The waste plastic baler equipment is to constrain some waste materials to the shape of a cuboid or a cube to facilitate better transportation. The equipment is a relatively high-tech product in today’s society. Many of our customers look at the appearance It is simple and easy to understand. In fact, its built-in structure is very complicated. If customers want to make it work for us better, they must understand the built-in waste plastic baler.
There are many ways to classify waste plastic balers. According to the direction of the force, there are two types: vertical and horizontal.
Use horizontal. According to the structure type, the hydraulic press has two-column, four-column, eight-column, welded structure and multi-layer steel belt winding structure, etc., and medium and small vertical hydraulic presses also use C-frame type. The C-frame hydraulic press is opened on three sides, which is easy to operate, but has poor rigidity.

The welding structure hydraulic press used for stamping has good rigidity, which is opened back and forth, but closed left and right. In the vertical four-column casting hydraulic press with upper transmission, the oil cylinder is fixed in the upper beam, the plunger is rigidly connected with the movable beam, and the movable beam is guided by the column and moves up and down under the pressure of the working fluid.

There is a workbench that can move back and forth on the beam. The upper anvil and the lower anvil are respectively installed under the movable beam and on the work table. The working force is received by the structure composed of upper and lower beams and uprights. Large and medium hydraulic forging presses driven by pump-accumulators often use three working cylinders to obtain three-level working force. The working cylinder is also provided with a balance cylinder and a return cylinder that exert upward force. These are just planning the manufacturing principles of hydraulic presses. After thoroughly analyzing these structures, we can have a deeper understanding of hydraulic presses.
Nick brand waste plastic baler has good rigidity, toughness and volatility, beautiful and compact, convenient operation and maintenance, safe and energy-saving, and low investment cost. It can better serve you. For more information, please contact us 86-29-86031588 or visit our homepage www.nkbaler.com

2021-03-24

With the frequent use of modern production enterprises, the continuous improvement of horizontal waste paper baler manufacturers has contributed to the development of the commodity packaging market. In order to meet the requirements of different conditions, horizontal waste paper balermanufacturers are actively exploring the actual needs of the market , And the future development trend of the industry, in order to be able to produce horizontal waste paper baler manufacturers suitable for market demand, and make a huge contribution to the prosperity of the domestic market.

Most of our horizontal waste paper baler manufacturers are imported high-end equipment from abroad, starting late, and the expertise in this area is relatively scarce. Some imported advanced technologies are difficult to digest at a time, and of course it is difficult to create higher value. To a certain extent, horizontal waste paper baler manufacturers are in a dilemma. Most of the equipment in our country is to buy foreign advanced equipment first, and research in your own field. This is just superficially imitating others and it is difficult to surpass others. This also requires us to continuously learn professional knowledge in all aspects. Constantly speeding up the pace of advancement, and only in this way can we achieve better development. Our horizontal waste paper baler manufacturer is one of the famous domestic baler companies, and has a high reputation in the country, and there are also in the market. Has a large market share. The application of horizontal waste paper baler manufacturers in the market has been welcomed by people. It is also the introduction of new technologies in continuous research and development, and continuous adherence to independent innovation. It is under this situation that horizontal waste paper baler manufacturers continue to grow in the market and slowly mature.

Nick Machinery Company supplies waste paper baler, semi-automatic waste paper baler, automatic waste paper baler, pressurized waste paper baler, hydraulic waste paper baler, waste paper baler, quality assurance, first-class service, baler price The price is moderate and cost-effective! Welcome to buy. Our contact information 86-29-86031588

2021-03-24

Straw balers currently cover a wide range of industries, and demand is constantly increasing. The emerging industry of straw balers has quickly occupied the current important machinery industry for straw balers in my country. The horizontal straw balers we produce are automatic The baler is beautiful in appearance, easy to operate and maintain, and has a high safety factor. The straw baler has good rigidity and stability, and has been widely used in straw baler factories, waste recycling companies and other enterprises.
The Baling Press categories of straw baler are mainly waste glass bottles, straw baler, waste cloth, waste plastic film, waste foam plastic and wood. Among them, waste cotton and hemp textile Baling Press materials can be used as high-quality paper; wood can be reused according to its quality, even if it is not recycled, because its basic cellulose is easy to rot, decompose and be absorbed by the soil, there is no residue, and it will not give The environment is harmful.

