Insufficient pressure of
the small waste paper baler will cause the type of waste paper to be punched out is not very neat, and the density will not reach. During our handling and transportation, it is easy to cause loose bags. Nick's analysis: The main reasons for the low pressure of
the hydraulic waste paper baler are as follows:
1. Check whether there is no abnormal sound when the oil pump is operating at high pressure. If there is abnormal sound, there is a problem with the oil pump; confirm the suction and discharge ports of the pump, and fill the pump with hydraulic oil before starting the hydraulic pump. The oil inlet and outlet of the hydraulic pump of
the small waste paper baler should be well sealed and must not leak or enter the air. If it is confirmed whether there is air entering, you can apply butter to the sealing part to see if the noise of the pump is significantly reduced to determine whether there is air entering the pump during operation.
2. Adjust the pressure of the relief valve (pay attention to whether the oil gauge has changed, do not overpressure),
3. Check whether there is oil leakage in the hydraulic system when the machine is working and pressing.
4. Check whether the quality of the oil is qualified, whether there is pollution, the oil filter is blocked, the liquid flow channel is too small, and the viscosity of the oil is too high, so that the oil cannot be absorbed.
5. Check whether the motor power of the waste paper baler is insufficient and whether the speed is too low.
NICKBALER reminds you that in the process of using
the waste paper baler, you must strictly follow the product instructions and do not ignore some small details to ensure safe and effective production. If you have any other questions, you can go to the NICKBALER Company website to learn https://www.nickbaler.net