The waste recycling station is in a connecting position in the entire waste recycling industry chain.Therefore,the purchase price and selling price of recycling stations directly affect the cost of the waste recycling industry.
Nowadays,many domestic enterprises in our country are also responsible for environmental protection and resource recycling.In terms of waste recycling,the ideal goal is to return from resources to resources.
For example,for the cans used for packaging beer and beverages,the scrap baler can separate aluminum and iron.This will not only improve economic efficiency,but more importantly,it can achieve the best use of materials and maximize resource conservation.

Working efficiently on the recycling industry chain can also make a fortune.

The aluminum-iron separation technology can separate the iron and aluminum components in the cans,which not only completes the reuse of resources,but also improves the added value of recycled products.

Wastes are wastes only when they are mixed together.Once sorted and recovered,they are all treasures,which can also create more economic value.
Nick brand scrap baler is easy to operate,safe and energy saving,and is your best helper.
For more information about hydraulic baler,contact 86-029-86031588 or visit: www.nkbaler.net

2020-11-10

The hydraulic metal baler is to achieve the purpose of baling by exerting a certain pressure on the material.During its operation,it can be divided into three operating stages.
Today Nick Baler will take you to know what these three stages are?
After the hydraulic metal baler starts,it will enter the working state.

The first stage is simply to use the box cover to compress the metal material;then the force increases,this pressing force will further increase,and thus enter the initial tightening stage,this tightening may be any two punches in different directions The punching movement performed.

In the first phase of survey materials,it has basically been compacted,but it has not been completed yet,and it needs to be completed through the final tightening phase.
In these three stages,the direction of the force may be different,and the effect after the action is also different,but the ultimate goal is to better complete the packaging process.
The Nick brand metal baler is hydraulically driven,easy to operate,stable in work,and automatic out of the package.It is a good helper for your production.
For more information about hydraulic baler,contact 86-029-86031588 or visit: www.nkbaler.net

2020-11-10

Everyone knows the hydraulic baler,so what are the ground requirements before the hydraulic baler is installed?Or can you install it at will?
Of course,you can't install it casually,you must follow the points below.
1.The materials used to set up the hydraulic baler must be qualified.The hydraulic baler rods,connectors and fasteners with defects such as deformation and cracks are strictly prohibited to use.The fasteners and connectors of the hydraulic baler shall not be repaired by welding. .

2.The foundation ground of the hydraulic baler must be flat,compact and hard,and its metal base plate must be flat without any deformation.When the ground is soft,a sweeping rod or pad must be used to increase the force surface and increase stability.

3.All hydraulic balers must be installed in accordance with relevant standards and regulations(the hydraulic balers must be horizontal and vertical,and the span and spacing must meet the requirements of the specifications).No matter what height the hydraulic baler is set up,instability is not allowed.
4.The springboard on the hydraulic baler must be neatly laid,and the width and length should be consistent (except for special parts).The springboard on any hydraulic baler must be fixed firmly,and there must be no large holes on the platform(except for special parts).
If you have any questions,please call Nick Company:86-29-86031588 or visit us : www.nkbaler.net 

2020-11-09

The maintenance and lubrication of hydraulic baler must be done regularly.First of all,pay attention to keep the hydraulic baler dry,do not let it rain,or put water on it.
Secondly,we must do the following:
1.Remove the debris or stolen goods from the hydraulic baler once a week

2.Clean,maintain,and lubricate the upper slide once a month,and add a drop of appropriate lubricant to all connecting shafts once a week.

3.Do not add too much every time you add oil to avoid malfunction of the micro switch due to oil immersion.

Nick hydraulic baler is your best choice for automatic bundling,fast speed,simple structure,simple action,low failure rate and easy cleaning and maintenance.

Nick Baler website:www.nkbaler.net,or call:86-29-86031588

2020-11-09

According to the purpose of the shearing machine,the shearing machine can be divided into two categories:head shearing machine and cut-to-length shearing machine.
The characteristic of the shearing machine is that it can shear the moving rolling piece horizontally,and it has three basic requirements:

1.The shear blade should move with the moving piece when cutting the rolling piece,that is,the shear blade should complete both cutting and moving at the same time,and the instantaneous speed of the shear blade in the moving direction of the piece should be the same as that of the rolling piece.The moving speed of the pieces is equal or greater than 2% to 3%.

2.According to different product varieties and specifications and user requirements,the same shearing machine should be able to cut multiple specifications to length,and make the length tolerance and the quality of the cut section meet the relevant national regulations;
3.It can meet the requirements of rolling mill or unit productivity.
According to the actual needs of everyone,the Nick brand shearing machine has been recognized by many customers with high-quality qualifications and professional craftsmanship and is trustworthy.

2020-11-07