WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • Semi-automatic waste paper baler has gradually been widely used.Today,Nick Machinery will introduce the installation precautions of semi-automatic waste paper baler.
    1.The foundation construction must be carried out in accordance with the foundation plan and leveled with a spirit level.
    2.The dirt must be cleaned up before the machine is installed.If the surface of the parts is corroded,it should be cleaned with kerosene.
    3.Hoist the host after the foundation is solidified.

    4.When installing the hydraulic control system,the joints should be filled with "O" seals to avoid oil leakage.


    5.Install the main pump valve oil circuit,all pipelines must be cleaned,and the oil pump station is placed and leveled.Clean the inside of the oil tank to remove the dirt that enters during transportation,and tie the oil pipe clamps to prevent oil leakage caused by vibration.
    6.According to the electrical schematic diagram,install all the lines to ensure the safe operation of the baler.
    7.A spherical structure is adopted between the pusher cylinder and the pusher head,which has good reliability and long service life of the oil seal.

    Nick semi-automatic waste paper baler is hydraulically driven,safe and durable.Open structure, convenient and quick to pack out,improve work efficiency.


    Nick Company website:www.nkbaler.com,or call: 86-29-86031588




    2020-10-22
    Share:
  • According to the selected material of a machine equipment component,the overall product quality of the equipment can be reflected.Similarly,the following precautions should be paid to how to select high-quality materials for the waste baling machine:

    1.High-quality copper core motors should be used for waste baling machine motors.At this stage,most waste baling machine products are dominated by three-phase electricity,so high-quality motors can not only provide power for them,but also increase machinery and equipment.Performance,reduce manufacturing troubles.

    2.Regarding the selection of channel steel,since most of the waste baling machine  are welded by channel steel electric welding,we must select high-quality standard channel steel,and then pay attention to the production process during the production process.
    3.In terms of gear pumps and regulators,these two are also indispensable parts.Therefore,try to choose standard models from major manufacturers to prevent unnecessary troubles.

    The waste baling machine produced by Nick Machinery perfectly meets your requirements and can serve you better.

    Web:www.nkbaler.net,Tel:86-29-86031588

    2020-10-22
    Share:
  • China's traditional materials industry needs to solve the following problems:
    1.Reasonable use of mineral resources,especially comprehensive utilization of domestic mines.At present,the utilization rate of complex ore in my country is very low.
    2.Improve production process,reduce energy consumption,reduce pollution,vigorously develop circular economy,and attach importance to ecological design.

    3.The development of traditional materials should not be controlled.It is also necessary to grasp the trend of domestic demand and capacity changes,coordinate development,and avoid repeated construction;in addition, the development of steel,non-ferrous metals,cement,plastics and other materials should have a reasonable proportion.


    4.Establish a mechanism to reverse the fact that material production is heavily dependent on resource imports.China's mineral resources are largely dependent on foreign imports.
    My country's traditional materials industry still has a long way to go,and the comprehensive utilization of mineral resources is imminent.How to make better use of it? Among them,the metal baling machine is indispensable.It can squeeze all kinds of metal scraps,steel shavings,scrap steel,scrap iron,scrap copper,scrap aluminum,aluminum shavings and other metal raw materials into qualified furnace materials of various shapes such as cuboids and cylinders.It is convenient for storage,transportation and recycling.

    Nick brand metal baling machine is recognized by many customers with high-quality qualifications and professional craftsmanship according to everyone's actual needs,and is trustworthy.

    WEB:www.nkbaler.net

    TEL:86-29-86031588

    2020-10-21
    Share:
  • The recycling and utilization of waste paper is a measure to reduce waste of resources and greatly increase production efficiency in our country.

    Before the horizontal waste baling machine packs waste paper,the waste paper must be sorted,processed,and deinked before it can be packaged.If the waste paper recycling process is not strictly sorted.This results in mixing of different types and grades of waste paper.In this way,it is difficult for paper mills to produce different products using different types of waste paper,which affects the quality of waste paper recycled pulp and increases costs.


    At the same time,the ability of the production process of the horizontal waste baling machine cannot be brought into full play.For horizontal waste baling machine raw material purchasers,there are few waste paper warehouses during the storage and custody of waste paper,and they are generally stacked in the open air,which can easily cause the quality of waste paper to decrease due to the sun and increase the loss.

    The horizontal waste baling machine produced by Nick Machinery will help you develop new markets with new technologies,new processes,new additives and new equipment in the development and utilization of waste paper raw materials.

    Company website:www.nkbaler.net,or call:86-29-86031588 

    2020-10-21
    Share:
  • 1.When we remove the upper panel,we must first cut off the power switch,unplug the power supply,and then repair and adjust the plastic bottle baler machine.
    2.During the operation of the machine,it is forbidden to put your hands or head into the frame.If you put your head or hands into the frame,it will cause harm to your body.

    3.Pay attention to some matters when using electrical components,such as turning off the power switch and unplugging the power plug when repairing or adjusting the plastic bottle baler machine.When the power is turned on,touching the electronic control box and transformer with your hands will cause electric shock.In addition,the external insulation is damaged,and contact with the body may cause an electric shock accident,which is very dangerous.

    4.Regarding the heater,if the heater is in a high temperature state (about 230 degrees),if you touch it directly with your hands,you will get burned.After cutting off the power,we have to cool down for a period of time before returning to normal temperature.
    Nick Machinery reminds you that safe production is the first priority.The plastic bottle baler machine produced by our company is easy to operate,easy to maintain,safe and energy-saving,and can better serve you.
    Nick Company:www.nkbaler.net,or call: 86-29-86031588
    2020-10-20
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL: 86-29-86031588
Fax: 86-29-86031588 Sitemap
Add: East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com Nickbaler888@gmail.com WhatsApp: 008615021631102  
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top