The noise generated by the price of the waste plastic baler for normal production operations has caused a noise problem that cannot be tolerated during operation. The metal briquetting machine adopts advanced hydraulic transmission technology and uses high-quality wear-resistant oil seals. The cylinder is processed and assembled with the latest domestic high-tech technology to ensure that the continuous operation does not reduce the cylinder pressure, is durable and runs smoothly; computer control, high degree of automation, Low failure rate, easy protection, etc.

The price of waste plastic baler This machine is used to knead waste paper and similar products under normal conditions, and pack it into a special packaging tape to greatly reduce the volume, and then reduce the transportation volume, save the freight, and add benefits to the enterprise intention of. Then clarify that the machine has problems in some aspects, and the reason for the price noise of the waste plastic baler may be improper operation and control, or the daily protection is not in place.

In view of the noise problem in the price packing process of waste plastic baler, several solutions are proposed according to different situations.
1. Check whether the pilot valve is worn and whether it can be tightly fitted with the valve seat. If it is abnormal, replace the pilot valve head.
2. Check whether the pressure regulating spring of the pilot valve is deformed or distorted. If it is deformed, change the spring or the pilot valve head.
3. Check whether the oil pump and the motor coupling device are concentric and centered. If they are not, they should be adjusted.

4. Check the price of waste plastic baler if there is any vibration in the pipeline, and add sound insulation and vibration damping pipe clamps to the vibration.

5. The joints of the oil confluence of double pumps or multiple pumps should be reasonable, otherwise vibration and noise will occur due to vortex cavitation. There may be only one problem phenomenon, but there are many different reasons for this phenomenon. In the production process, it is necessary to continuously accumulate experience and master relevant technical knowledge, so that the price of waste plastic baler can be smoothly produced.
Our company is committed to the production of packers, with a complete range of features, reasonable design, beautiful models, convenient operation, accurate accuracy, etc., in the future, we will continue to research and innovate, better serve consumers, and make consumers more assured.as for further information ,please vist :www.nkbaler.net

2020-07-30

Most of the Agricultural Agricultural Agricultural straw balers on the market are equipped with AC motors. Such motors will show a very strong pulling force when working. In severe cases, the cartons may be broken, and the baling process is very noisy. The movement of the movement is also very serious. In view of the emergence of the above-mentioned problems, after repeated trials, the research and development personnel have introduced a Agricultural Agricultural Agricultural straw baler with a DC motor.

The DC motor has very low noise during working, and is suitable for use in relatively quiet places such as offices and libraries. The biggest advantage of this configuration is that its tightening process is a very smooth transition process, rather than an instantaneous strong pulling force. The packaging process will protect the packaging from damage, and the damage to the dedication is also very small.

The configuration of DC motors is the general trend of the baler in the future, but this configuration method requires continuous testing and improvement on the Agricultural Agricultural Agricultural straw baler and Agricultural Agricultural Agricultural straw baler, but we believe that the development of technology will definitely have a higher level of breakthrough.

Our company is committed to the production of packers, with a complete range of features, reasonable design, beautiful models, convenient operation, accurate accuracy, etc., in the future, we will continue to research and innovate, better serve consumers, and make consumers more assured.

2020-07-30

1. The Baler speed is fast, and it only takes 1.5 seconds for each strap to complete; the use of instantaneous heating technology enables the heating plate to complete the heating work within 5 seconds, and the time sticks to the best Baler condition;
2. The use of high-quality relays for circuit control, which effectively increases the duration of equipment use;
3. The 2mm-thick decoration panel is used, which is 1.5 times the thickness of the panel of the old Alfalfa Hay baler. It is useful to deal with the heavy goods in the past, and the panel is slightly deformed due to long-term use;

4. The height of the table top of the Alfalfa Hay baler is moderate, and the operation and control are simple and convenient, and it is more convenient and suitable for Baler lighter items. The price of Alfalfa Hay baler is mainly applicable to steel mills, recovery processing occupations and non-ferrous and ferrous metal training occupations. The price of the Alfalfa Hay baler can knead all kinds of metal scraps into qualified furnace materials of various shapes such as cuboid, octagon, cylinder, etc., which can reduce the transportation and training cost and increase the furnace casting speed. Newspaper baler This machine is used to knead Newspaper and similar products robustly under normal conditions, and pack them with special packaging tapes to greatly reduce the volume, and then reach the goal of reducing shipping volume, saving freight, and adding benefits to enterprises intention. Price application of Alfalfa Hay baler: The price of Alfalfa Hay baler can be used for various non-metallic compression baler. Such as: cardboard, carton, shredded paper, cotton yarn, wool ball, plastic, grass and wood, sponge, wool, loose fiber, clothing, cloth, tobacco, plastic and other light foam and loose materials.

