It is specially used for the compact packaging of waste paper, waste cardboard, leftovers from carton factories, plastic film, straw and other loose objects.
1. The photoelectric switch automatically detects whether the material can be filled up and completes the automatic function
2. The reasonable double scissor blade design of the horizontal baler improves the paper cutting efficiency and prolongs the service life of the blade
3. The common anti-skid design of the horizontal baler prevents the appearance of trapezoidal bags and makes the bales more beautiful
4. The main oil cylinder adopts the design of turret bracket and spherical end surface, which can eliminate the torque acting on the main shaft and significantly extend the life of the oil seal

5. The horizontal balers are equipped with a common tying line installation, thereby reducing the fault rate and facilitating cleaning, maintenance and maintenance

6. The horizontal packing machine adopts differential technology to make the packing speed faster, thereby improving work efficiency and saving power
7. Floating necking in four directions at the machine outlet, so as to automatically distribute the pressure on all sides, which can be universally used for the compaction of various materials
8. The horizontal packing machine can freely set the packing length, accurately record the packing value, and use it as an operator
9. Automatic fault diagnosis, automatic display, improve detection efficiency
10. Internationally standardized circuit layout, graphical operation instructions, and detailed component markings make it easy for operators to understand and improve maintenance efficiency
11. No need for special ground equipment, making the installation simple and easy
Shaanxi Nick Machinery Equipment Co., Ltd. is committed to the production of waste paper balers. The semi-automatic waste paper balers and automatic waste paper balers produced are of high quality and low price. If you need it, please log on to our website: www.nkbaler. com

2021-03-31

Straw baler occupies an important position in animal husbandry and can produce green storage forage in the animal husbandry industry. It is a new type of equipment that cannot be replaced by animal husbandry and agriculture.
1. Small size and large capacity. Generally, bulk grass and straw have a bulk density of 20-50 kilograms per cubic meter, and the bulk density of compressed into a block is 800-1000 kilograms per cubic meter. The large density and small volume make it very easy to store And transportation, and will not spontaneously combust when stored in high density. In the open air, the storage period is 2-3 years or longer.
2. Straw packaged feed, cattle, sheep and other livestock have good palatability, and the feed has a unique strong sour fragrance, which has a good attractant effect. It can reduce metabolic diseases and benefit the intestinal health of livestock.
3. Good nutrient content, high digestion and absorption rate. Generally, the crude protein of briquetted feed can reach more than 6%. The feed intake rate can reach 100%, and the digestion and absorption rate of livestock can reach more than 70%.
4. The use of straw baler can effectively improve the utilization rate of feed and save the feeding cost of farmers.

5. Convenient feeding of cattle and sheep. Briquette feed can be fed both wet and dry, saving labor, labor, time, and mechanized feeding.

6. Reduce pollution. The comprehensive utilization of straws realizes the sustainable development of modern agriculture, and also reduces the use and pollution of organic fertilizers in the breeding industry, and also increases the income of the planting industry.
The innovation of animal husbandry is an eternal topic of economic development. Only innovation can enable enterprises to win in the fierce market competition. In such competition, it is reflected in the advanced level of equipment. Today's animal husbandry industry has begun to gradually use in large quantities. The straw baler is now available. Nick's high-end technology makes the straw baler more adaptable to the development of the times and provide you with better services.To learn more about the straw baler, please follow our website www.nkbaler.com.

2021-03-31

The cross-section of the bale packaged by the round metal baler is circular, which is mainly to adapt to the furnace mouth of the smelting furnace, facilitate filling, and increase the furnace entering speed, so as to achieve the effect of energy saving and high efficiency. Generally suitable for use in the scrap metal recycling industry. The operation is simple and convenient, and the package is automatically turned forward to save the packaging time.

The round metal baler is mainly used for scrap metal processing in the recycling of scrap metal. It is generally used to pack stainless steel scraps, iron scraps, steel scraps and other long and bulk materials, and packs and compresses various scrap metals into a large density. Small in size, the cross-section is circular, and the length of the bale is generally 400-600 mm. The main advantage of the circular bale is that it is convenient to enter the furnace for smelting. The smelting furnace mouth is generally round with a diameter of about 400 It ranges from millimeters to 700 millimeters. If the cross-section of the bale is square, during the filling process, the surrounding of the bale is right-angled, which is easy to get stuck in the furnace mouth or furnace mouth, and manual intervention is required, which is not conducive to the smelting operation. The round bales directly enter the furnace mouth without manual intervention, and fall into the furnace automatically, saving filling time and saving a lot of energy. Long-term planning can save a lot of electricity and labor costs. Nick Machinery can also customize the machine according to your requirements. Please contact Nick Machinery first to inform the specific packaging requirements. We will recommend the best solution to you according to your specific requirements. www.nkbaler.com

2021-03-29

The process of ecological civilization construction is accelerating. As an effective mechanical equipment for waste straw treatment, the straw baler greatly reduces the undesirable phenomenon of straw burning, making the waste straw turn into a treasure and become a precious resource, which is recycled. To achieve the effect of killing two birds with one stone. The straw baler equipment brings us not only the improvement of production efficiency, but also a lot of social benefits to us, protects the home we depend on for survival, and makes our living environment better and better.

Sustainable development is the direction we pursue. With the ultimate goal of improving resource utilization, reducing waste emissions, cleaner production and recycling, we will build a horizontally coupled and vertical closed cycle with environmentally friendly and energy-saving straw baler equipment as the core. Economic industry cluster. The straw baler just came into being. Reasonable recycling of resources. It is safe and reliable. At present, the market potential of the straw baler industry is infinite. We are waiting for us to explore and discover more mysteries! The straw balers produced by Nick Machinery are all reliable, low power consumption, economical and reasonable, convenient to use, and simple to maintain and operate. They are a good helper for your production. For details, please contact us 86-29-86031588

2021-03-29

Due to the continuous development of my country's modern industrial level, the demand for semi-automatic waste paper balers is increasing. Our waste paper baler manufacturers should design and produce waste paper baler products that meet the needs of the public according to the needs of many users. Only in this way can we gain a firm foothold in the baler industry, let's analyze the use and requirements of waste paper baler!
The purpose of the waste paper baler is actually to compress and pack loose waste paper, waste paper boxes, waste plastics, straw and other waste products, so that it can greatly reduce the volume, and is more convenient for storage and transportation, which can save the company's storage Space, reduce transportation costs and bring economic benefits to enterprises. The waste products after packaging have the following advantages:
1. The volume is greatly reduced, the storage space is reduced, and the storage is convenient.
2. It is more convenient to achieve fire prevention, moisture prevention and pollution prevention, which is conducive to environmental protection!
3. Reduce transportation costs and improve economic efficiency.
4. Sustainable development strategy conducive to resources! Requirements for waste paper baler:

First of all, we must ensure the basic working performance of the waste paper baler, and can carry out the Baler Press production activities normally.

Second, it can improve the efficiency of Baler Press work, so a waste paper Baler Press machine that can improve work efficiency is sure to be welcomed by the majority of users.
Third, safety performance is a very important index for all mechanical products, and safety must be considered in place.
Nick’s waste paper baler series products include: semi-automatic waste paper baler, fully automatic waste paper baler, small vertical waste paper baler, etc. It can also be customized according to customer’s intentions. Nick’s products always have one Suitable for you, you are welcome to inquire 86-29-86031588.

2021-03-29