WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • The automatic straw baler should pay attention to the reasons of moisture prevention and the appropriate application operation process. There are reasons to avoid the entry of water:
    1. Water corrodes the metal material and polymer materials in the hydraulic drive system software system of the automatic straw baler, reducing the service life of electronic components, and the eroded fine particles fall into the system software and cause damage.
    2. Accelerate the growth of mildew in the oil, and if there are fine particles of iron, copper, manganese, etc., the oxygen in the water and the air will oxidize the oil and air and convert it into a thick polymer, collectively referred to as oil stains. When the application temperature exceeds 65 degrees, the air oxidation rate accelerates, and the chemical effect doubles for every 10 degrees increase.
    3. The wettability of the fully automatic straw baler is reduced. When using the plastic strapping of the fully automatic straw baler, it is not necessary to make the plastic strapping dirty and damaged. If you pay attention to it, it is generally not easy to get dirty, but there is a situation that should be paid attention to. After taking it, forgot to close the door of the storage box of the automatic straw baler, and immediately pressed the function button of the belt delivery, which caused all the plastic Baling Press belts to fall to the ground. Therefore, it is stipulated that the staff must be careful when working in the operation process. The common failures of hydraulic machines are related to the maintenance standards of hydraulic machinery. If the application and maintenance are good, the hydraulic machinery will have a long service life. Taking certain effective measures to improve the normal maintenance of the hydraulic transmission system will benefit the increase in the service life of the hydraulic machinery. The usual maintenance of the lifting hydraulic machinery is to prevent common failures of the hydraulic press of the fully automatic straw baler. The above is the experience summed up by our Nick Machinery. If you encounter other problems during use, you can also contact our after-sales service at 86-29-86031588, and we will serve you wholeheartedly.
    2021-03-22
    Share:
  • Under the market economy system, China's hydraulic baler industry has emerged, most of which are randomly matched by enterprises. Compared with other machinery manufacturing industry, hydraulic baler is a slower developing field, and there are still shortcomings in itself. It is mainly reflected in the following aspects: different companies have different origins (state-owned, group, private enterprises), assets, weapons and equipment, and technical capabilities are too different, and there are high and low footholds. The overall development trend is that there are few high footholds, and most companies imitate on moderately large-scale machinery and equipment. There are several manufacturers in one place, which are reusable, expensive, fierce competition, and insufficient profits.
    Today, my country's automatic hydraulic baler not only has to be developed in China, but the products produced in our country are already relatively good, so everyone should gradually expand overseas sales markets. In this way, I gradually develop and grow my own business. Nowadays, no matter what you buy, you must pay attention to the brand. Therefore, now the hydraulic baler should follow the brand strategy. Companies that adhere to the "quality-oriented" first have the foundation to create a famous brand, and continue to be innovative and high-tech in the market competition. Application and exploration of cutting-edge processing technology, build brand hydraulic baler, go to the world, face the world! We at Nick Machinery adhere to the "customer-centered" service concept and take quality as the basis to make high-quality, cost-effective high-quality machines. If you need it, you can go to our homepage www.nkbaler.com to learn more. Welcome your visit.
    2021-03-22
    Share:
  • 1. Because the waste paper baler uses a large amount of electricity, the output power of the switching power supply must exceed the standard output power of the heat shrink Baling Press machine, otherwise it is very easy to damage the circuit or electrical components.
    2. When the working standard voltage of the waste paper baler is specified as a three-phase 380V switching power supply, the neutral line, which is the standard three-phase four-wire, should be entered as much as possible; otherwise, the machinery and equipment will not work properly, and the internal electrical equipment prefabricated components will be very easy destruction.
    3. When the waste paper baler is continuously used for a long time, the high temperature resistant power line in the shrinking room should be regularly maintained and disassembled according to the aging level.
    4. After Baling Press, first turn off the main switch of the heating power supply, let the transport motor and fan motor operate again for about ten minutes, and then turn off all the switching power supplies.
    Nick Machinery Factory mainly produces waste paper baler, straw baler, metal baler and so on. Serving customers is the highest reason for the existence of Nickel Machinery, and customer demand is the driving force behind the development of Nickel Machinery. You can go to www.nkbaler.com to learn more. Welcome everyone to visit!

    2021-03-22
    Share:
  • Waste paper balers have brought great convenience to people’s lives. Large-scale equipment like this requires regular maintenance and the selection of some related components, such as the use of hydraulic oil for waste paper balers. Let’s talk about it below. Have a chat.
    First of all, you need to observe the appearance of the oil. The appearance and color of different types of oil will be different. If the oil is lighter, it means that it is light distillate and highly refined oil; if the oil is darker, it means this oil. Most of the products are residual oil residue, low refining degree, or heavy distillate.
    Secondly, you can pour the oil into a transparent glass bottle and shake it to observe its thickness. At the same time, look at the phenomenon of the oil film hanging on the bottle and the rate of bubble generation and disappearance, so that different grades of oil can be distinguished. Oil with low viscosity produces a lot of bubbles, rises quickly and disappears quickly, and has less oil film; oil with high viscosity produces less bubbles, rises slowly and disappears slowly, and has a lot of oil film hangs.
    The smell of each oil is different, such as gasoline, kerosene, diesel, alcohol, and so on. If the oil smells a bit sour, it means that it contains additives; if the oil smells of alcohol, then alcohol must be added.
    The choice of hydraulic oil for the waste paper baler directly affects the convenience, control performance and low failure rate of the waste paper baler control system. It also determines the operating efficiency of the waste paper baler, the failure rate and the service life of the cylinder. Therefore, in order to ensure the production of waste paper baler, we must use high-quality and authentic waste paper baler hydraulic oil.
    If you want to know more, please contact us 86-29-86031588 or log in to our website www.nkbaler.com, we will serve you wholeheartedly.
    2021-03-22
    Share:
  • With the gradual improvement of my country's environmental protection awareness, people also have an understanding of waste paper hydraulic balers. Nick waste paper balers are divided into automatic waste paper balers and semi-automatic
    waste paper balers according to their functions. Today we will talk about automatic balers. They are widely used in various waste paper factories and old waste recycling. Companies and other companies are suitable for packaging and 
    recycling old waste paper, plastic straws, etc. Next, let us understand the characteristics and principles of the waste paper hydraulic baler.
    feature:
    1. The photoelectric switch automatically detects whether the material is full and realizes the fully automatic function.
    2. Fully automatic compression and unmanned operation, where there are many quad-core materials, after the items are compressed and bundled, it is easy to store and stack and reduce transportation costs.
    3. Simple structure, stable action, low failure rate and easy to clean and maintain.
    4. The length of the package can be set freely, and the package value can be accurately recorded, which is convenient for the operator.
    5. International standard circuit layout, graphical operation instructions and detailed component markings make it easy for operators to understand and improve maintenance efficiency.

    Nick Machinery Equipment Co., Ltd. has been committed to the research, development and manufacturing of waste paper balers, hydraulic balers, plastic bottle balers, straw balers, and metal briquetting machines for many years, and has perfect after-sales service. We are willing to seek common development and create the future together with colleagues from all walks of life! Warmly welcome new and old friends at home and abroad to call 86-29-86031588 or log in to our website www.nkbaler.com
    2021-03-18
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
WhatsApp:008615021631102 
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top