WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • The hydraulic metal baler is to achieve the purpose of baling by exerting a certain pressure on the material.During its operation,it can be divided into three operating stages.
    Today Nick Baler will take you to know what these three stages are?
    After the hydraulic metal baler starts,it will enter the working state.

    The first stage is simply to use the box cover to compress the metal material;then the force increases,this pressing force will further increase,and thus enter the initial tightening stage,this tightening may be any two punches in different directions The punching movement performed.


    In the first phase of survey materials,it has basically been compacted,but it has not been completed yet,and it needs to be completed through the final tightening phase.
    In these three stages,the direction of the force may be different,and the effect after the action is also different,but the ultimate goal is to better complete the packaging process.
    The Nick brand metal baler is hydraulically driven,easy to operate,stable in work,and automatic out of the package.It is a good helper for your production.
    For more information about hydraulic baler,contact 86-029-86031588 or visit: www.nkbaler.net

    2020-11-10
    Share:
  • Everyone knows the hydraulic baler,so what are the ground requirements before the hydraulic baler is installed?Or can you install it at will?
    Of course,you can't install it casually,you must follow the points below.
    1.The materials used to set up the hydraulic baler must be qualified.The hydraulic baler rods,connectors and fasteners with defects such as deformation and cracks are strictly prohibited to use.The fasteners and connectors of the hydraulic baler shall not be repaired by welding. .

    2.The foundation ground of the hydraulic baler must be flat,compact and hard,and its metal base plate must be flat without any deformation.When the ground is soft,a sweeping rod or pad must be used to increase the force surface and increase stability.


    3.All hydraulic balers must be installed in accordance with relevant standards and regulations(the hydraulic balers must be horizontal and vertical,and the span and spacing must meet the requirements of the specifications).No matter what height the hydraulic baler is set up,instability is not allowed.
    4.The springboard on the hydraulic baler must be neatly laid,and the width and length should be consistent (except for special parts).The springboard on any hydraulic baler must be fixed firmly,and there must be no large holes on the platform(except for special parts).
    If you have any questions,please call Nick Company:86-29-86031588 or visit us : www.nkbaler.net 
    2020-11-09
    Share:
  • The maintenance and lubrication of hydraulic baler must be done regularly.First of all,pay attention to keep the hydraulic baler dry,do not let it rain,or put water on it.
    Secondly,we must do the following:
    1.Remove the debris or stolen goods from the hydraulic baler once a week

    2.Clean,maintain,and lubricate the upper slide once a month,and add a drop of appropriate lubricant to all connecting shafts once a week.


    3.Do not add too much every time you add oil to avoid malfunction of the micro switch due to oil immersion.

    Nick hydraulic baler is your best choice for automatic bundling,fast speed,simple structure,simple action,low failure rate and easy cleaning and maintenance.

    Nick Baler website:www.nkbaler.net,or call:86-29-86031588



    2020-11-09
    Share:
  • According to the purpose of the shearing machine,the shearing machine can be divided into two categories:head shearing machine and cut-to-length shearing machine.
    The characteristic of the shearing machine is that it can shear the moving rolling piece horizontally,and it has three basic requirements:

    1.The shear blade should move with the moving piece when cutting the rolling piece,that is,the shear blade should complete both cutting and moving at the same time,and the instantaneous speed of the shear blade in the moving direction of the piece should be the same as that of the rolling piece.The moving speed of the pieces is equal or greater than 2% to 3%.


    2.According to different product varieties and specifications and user requirements,the same shearing machine should be able to cut multiple specifications to length,and make the length tolerance and the quality of the cut section meet the relevant national regulations;
    3.It can meet the requirements of rolling mill or unit productivity.
    According to the actual needs of everyone,the Nick brand shearing machine has been recognized by many customers with high-quality qualifications and professional craftsmanship and is trustworthy.
    Web:www.nkbaler.net,Tel:86-29-86031588
    2020-11-07
    Share:
  • Cotton processing is the continuation of cotton production (cotton industry) and an indispensable transition between the cotton industry and the textile industry.The cotton processing factory is the link and bridge between agricultural production and farmers.
    The purpose of cotton processing is to separate fibers and cotton seeds to produce lint,linters,cotton seeds,stick oil and by-products,so that they have use value.

    In the cotton processing process,it removes impurities,reduces water content,improves quality,reduces volume,and uses a cotton hydraulic baler to make bales.Make it easy to store,keep and transport.


    This kind of labor process in which machines are used to change the shape and shape of the original cotton product through a certain method of labor,increase its value,or make it into another new product,is called cotton processing.
    It can be seen that cotton processing enterprises are productive enterprises that conduct preliminary processing of seed cotton.Among them,the most indispensable equipment is the cotton baler.

    Nick brand cotton baler is safe and reliable,low power consumption,economical and reasonable,easy to use,simple to maintain and operate.It is a good helper for your production

    Web:www.nkbaler.net,Tel:86-29-86031588

    2020-11-06
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL: 86-29-86031588
Fax: 86-29-86031588 Sitemap
Add: East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com Nickbaler888@gmail.com WhatsApp: 008615021631102  
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top