Other Baling Press wastes generally cause harm to the environment. Some of them have good stability and are difficult to decompose in nature, and over time they become the main garbage on the earth. With the rapid development of Baling Press products, the failure to take effective measures in the management, disposal and reuse of waste is also an important reason for this status quo.

Use straw balers to pack our discarded things, especially paper, which can be recycled to save trees. In the hydraulic system of the straw balers, the pressure loss of the flowing liquid has an adverse effect on the power, leakage and performance of the system, but as long as we Full consideration is given to the design and installation of the pipeline, and it can be controlled within a smaller range of values.
Nick has been engaged in the research and production of straw baler equipment for more than ten years, and will continue to issue high-efficiency and easy-to-operate straw baler equipment for customers to use. For more information about straw baler equipment, please pay attention to the Nick website www.nkbaler.com, phone 86-29-86031588

2021-03-24

Many times when we use a hydraulic baler, we will find that the adhesiveness of the hydraulic baler that we just bought is obviously better than the adhesiveness of the hydraulic baler after a period of use, so for this kind of use for a long time or use it How should the adhesiveness of the hydraulic baler after a period of time be improved? Next, I will introduce a few ways to improve adhesion.
1. Check whether the temperature adjustment rotary button is not suitable. It is recommended not to adjust too much. Generally speaking, between 4 and 5 of the scale line can meet the requirements.
2. Check if it is a heater problem. If there is a problem with the heater, you can solve the problem according to the instructions on the hydraulic baler equipment. If you can't solve the problem yourself, you can also call the supplier and let a professional guide us through it.
3. Check whether the power supply voltage is normal. If it is not normal, this situation may also occur. Check whether the voltage is the voltage that the machine should use, generally 220 volts.

4. The middle cutter spring of the Baler is fatigued. This is one of the common reasons. Users should learn to judge for themselves whether this is the case. If this is the case, it is necessary to suspend the Baler device for a while, or directly replace the spring.

5. Check whether the position of the ironing head of the equipment is wrong, and manually adjust its correct position. Generally speaking, it needs to be adjusted according to the actual needs of customers.
The above are the methods of how to improve the adhesiveness of hydraulic baler introduced by our Nick Machinery. You can refer to this problem during use. If you encounter other problems, you can contact 86-29-86031588, and there will be professionals to answer you.

2021-03-24

"The purpose of garbage sorting is to increase the proportion of solid waste that can be recycled." Because the recycling of renewable resources all over the world is the same kind of recycling, the more single the composition, the better. "For example, newspapers can only be reused to make newspapers, while coated paper can only Recycled into coated paper. The waste paper baler is of great significance for the front-end products to sort the waste!” Despite the difficulties, after several years of persistence, great results have been achieved.
The waste paper baler is of great significance for the front-end products to do a good job of garbage classification
The automation of the waste paper baler is reflected in the entire process of feeding, compression, threading and Baling Press. In production, the operator only needs to press a button to realize automatic processing and processing, and the efficiency is significantly improved. The waste paper baler is a large-scale waste paper processing equipment with a large volume. The width and height of the discharge port are fixed, but the length can be adjusted according to the user's own needs to obtain a more ideal effect size.
The waste paper baler adopts a horizontal structure, with a large import and export size, and a strong production capacity. The processed products can also meet user requirements. The horizontal structure is stable and the equipment runs more smoothly.
70 to 80% of our daily consumption of waste is waste paper. In addition to saving water and electricity, the most important aspect of office energy saving is the recycling of office waste paper. Data shows that for every ton of waste paper recycled, 850 kilograms of paper can be made, 300 kilograms of wood can be saved, and pollution can be reduced by 74% compared to equivalent production. This is more sustainable than driving one day less, and the pain factor is much lower! The waste paper baler has contributed a lot to our environmental protection cause! Nick Machinery produces a complete range of balers and styles. You will not be disappointed. If you are interested in our products, please contact us 86-29-86031588 

2021-03-23