Nowadays, with the advancement of technology, more and more foams are being recycled, and foam balers have also emerged and become indispensable equipment for waste recycling stations. So, what is the role of foam recycling? Now Nick will introduce the Baler:
Use waste foamed plastic as heat insulation material
With the development of the chemical industry, polystyrene foam has been used as packaging materials, disposable tableware, etc., to the field of building insulation materials with more market prospects. Add a certain amount of low boiling point liquid modifiers, blowing agents, catalysts, stabilizers, etc. to the waste polystyrene foam after defoaming. After heating, the polystyrene beads can be pre-foamed, and then heated in the mold A rigid polystyrene foam board with fine closed pores is prepared. This kind of board can be used alone, or it can be coated with a thin aluminum sheet after forming to make an aluminum-plastic board. Its thermal insulation performance is very good. After the actual use of the roof of the house, there is no frosting and condensation, and the construction cost can be reduced, and the construction operation is convenient. Therefore, in northern heating areas, the polystyrene foam insulation board produced by this method has a wide range of uses and good development prospects.
Use waste foam plastic to prepare waterproof coating

Use suitable modifiers to modify waste foam plastics to prepare water-emulsion waterproof coatings with quick-drying at room temperature and long water resistance. The method is simple in process, and it is also very convenient to adjust the viscosity with water. The waterproof coating can be used for corrugated boxes instead of moisture-proof oil, and can also be used for fiberboard waterproofing.

The foam baler produced by Nick Machinery is simple in structure, stable in action, low in failure rate and easy to clean and maintain. Welcome to visit www.nkbaler.net

2021-08-26

At present, the overall level of my country's straw baler packaging industry is relatively low, most manufacturing enterprises have weak technological development capabilities, and the straw baler technology content is low.
In the development of new products, the industry's overall technical capabilities are insufficient, and the new products developed are often copying equipment from foreign counterparts, and the general mechanical functions are not as good as the originals. In short, new products have no new ideas.
1). The product design quality is not high and the predictability is poor.
The research and development of straw baler products requires designers to have a solid theoretical foundation, rich practical experience, innovative spirit and comprehensive quality. However, only these premises are okay for products that are not highly complex, but not enough for products that are complex and highly automated. When designing packaging machinery products with a complex structure and a high degree of automation, because of the objective premise and the limitation of human's own physiological factors, the design is prone to mistakes, human omissions, and often lack of foresight. Whether the designed product has good processing technology, whether the size of each department is accurate, whether there is no human oversight, how well the assembly is, etc., the experience of the designer is powerless here, but these problems directly affect the quality of the product.
2) The product design and manufacturing cycle is long and cannot respond quickly to the market.
Straw baler packaging machinery companies generally use computer graphics, so that companies get rid of the drawing board, shorten the product design cycle, improve the design quality, but did not fundamentally solve the problem. The current market situation is that the life cycle of products is getting shorter and shorter, and the production form is more and more presenting a single-piece and small-batch format to adapt to the rapid changes in the market. These all pose severe challenges to the traditional design and manufacturing model.
3) The high cost of product design and manufacturing has led to an increase in product costs and lack of market competitiveness.

In order to test the function of the product, the straw baler sometimes needs to do some function tests. Some experiments are destructive and some are expensive. In some cases, it is impossible to test at all. All these bring problems to the design and manufacture of products, and increase additional costs. These additional costs are sometimes very high; the main reason is that the quality of product design is not high, the predictability is poor, and the probability of occurrence of waste is increased, which makes the finished product. The rate is reduced. The cost allocated to each product increases.

Nick Machinery operates in line with the development concept of integrity, quality and after-sales service. It provides every customer with perfect after-sales service, solves any equipment problems for customers in a timely manner, and achieves greater work efficiency for customers. Go to the market www.nkbaler.net

2021-08-26

The replacement of straw balers is changing with the market:
Every era has products or skills that they want to correspond to, such as Baler equipment. The replacement of the baler is very fast. When the equipment was first developed, there will be many differences in the equipment at that time compared to the current one, and there are deficiencies in both skills and planning. When the baler first came out, it was mainly a vertical structure, this kind of equipment has a small workload and a lot of operation. At that time, this vertical baler can now meet the production needs.

The current baler has now undergone many technical follow-ups, and has made continuous progress no matter in terms of planning or production. Nowadays, the main stream equipment in the market is a baler, which can be equipped with different pressures according to production requirements, and the bale size of the bale is adjustable. The weight of each package is large, the package shape is neat and clean, and the density is so on. Save a lot of cost in transportation.

More than ten years of production experience has created the innovation and replacement of Nick Machinery's automatic hydraulic baler technology. Achieved the recognition and consensus of batches of new and old customers.www.nkbaler.net

2021-08-25

The development of the waste paper baler industry is becoming more and more in the direction of automation and intelligence. The intelligent waste paper baler adopts a hydraulic system for transmission, which has obvious functional advantages!
 Next, let our company's technicians analyze the functional advantages of the hydraulically driven waste paper baler for the majority of users!
1. The hydraulic transmission power is stable and the pressure is high:
The hydraulic system of the waste paper baler can continuously and stably generate driving force, and the pressure is increased compared with the pneumatic transmission device, which can effectively realize the operation of low speed and large tonnage, which is a feature that other forms of transmission do not have!
2. Compact structure:
With the same power, the hydraulic system transmission device has a smaller volume and a more compact structure. Compared with the pneumatic transmission device, it has more excellent functions!
3. Good safety function:
The safety protection operation of the small waste paper baler using hydraulic transmission device is relatively easier, and the operating time safety factor is small, which can ensure the personal safety of users!
4. Low noise of hydraulic transmission:

The small waste paper baler uses a hydraulic system transmission device, which can greatly reduce the noise. If the pneumatic transmission system is used, the system operation will produce a lot of noise, especially when the exhaust is exhausted, the noise will be louder!

Nick Machinery believes that only the perfect combination of the performance and quality of the waste paper baler can make the waste paper baler fully play its role in the market and promote the entire waste paper baler industry towards a better development direction.www.nkbaler.net

2021-08-25

When the hydraulic cylinder of the waste paper baler is found to be faulty, if a certain troubleshooting sequence is followed, the efficiency of troubleshooting will be greatly improved. The basic sequence of troubleshooting for the hydraulic cylinder of the hydraulic waste paper baler:
1. Clarify the nature of the failure of the hydraulic cylinder when it is started, such as the movement speed does not meet the requirements; the output force is not appropriate; there is no movement; the movement is unstable; the movement direction is wrong; the action sequence is wrong; crawling, etc. No matter what kind of failure occurs, it can be attributed to some basic problems, such as flow, pressure, direction, orientation, force situation and so on.
2. List the component catalog that may affect the failure. If the cylinder speed is too slow, it can be considered to be caused by insufficient flow. At this time, list the components that affect the flow of the cylinder, and then analyze whether the flow valve is blocked or not smooth; whether the cylinder itself is leaking; whether the pressure control valve has leaked Large-scale, focused inspection and testing, repair or replacement of unsuitable components.
3. If there is no problem with the relevant components and the hydraulic parameters of each oil section are basically normal, then further check the factors of the hydraulic cylinder itself.

Nick Machinery has a professional R&D design and after-sales team. If you encounter any difficult problems during use, you can always contact us www.nkbaler.net.

2021-07-27