WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • With the development of society,our country's science and technology are constantly developing,and this has allowed our country's various industries to be sublimated again in technology.The current technology of the packaging industry has also been improved again.The current research and development of straw Baling Machines is moving in the direction of high speed,multi-function and intelligent control to meet market demand.In order to meet faster production of goods and reduce costs,the future straw Baling Machine requires high-speed production.

    At present,the market has high requirements for intelligent straw Baling Machine,requiring it to be used in combination with production machinery,and continuous work or diversified work methods can also be used.In addition,the cost and failure rate must be reduced,so that the normal productivity can be improved,so now the next step of the straw Baling Machine must be intelligent.However, the current straw Baling Machines cannot meet the requirements of the market,because a series of problems such as low production performance,poor stability and reliability,and unattractive appearance are still affecting the development of the straw Baling Machines.
    I believe that in the future,Nick Machinery’s intelligent straw Baling Machine will always occupy a significant position in the machinery industry.Driven by various aspects of the economy,the straw Baling Machine will also develop better and better,and the potential is endless.
    2020-09-08
    Share:
  • Advantage:
    1.Small size and large capacity The bulk density of straw and straw is generally 20-50 kg/m3,and the bulk density after briquetting is 800-1000 kg/m3,which is convenient for storage and transportation,and is not easy to burn.Under ventilated,moisture-proof and waterproof conditions,the shelf life is 2-3 years or longer.
    2.It has good palatability,briquettes and feed have a unique rich paste,good palatability,high maturity,and good attraction.It can also reduce metabolic diseases and benefit the health of livestock.
    3.It has good nutrients and high digestion and absorption rate.The crude protein content can reach more than 6%,which is equivalent to the nutritional level of medium-sized forage.The feed rate can reach more than 99%,and the digestion and absorption rate can reach more than 60%.

    4.The loss of feed is about 30%,the loss of straw feed is about 15%,and the loss of briquetting is less than 1%,which improves feed utilization and saves feed costs.

    5.Convenient feeding of briquette feed,both dry and wet can also be fed,saving labor,effort and time.
    6.Reduce pollution and comprehensively use straws,return to the abdomen,realize a virtuous cycle of agriculture,reduce the use and pollution of chemical fertilizers,and improve the efficiency of crops.
    The model of Nick brand straw briquetting machine is NKB150/NKB200.If you want to know more about the briquetting machine,you can go to Nick's website:www.nkbaler.net
    2020-09-08
    Share:
  • Matters needing attention in the process of installing the hydraulic oil pump of the waste paper baler:

    1.The installation height,length and diameter of the suction pipe of the oil pump should meet the calculated values,strive to be short and reduce losses (such as elbows, etc.);and ensure that the pump does not exceed its allowable cavitation allowance when it is working.The inner diameter of the oil suction pipe should not be less than the specified requirements.The suction pipe should not be too long.The 90 degree bend should not exceed two.It is connected to the inlet of the oil pump with a soft short connection.The installation height of the oil pump should be such that the hydraulic oil can flow to the suction port of the oil pump.

    2.The quality of the oil pump installation has a very important impact on the smooth operation and service life of the pump,so the installation and correction work should be carried out carefully and not rashly.The support or base of the hydraulic pump must be strong and firm,and the pump shaft of the hydraulic pump must be well aligned with the motor.
    3.The place where the oil pump is installed should be spacious enough to facilitate maintenance work.
    4.The suction and discharge pipelines of the oil pump should have brackets,which are not allowed to bear the load of the pipeline.
    The waste paper baler has brought a lot of convenience to our lives,and we have also made the greatest improvement in its performance as much as possible.The waste paper baler can exert its maximum function and continuously improve the work efficiency of customers.
    2020-09-08
    Share:
  • The straw baler is applied to corn stalks,wheat stalks,rice straw,sorghum stalks,fungus grass,alfalfa grass and other straw materials.It also protects the environment,improves the soil,and creates good social benefits.
    Operation steps of straw baler
    1.Raw material crop straw
    2.Feed into the straw mill or straw rubbing machine for crushing processing
    3.The crushed materials enter the straw baler bin

    4.The material reaches the baling standard(the straw machine or kneading machine continues to feed)


    5.Automatic control cabinet,one key to start packing
    6.Bagging and packaging
    Nick’s company has more types of straw baler,you can open our company’s website www.nkbaler.net to choose,or call our company’s phone 86-29-86031588
    2020-09-08
    Share:
  • This kind of large hydraulic baler is widely used in the green and dry storage of forage grass in animal husbandry.It can save storage space and extend the feeding time of green straw.After packaging and sealing,it will naturally ferment to produce probiotics,beneficial bacteria,lactic acid bacteria,and protein,which will be naturally fermented.Cattle and sheep and other livestock are easily absorbed after feeding,and the growth rate will increase 2%,which greatly reduces the cost of feed transportation and storage,and reduces the labor intensity of workers.It has brought tangible economic benefits to the animal husbandry industry.It is one of the products required for silage reclaiming of medium and large breeding plants.


    This kind of straw baler is mostly used in large farms.Users who do yellow storage and dry storage can use a three-cylinder hydraulic baler,and the effect is better.
    There are more types of straw balers,you can open our company's website www.nkbaler.net various types of straw balers for your choice.Or call our company for consultation 86-29-86031588
    2020-09-08
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL: 86-29-86031588
Fax: 86-29-86031588 Sitemap
Add: East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com Nickbaler888@gmail.com WhatsApp: 008615021631102  
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top