5. The cutting blade used in the price of the Alfalfa Hay baler is made of stainless steel and cast iron. After the fine processing of quenching, the service life has reached about 4 times the price of the old-fashioned Alfalfa Hay baler;
6. After improved planning and meticulous manufacturing by the professional research and development center, the scope of application of the price of the Alfalfa Hay baler has been continuously expanded, and the large and small packaging is no longer restricted, and the baling operation can be carried out only by adjusting the parameters of the machine;
7. The price of the Alfalfa Hay baler belongs to the mechanical structure, and some key components use imported parts, the blade is more stable and reliable, and the adjustment is convenient;

8. If the Alfalfa Hay baler price is not acted upon for a long time, it will automatically shut down and enter the standby state, saving electricity;

Nick Baler Hydraulic Baler Factory will never stop, will continue to improve the quality and function of the product itself, and produce better quality mechanical equipment for a wide range of users. Thank you for your support!

2020-07-29

The use of Newspaper baler prices in the newspaper industry is also endless, but the past applications are often limited to manual bundling, and all unmanned operation controls have not been completed. In recent years, following the economic development and the rapid development of the newspaper industry, the circulation of newspapers has greatly increased. The manual packaging in the past has been completely unable to satisfy the demand for circulation. Therefore, the demand for unmanned production and packaging lines is burning eyebrows!

As we all know, the price of traditional hydraulic Newspaper baler is powered roller, but because the paper of newspaper is soft, the printed newspaper is not neatly packed, and the newspaper generally needs to be packed into a cross, which is relatively simple to transfer, which is The price of paper baler puts forward new requirements, not only to complete cross-Baler, but also to pack newspapers. The price of Newspaper Newspaper baler This machine is used to knead Newspaper and similar products robustly under normal conditions, and package them with special packaging tapes to greatly reduce the volume, and then reduce the shipping volume and save freight, which is a great benefit for enterprises. The intention to add benefits.

In view of this situation, the solution is: the hydraulic Newspaper baler price table is driven by a belt, so that the problem of transportation can be handled, and at the same time, obstruction equipment is installed at the front end of the Newspaper baler price frame, which can complete the newspaper Clean up, install a circular rolling device at the back end of the Newspaper baler price, and then complete the function of rotating the newspaper 90 degrees.
The metal briquetting machine adopts advanced hydraulic transmission technology and uses high-quality wear-resistant oil seals. The cylinder is processed and assembled by the latest domestic high-tech technology, and then the continuous operation does not reduce the cylinder pressure, is durable and runs smoothly; computer control, high degree of automation, Low failure rate, simple protection, etc. The price of Newspaper Newspaper baler is used to knead Newspaper and similar products robustly under normal conditions, and package them with special packaging tape to greatly reduce the volume, and then reduce the transportation volume, save freight, and add benefits to the enterprise intention of. Introduced advanced skills and advanced technology of similar products at home and abroad. After such a series of tasks are completed, the newspaper will be presented in a perfect packaging method.
Nick Baler Hydraulic Baler Factory will never stop, will continue to improve the quality and function of the product itself, and produce better quality mechanical equipment for a wide range of users. Thank you for your support!

2020-07-29

1. The baler should be well fixed during installation: because the machine is running fast, uneven ground may cause the machine in vibration to shake, causing hidden dangers to the operator. Therefore, keep the ground level and install the machine according to the instructions to keep the machine stable. When the machine is running, it is prohibited to touch the moving parts of the machine with your hands. 

2. Electrical power to the machine: ground the machine power to avoid electric shock caused by improper operation. There must be an automatic shutdown device for the power supply, so that the machine can automatically stop when there is an electricity problem to avoid electric shock and other conditions. 
3. Cleaning of the machine: Because the baler often compresses waste products, etc., it will be blocked by debris after a long time. Sometimes it will cause the machine to run poorly, cause damage to the machine, and reduce the service life of the machine. The machine should be cleaned regularly, and lubricating oil should be regularly applied to the parts that need lubricating oil. 
4. The operator of the machine should do a good job of protection, such as wearing gloves, and prohibiting the head and hands from reaching the inside of the machine. Non-machine operators should keep a distance from the machine as much as possible to prevent damage caused by material splashing.

Warning note: All products are tested before leaving the factory. Customers are requested to add hydraulic oil before connecting to the power supply after receiving the goods to prevent damage to the hydraulic pump due to dry grinding. 1. The pressure of this product has been adjusted when it leaves the factory, and the booster screw of the reversing valve and overflow valve has been lead-sealed, (or the locking back nut is locked) during use, it is not allowed to remove the lead seal or loosen the back nut for pressure To prevent damage to the mechanical parts caused by excessive pressure adjustment and affect normal use.

At present, the baler market is mixed, and many manufacturers or distributors report parameters indiscriminately. If something goes wrong, regardless of the after-sales service, they blindly reduce the quality and lower the sales price. As a result, the customer suffers heavy losses and is unreasonable. In response to market chaos, we promise to be a conscientious enterprise! Ask customers carefully during sales, and be sure to provide customers with suitable models; solve problems in time after sales; make products and character with one heart and soul, and resolutely refrain from price wars! for more information ,please visit :www.nkbaler.net

2020-07-28