1. After the machine is transported to the site, it should be rotated on a flat and hard ground. If the ground is uneven, it should be leveled with skids and cement.
2. Check whether the parts of the machine are complete, and whether the fasteners of each connection part are loose or abnormal. If you find any loose parts, please tighten the loose parts. If there are any abnormalities, please consult the manufacturer in time.
3. Properly ground the machine under the guidance of an electrician. It is advisable to use a 6 square multi-strand soft wire for the grounding wire.
4. Add clean hydraulic oil to the oil tank, with the oil level being 4-5 cm away from the top surface of the oil tank (oil level marking line). Recommended hydraulic oil grades: use 100# in summer in the south and 68# hydraulic oil in winter; use 68# in summer in the north and 32# hydraulic oil in winter.
5. Except as otherwise required in the order contract, the main engine is not equipped with power cords, electrical switches or electrical control boxes. When installing, please configure the power cord by yourself. The capacity of the electrical switch or electric control box should be greater than 1-2 times the rated capacity of the motor.

Here, Nick Machinery reminds you that you must strictly follow the operating instructions to ensure the safe and effective work of the peanut shell baler.

2021-07-01

The new generation of straw silage baler is a medium-sized fully automatic hydraulic baler developed by our factory according to the current market needs. It has made certain contributions to the comprehensive utilization of straws, straws and other straws, the transportation and storage of straws for power generation, and green breeding, and is favored by the majority of users. It is small in size, light in weight, easy to move, easy to operate, high in production efficiency, and labor saving. It is an ideal straw forage storage and packaging machine. It provides convenience for breeding friends and saves costs, and is deeply loved by the majority of farmers.
Horizontal automatic straw baler is an environmental protection equipment that uses hydraulic principles to compress straw and straw into blocks, and automatically completes automatic bagging Press Press of the blocks, which is conducive to the storage, transportation and utilization of straw. The use of a low-noise hydraulic circuit system and a combination of imported and domestic high-quality parts ensure quality and reduce costs. The performance of the whole machine is stable. It is widely used in the agricultural and animal husbandry industry and has played a huge role in the protection of the environment and resources. The straw baler can press silage straw, dried corn stalks, various straw scraps, waste plastic films, etc., for bundling, and automatic bagging Press Press and packaging. In addition, our factory can customize various specifications and styles according to customer requirements.

The straw silage baler produced by Nick Machinery has simple structure, convenient operation, high degree of automation and high output. It is an indispensable equipment for agriculture and animal husbandry.

2021-07-01

All models are hydraulically driven, and manual or PLC automatic control operations can be selected; the discharging methods include turning over, pushing (side pushing and forward pushing) or manual picking up (Baler); no foot screws are required for installation. Where there is no power supply, diesel engines can be used as power; there are ten grades of extrusion force from 10 tons to 400 tons for users to choose, and the production efficiency ranges from 4 tons per hour to 40 tons per hour.
The size of the compression chamber and the size of the bale can be customized according to customer requirements.
Uses of waste paper hydraulic baler:
The waste paper baler is used to squeeze waste paper and similar products under normal conditions and pack them into a special packaging tape to greatly reduce the volume, so as to reduce the transportation volume, save the freight, and increase the benefits for the enterprise. Mainly used for packaging waste paper (cardboard boxes, newsprint, etc.), waste plastics (PET bottles, plastic films, turnover boxes, etc.), straw and other loose materials.

Nick Machinery can also customize the machine according to your requirements. Please contact Nick Machinery to inform the specific packaging requirements first, and we will recommend the best solution to you according to your specific requirements. www.nkbaler.net

2021-06-30

The price of waste plastic bottle packaging equipment. Regarding the waste plastic bottle recycling industry, a waste plastic bottle packaging machine is necessary to improve work efficiency. Then many people want to know the price of waste plastic bottle packaging equipment. Let Nick Simply organize it for everyone
The price of a horizontal baler is about 40,000-250000. Although the horizontal waste plastic bottle baler is larger than the vertical baler, the compression force is larger than the vertical baler, the baling size is large, the baling efficiency is high, and it is easy to operate automatically. Therefore, the price will be more expensive than the vertical baler.
There are many types of waste plastic baler, and the price should be around 100,000 yuan. Each manufacturer's materials and automation levels are different. In 2021, the price of waste plastic bottle balers should not increase. Even if the price increase is not too great, it is about 10,000 yuan.
1. To buy a baler, we must combine the quotations of each baler manufacturer and carefully purchase products that are far below the market price. At the same time, we should understand some simple knowledge, not to pay for false or disorderly bidding phenomenon (some companies falsely report the pressure, capacity and performance of the Baler in order to obtain a price advantage)
2. During the investigation, not only the factory should conduct on-site inspections, but also its production and processing capabilities. Whether the packager is just a tool used by the leather bag company to cheat, check the previous contract status, and then go to his customer to see the usage.

The topic of the price of waste plastic bottle packaging equipment is here. If you want to know about the waste plastic hydraulic packaging machine, you can follow the Nick Machinery website www.nkbaler.net

2021-06-30

The baler uses the force of a hydraulic cylinder to compress various waste materials into regular and compact bales. After the bales are compressed, the operator can further use plastic bands, iron wires, steel wires, etc. to bind the bales to make the bales The block can still maintain a tight and regular form during transportation.
Regular and compact bales can greatly increase the weight of materials stored in the same storage space and increase the weight of the cabinet. The baler is an indispensable machine in the waste recycling and processing industry, reducing transportation and warehousing costs for users' waste management, thereby creating more profits.
The hydraulic baler has a wide range of applications, suitable for waste paper, waste paper boxes, straw, clothing, cotton, textiles, plastic bottles, wood chips, rice husk, peanut shells, cotton fiber, metal, scrap iron, scrap aluminum, scrap copper, waste Metal scraps, woven bags, sponges, tires and other waste items are recycled and compressed for packaging.

Nick Machinery is a manufacturer specializing in the production and sales of hydraulic balers, providing more than 140 types of balers, with many styles and models. Welcome to visit www.nkbaler.net

2021-06-29