Machinery's waste paper Baling Machines continue to work hard to innovate and develop to create more products that are convenient and quick to operate and work more efficiently.
    2020-09-10
    Share:
  • And has encountered various questions about waste paper Baling Machines raised . 
    So Nick Machinery summarized a few points from it to help everyone.
    First:Does the waste paper packer only pack waste paper?This is not the case.The waste paper Baling Machine can compress and pack any scrap,scrap,and straw.The machine has advanced technology and excellent workmanship,and can pack loose materials such as waste paper and carton fibers.Strong practicability and wide application range.

    Second:There is no fixed model,you can customize it according to your own requirements.First,the waste paper Baling Machine is designed and produced according to each manufacturer's different concepts,so the model is not the same.Second,it can be customized according to customer needs,but according to needs Pressure and processing capacity can be determined by design.

    Third:Like other mechanical equipment,this machine also requires routine maintenance.It is actually very simple.It is to pay attention to regular replacement of hydraulic oil to ensure that the oil path is unblocked,and observe whether there are abnormal changes during the production process.If any,it should be dealt with in time.Maintain the good performance of the machine.
    Nick brand small waste paper Baling Machine has good rigidity,toughness and stability,beautiful appearance,convenient operation and maintenance,safety and energy saving,and low investment cost of equipment basic engineering. 
    2020-09-10
    Share:
  • There are so many types of waste paper hydraulic Baling Machines on the market,which is dizzying.Customers feel confused when choosing waste paper hydraulic Baling Machines.Can't help but ask:
    How can I buy a hydraulic waste paper Baling Machine that suits me?

    When promoting waste paper hydraulic Baling Machine,many customers want to buy a special and versatile waste paper hydraulic Baling Machine,preferably a waste paper hydraulic Baling Machine can pack all their products.This idea is understandable,but undesirable.

    Because in practical applications,special machines often exceed five types of waste paper hydraulic Baling Machines,and do not use a waste paper hydraulic Baling Machine for packaging products with very different specifications and sizes.
    As a professional manufacturer specializing in the production of various waste paper hydraulic Baling Machines,Nick Machinery has excellent technology and perfect after-sales service,so that you can choose and use with peace of mind,and look forward to your cooperation.

    2020-09-10
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL: 86-29-86031588
Fax: 86-29-86031588 Sitemap
Add: East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com Nickbaler888@gmail.com WhatsApp: 008615021631102  
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top