WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • The horizontal waste paper baler Press is a kind of equipment that can pack and bundle waste paper items.However,the horizontal waste paper baler Press often leaks when it is working,so the horizontal waste paper baler Press mainly leaks What are the reasons for it?

    1.The sealing ring of the cylinder of the horizontal waste paper baler Press is damaged.The downward pressure of the cylinder is driven by the air source in the cylinder to push the cylinder downward,but when the sealing ring in the cylinder is damaged,the cylinder cannot form a sealing effect. At this time,the cylinder will leak air,and then the horizontal type The waste paper packer cannot work properly.

    2.The solenoid valve is leaking.The solenoid valve of the horizontal waste paper baler Press is a linking device between the intake pipe and the cylinder.Although it is not part of the cylinder,its function is also the same.When the solenoid valve is used for a long time,air leakage will also occur.
    3.The triple parts are damaged.
    Therefore,we must carefully check during production and pay attention to the daily maintenance of the baler Press.
    If you are interested in the waste paper baler Press or have any questions,please log on the website of Nick Company: www.nkbaler.net, or call: 86-29-86031588

    2020-10-19
    Share:
  • The purpose of the scrap steel shearing machine:It is used for cold shearing of scraps such as round steel,square steel,angle steel,I-beam,plate steel,steel pipe,etc.,cut-to-length shearing of hot-rolled small steel,and steel rolling Cut-to-length of factory-shaped steel,etc.
    Advantages of scrap steel shearing machine:
    1.Reasonable design structure:Reasonable use of lever principle,crocodile mouth structure,stronger bite force than traditional flat shears,and lower power consumption.

    2.High safety factor:The shearing work must be carried out after obtaining the pressure cylinder work program.The scrap steel shearing machine has two cylinders,one is the main pressure cylinder,which is responsible for the shearing work,and the other is the pressure cylinder.Responsible for compacting the shearing material.Simply put,the shearing cylinder can work only after the material pressing cylinder is in place to prevent shaking,jumping,splashing and other conditions of the sheared material.Sequence control is more secure.

    3.Hydraulic drive:smooth cutting,low noise, easy installation,no foundation required,high-quality high-pressure oil pump for oil supply,stronger stability.
    4.Fast shearing speed:using large-diameter high-quality hydraulic valve block,no leakage,large flow,installation of return acceleration device,after the material is cut,the shearing cylinder accelerates when it returns,thereby increasing speed and efficiency.
    5.The quality of the blade is good:the use of high-quality high-hardness alloy materials and special processing technology ensure that the normal service life of the blade is twice that of the counterpart products.
    Nick brand the scrap steel shearing machine operation is simple,and the package is automatically delivered,which improves work efficiency.The installation of emergency stop settings makes the operation safer.
    Nick Company: www.nkbaler.net,or call: 86-29-86031588
    2020-10-19
    Share:
  • Technology is advancing,and the machinery and equipment of scrap bailer presss are also being upgraded.
    Scrap bailer presss have also been manually tightened from the most preliminary,and later semi-automatic bailer presss have been developed to fully automatic bailer presss in recent years,and they have quickly become mainstream equipment in the market.
    Automation also reduces many harms caused by human operation.So,what are the advantages of fully automatic hydraulic bailer press?
    1.Fully automatic hydraulic bailer press is more efficient than manual and semi-automatic bailer press,and it also reduces the labor intensity of workers.

    2.The density of bales produced by the automatic hydraulic bailer press is greater.Save transportation costs.

    3.The printed package has a more regular appearance and is not easy to open.It can also improve the technical strength and corporate image of Nickelodeon.
    4.Due to the high density of waste products packed into the hydraulic bailer press.Less pollution to the environment.
    Nick brand automatic scrap iron bailer press has simple structure,stable work,automatic bale delivery,low failure rate and easy cleaning and maintenance,which can better serve you.
    WEB:www.nkbaler.net.   TEL:86-29-86031588
    2020-10-16
    Share:
  • What methods can the waste paper bailer press use to check whether the equipment is normal before production and how to operate it?
    1.No-load test machine

    Turn on the power of the waste paper hydraulic bailer press,loosen the system overflow valve to make the system overflow safely,start the motor (using the method of stopping after starting),and observe whether the rotation of the motor is consistent with the sign of the oil pump.Start the motor and observe whether the oil pump is stable and reliable during operation.Whether there is significant noise in the pump,if not,the test machine can be carried out. Gradually adjust the overflow valve handle of the waste paper hydraulic bailer press so that the pressure value is about 8Mpa.Operate according to the order of operation,single-act each cylinder,observe whether it runs smoothly without vibration,and gradually adjust the main pressure cylinder and side pressure The parallelism between the cylinder and the bottom plate and the side frame,fix the main pressure cylinder and the side pressure cylinder,and use the adjusting support to support the tail of the cylinder.

    2.Load test machine
    (1)The load test can be performed after the operation of the single cylinder is familiar.
    (2)Adjust the pressure of the waste paper hydraulic bailer press system to make the pressure display value about 20~26.5Mpa,and tighten the nut.Do several packing sequences in the order of operation.Feed material to the compression chamber.The load test adopts the form of physical packaging.Press 1~2 bales and hold the pressure for 3~5 seconds after the stroke of each waste paper hydraulic bailer press cylinder is in place. Perform a pressure test on the system to observe whether there is any Oil leakage,if any,should be eliminated after the system is depressurized.

    Customers can choose their own models according to their actual conditions.Because of their obvious advantages,the fully automatic waste paper bailer press occupies a larger market share.

    Nick brand automatic waste paper bailer press has simple structure,stable action,simple operation,low failure rate and easy cleaning and maintenance.It is a good helper for your production.

    WEB:www.nkbaler.net.Tel:86-29-86031588
    2020-10-15
    Share:
  • The semi-automatic hydraulic bailer press is mainly suitable for the compact packaging of personal and corporate items such as large waste recycling stations,paper mills,carton factories,chemical fiber factories, etc.
    Such as waste paper boxes,leftovers from carton factories,beverage bottles,plastic woven bags,straw,bark,sawdust,bagasse,wool,waste clothes and other loose items.

    The packaged items not only reduce the storage space,but also reduce the transportation cost during transportation.At the same time,it is conducive to environmental protection and the recycling of waste products.


    The structure of the semi-automatic hydraulic bailer press is mainly closed-end and open-end structure.The closed-end structure can increase the density of bales and is suitable for more compact packaging of items.
    Hydraulic door opening and closing,manual strapping,safe and quick operation.
    Open structure,locked on both sides,continuous bag delivery,automatic rope (wire) or hook rope (wire),automatic binding,faster operation.
    Nick brand semi-automatic hydraulic bailer press is safe,reliable,low power consumption,economical and reasonable,easy to use,simple to maintain and operate.It is a good helper for your production. 
    WEB:www.nkbaler.net.TEL:86-29-86031588
    2020-10-15
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL: 86-29-86031588
Fax: 86-29-86031588 Sitemap
Add: East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com Nickbaler888@gmail.com WhatsApp: 008615021631102  
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top