1. The baler should be well fixed during installation: because the machine is running fast, uneven ground may cause the machine in vibration to shake, causing hidden dangers to the operator. Therefore, keep the ground level and install the machine according to the instructions to keep the machine stable. When the machine is running, it is prohibited to touch the moving parts of the machine with your hands. 

2. Electrical power to the machine: ground the machine power to avoid electric shock caused by improper operation. There must be an automatic shutdown device for the power supply, so that the machine can automatically stop when there is an electricity problem to avoid electric shock and other conditions. 
3. Cleaning of the machine: Because the baler often compresses waste products, etc., it will be blocked by debris after a long time. Sometimes it will cause the machine to run poorly, cause damage to the machine, and reduce the service life of the machine. The machine should be cleaned regularly, and lubricating oil should be regularly applied to the parts that need lubricating oil. 
4. The operator of the machine should do a good job of protection, such as wearing gloves, and prohibiting the head and hands from reaching the inside of the machine. Non-machine operators should keep a distance from the machine as much as possible to prevent damage caused by material splashing.

Warning note: All products are tested before leaving the factory. Customers are requested to add hydraulic oil before connecting to the power supply after receiving the goods to prevent damage to the hydraulic pump due to dry grinding. 1. The pressure of this product has been adjusted when it leaves the factory, and the booster screw of the reversing valve and overflow valve has been lead-sealed, (or the locking back nut is locked) during use, it is not allowed to remove the lead seal or loosen the back nut for pressure To prevent damage to the mechanical parts caused by excessive pressure adjustment and affect normal use.

At present, the baler market is mixed, and many manufacturers or distributors report parameters indiscriminately. If something goes wrong, regardless of the after-sales service, they blindly reduce the quality and lower the sales price. As a result, the customer suffers heavy losses and is unreasonable. In response to market chaos, we promise to be a conscientious enterprise! Ask customers carefully during sales, and be sure to provide customers with suitable models; solve problems in time after sales; make products and character with one heart and soul, and resolutely refrain from price wars! for more information ,please visit :www.nkbaler.net

2020-07-28

1. This product is used for packaging Industrial waste. The operator must follow the operation regulations.
2. The hydraulic oil must be added to the specified oil level line before use (46# hydraulic oil).
3. Before starting the hydraulic pump, check the circuit for wrong connection or leakage.
4. The surrounding area of the hydraulic turn-up plate should be cleaned up every turn-up time to prevent jamming.
5. When packing, the operator must pay attention to safety, spread the paper evenly, and place the paper in place, and close the lid of the box before packing.

6. The hydraulic operating handle should be quickly pushed to the specified position when packing, in case the hydraulic operating handle should be quickly pushed to the specified position when the valve is packed, the hydraulic operating handle should be quickly pushed to the specified position when packing, and the hydraulic oil flow is not enough, causing the motor to overrun The flow causes the motor to overcurrent. Blockage and insufficient hydraulic oil flow cause motor overcurrent.

7. After packing, all hydraulic rods must be retracted into the hydraulic cylinder to prevent dust from damaging the sealing ring and oil leakage.
8. Regularly perform maintenance work and find a mechanic to deal with any leakage in the oil pipe immediately.
9. If an abnormality is found, the operation should be stopped immediately and the cause can be eliminated.
10. After the lid door is opened, it is strictly prohibited to press the door to prevent accidents.
11. Oil pressure: It is strictly forbidden to adjust the pressure without authorization. The operator must work under the adjusted oil pressure. The maximum pressure limit is 30MPa. ?
12. The oil in the oil tank must be strictly filtered and always maintain a sufficient amount of oil. The oil tank should be cleaned and replaced every six months.
13. The lubricating parts of the machine should be filled with lubricating oil at least once a day as required, and the debris in the chamber should be cleaned once per shift.

14. Those who do not understand the main machine structure, performance and operation regulations shall not start the machine without permission. When multiple people operate at the same time, the division of labor should be clear to avoid the danger of misoperation.

15. The machine should stop immediately when there is a serious oil leak or an abnormal phenomenon occurs during work. Don't look at the place where the oil is sprayed, don't directly use your hands to plug it, and don't force it to operate with disease.
16. When the machine is running or packing, it is not allowed to repair or touch the moving parts by hand, and it is strictly forbidden to press the materials in the bin with hands or feet.
17. When adjusting pumps, valves, and pressure gauges, an experienced technician must carry out. If a pressure gauge is found to be defective, it should be repaired or replaced immediately.
18. This machine uses 46# anti-wear oil. Always pay attention to the oil temperature. Stop it when it exceeds 75°C.

