In the development of waste paper baler in recent years, it can promote itself in many ways. It is widely used in light industry, food, foreign trade, and how to solve the problems? General merchandise, printing, waste paper balers cannot be delivered to the pharmaceutical, post and telecommunications, textile and other industries, and can meet the needs of the public.
However, when using the waste paper baler, the belt is offset, so how do we need to check it?
Related to the quality of the belt, we must ensure the straightness, hardness and deflection of the belt. It is related to the friction and resistance where the belt passes.
If the design of the belt bin of the waste paper baler is too small, the strap will be entrained in the bin. If the fixing screws of the belt track are loose and the flap is not flexible, it will also cause the belt feeding problem.

Waste paper baler, so as long as you avoid these problems, you can make the waste paper baler run better.

2021-02-23

Common sense of maintenance of waste paper baler
One, clean up
The waste paper baler should be cleaned with high-pressure gas, and protective glasses should be worn during cleaning to avoid damage to the glasses. Secondly, the high-speed, large-capacity wind generated by the fan can also be used for cleaning.
Remember not to clean the baler with water, because the remaining residue after cleaning will cause the body to rust if soaked in water. Waste paper baler
2. Lubrication of waste paper baler
The area where waste paper baler needs lubrication generally includes two parts: roller chain and wheel bearing.

Generally speaking, every 1000 bales need to be lubricated with engine oil once, but this is easy to absorb dust, so you can choose to lubricate the chains regularly at the end of the season and idle periods, so that the chains are not as easily contaminated as they are running. 

Wheel bearings need to be removed, cleaned and replaced every year. When lubricating the wheel bearing, rotate the wheel at the same time, and the common sense of maintenance will stop when the rotation encounters resistance.

Nick Baler automatic horizontal waste paper Baling Press has good heat dissipation, the oil tank has a small heat dissipation area, the oil tank has a small storage capacity, and the oil circulation is too fast.contact us now.

2021-02-23

How do waste paper baler manufacturers perform after-sales maintenance on waste paper baler
In the after-sales maintenance of waste paper baler manufacturers, the inspection method for after-sales service personnel to eliminate the fault of the waste paper baler is to check whether the faulty parts of the waste paper baler can operate normally, so as to ensure the normal and stable operation of the waste paper baler , Nick's after-sales personnel of waste paper packer manufacturers should try their best to meet the following conditions when diagnosing the fault of the waste paper Baling machine:

1. Failure analysts should have a strong sense of advancement. With the ability to quickly judge, the problem can be found when the fault is in the initial state, and effective measures can be taken to deal with it to avoid minor faults from forming major faults.

2. The accuracy of the conclusions should be ensured. Only by obtaining very accurate data conclusions can the time and energy used to eliminate faults be reduced, and some common faults of waste paper baler can also be prevented early. Therefore, we should go into the fault analysis of the waste paper baler as much as possible.
3. It is to ensure the correct conclusion. If the correct cause of the fault cannot be obtained, the fault cannot be eliminated. Therefore, the correct diagnosis is the basis for the recovery of the waste paper baler.
4. It needs to be fast, time is life, the shutdown of the key waste paper baler equipment will cause the entire baling station, so the staff stops working, and every second must be determined to solve the problem and resume production.
5. It is to ensure that the conclusions are simple and applicable. Because there are more interference factors on the work site, but because sophisticated and complex instruments are not necessarily applicable, and the price is more expensive, we need to adopt a relatively simple and effective way to deal with the waste paper baler The failure problem.
6. The after-sales personnel of waste paper baler manufacturers must have high professional training and troubleshooting capabilities, because the working standards and service attitude of the service personnel directly determine the customer's recognition of the brand.

2021-02-05

1. Strength standard
 Under ideal and stable working conditions, the load acting on the part is the nominal load, and the stress calculated according to this load is called the invalid force. When the machine is running, there are often additional loads acting on the parts, and the load factor K is usually used to consider the effect of the additional load. The product of the nominal load and the load factor is called the calculated load. The stress calculated according to this load is called the calculated stress.

Intensity is the basic calculation criterion to measure the working ability of parts of automatic waste paper baler. In order to make the parts work normally, without fracture, excessive residual deformation and fatigue damage during work, the parts must have sufficient strength. The parts of the automatic waste paper baler must meet the strength conditions.

2. Stiffness standard
Stiffness refers to the ability of a part to resist elastic deformation. Uranium parts, such as machine tool spindles and motor shafts, must be worked properly and have sufficient rigidity.
3. Abrasion resistance standard
After the parts of the automatic waste paper baler are worn and run, the original structure shape and size will be changed, which will reduce the accuracy of the machine, weaken the strength, cause the parts to fail, and seriously cause the automatic waste paper baler to be scrapped. Among the scrapped automatic waste paper baler parts, about 80% are caused by wear. Therefore, in the design of automatic waste paper baler, we always strive to improve the wear resistance of parts and minimize the wear of parts.
4. Vibration stability standard

There are many vibration sources that change over time on the automatic waste paper baler, such as backlash meshing of gears, eccentric rotation of uranium, etc. When the vibration frequency of the fully automatic waste paper baler or parts is similar or equal to the frequency of the periodic interference force, resonance will occur, which is called loss of vibration stability. Resonance not only affects the normal operation of the automatic waste paper baler, but also produces noise, and even causes the destruction of the automatic waste paper baler.

5. Heat resistance standard
When parts work at high temperatures, creep occurs (the stress in the metal is constant, often low stress, but slow and continuous plastic deformation occurs), which will reduce its strength limit, fatigue limit, and destroy normal lubrication conditions.

2021-02-05

Regardless of the performance of the hydraulic waste paper baler, it can be summarized as the strength of the hydraulic waste paper baler's execution ability. The work must ensure the stability of the operation to ensure that the packages are uniform and unified. So what causes the hydraulic waste paper baler to not work quickly?
1. The oil supply pressure of the hydraulic waste paper baler oil pump cannot meet the flow demand. In order to prevent the occurrence of oil leakage, strict inspection and testing are required before work.

2. If the overflow valve in the hydraulic waste paper is deformed, it will seriously affect the main valve core blockage. The main valve core is blocked at the small opening, which will easily cause some of the pressure oil output by the hydraulic waste paper packing machine oil pump to overflow back to the oil tank. The flow of oil in the baler into the actuator is greatly reduced, which slows down the speed of oil supply.

3. The internal and external oil leakage is relatively serious. In rapid work, it is easy to cause the oil supply pressure to be too low, but the pressure is much higher than the oil return oil circuit. When the piston seal of the hydraulic waste paper baler cylinder is damaged, the baler The two sides of the oil cylinder are prone to accidents that cause excessive internal leakage, resulting in insufficient rapid movement of the hydraulic waste paper baler oil cylinder, and other parts are also prone to oil leakage.
4. A series of reasons such as the lubrication of the guide rail and the poor installation accuracy and assembly accuracy of the oil cylinder in the hydraulic waste paper baler can easily increase the friction resistance when the baler is working.

2021-02-05