19. When turning over the package, after the handle of the cover cylinder is pulled to the return position, push the turning over handle.

www.nickbaler.net or www.nkbaler.com .even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time

2020-07-20

The Industrial waste baler is a packaging machinery used to compress Industrial waste items. Used by various Industrial waste factories, old recycling companies and other units and enterprises to compress a variety of recyclable fluffy waste products such as domestic waste, industrial waste, plastic, film, pasture, straw, cotton, iron filings, aluminum filings, and scrap Bale.

The safety of Industrial waste Baling Press Machines is something that everyone of us operating Industrial waste Baling Press Machines must pay attention to.
On the topic of security, we must always pay attention to it, otherwise the loss will be heavy.
Of course, it is no exception when using a Industrial waste baler. Keep in mind: safety first
So, how to use the Industrial waste Baling Press Machine safely and correctly?
When using the Industrial waste Baling Press Machine, you must remember that you must not put your hands directly on the heating sheet of the Industrial waste Baling Press Machine. That is absolutely impossible.
Because the temperature is sometimes difficult to figure out, so as to avoid burns.
Don't change the components of the Industrial waste baler casually, in order to prevent the Industrial waste baler from malfunctioning.
Nor can it be rinsed with water, because the Industrial waste Baling Press Machine is connected to the power supply. If there is water that is not dried, it will be conductive and very dangerous.
When using it, make sure that the machine is connected to the power source again, and don't connect the wrong power source to cause a failure.

The continuous innovation and development of the automatic Industrial waste balers have produced suitable automatic Industrial waste balers with different characteristics for major manufacturers.
With the vigorous advocacy of innovation in my country, the technology of automatic Industrial waste baler is also constantly injected with fresh blood,
This has also enabled the automatic Industrial waste baler to gradually gain experience in the development and become a well-known brand in the fully automatic Industrial waste baler industry. As far as paper baler is concerned: internal performance is more important than external appearance. Hope the majority of Industrial waste baler manufacturers can take note of this.

2020-07-20

According to our current environmental protection awareness, the Industrial waste and living bags in our lives can be reused in the Industrial waste hydraulic baler we developed, and it is increasingly accepted by everyone. Domestic Industrial waste hydraulic baler has been constantly innovating, but some people do not know its safe operation. The safe operation rules and procedures of Industrial waste hydraulic baler must be known!

The integration process of the international market is accelerating, the technical content of the Industrial waste baler industry continues to improve, and the replacement of new and old Industrial waste balers is accelerating. In the face of increasingly fierce market competition, more and more companies are feeling unprecedented pressure. In order to enhance the competitiveness of enterprises in the Industrial waste baler market, more and more operators are striving to tap the long-term development potential of enterprises, and establishing and organizing the implementation of adaptive technology as a corporate quality strategy has become a top priority for these enterprises.

The Industrial waste baler economy in the 21st century will be based on technology, and the information and knowledge revolution will be a bridge to this economic form. The top management of the enterprise should use this as the basic starting point to design the quality strategy.

In a highly competitive market, in addition to technology, reputation is also needed as an intangible quality factor of Industrial waste baler, which accumulates in the company's brand. The determinants of achieving business success must rely on appropriate personnel and corporate culture. Therefore, in continuous business activities centered on customer satisfaction, it is necessary to expand in aspects such as technological innovation, brand orientation and cultivation of corporate culture.For more information ,please visit : www.nickbaler.net or www.nkbaler.com 
even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time

2020-07-20

Washing method of waste paper baler oil pump. When the entire equipment is completed, it may be a long time to change the hydraulic oil. A cleaning process of the hydraulic system is required. The hydraulic system cleaning of the semi-automatic hydraulic baler mainly has the following aspects:

1. Organize the environment.
2. Use special low-viscosity cleaning oil. When cleaning, add the oil to the oil tank of the hydraulic baler and heat to 50-80 degrees Celsius.
3. Start the hydraulic pump and let it work empty. During the cleaning process, the pipe is often lightly tapped, so that it can receive the effect of removing the attachments, clean the pollution of the oil filter for 20 minutes, and clean the filter, and then clean again, so repeat until the filter is free Many pollutants stopped.
4. For the messy hydraulic system, each area can be cleaned according to the operation area. The hydraulic cylinder can also be connected to allow the hydraulic cylinder to reciprocate for system cleaning.

5. After cleaning, the cleaning oil must be drained as much as possible, and the inside of the oil tank must be cleaned. Then remove the temporary cleaning line, restore the hydraulic baler system to normal operating conditions, and participate in regular hydraulic oil.

2020-07-11