The application of the mineral water bottle packing machine is more and more extensive, and there are more and more production enterprises using the mineral water bottle packing machine. In the process of using the mineral water bottle packing machine, many enterprises will encounter various problems. For inexperienced customers, it is a bit confusing, and I do not know how to start to check the fault. Next, the editor will give you an analysis of the scope and common problems of the mineral water bottle packing machine.
The mineral water bottle packing machine is a packing machine used for compressing mineral water bottle items. It is used by various types of mineral water bottle factories, old waste recycling companies and other units for the compression of various recyclable fluffy waste products such as domestic waste, industrial waste, plastic, film, pasture, straw, cotton, iron scrap, aluminum scrap, and scrap. Bale. The baler can double the volume of waste products and increase the density of items to make it easier to transport and store. It is one of the important equipment in the recycling of waste items.

When starting the mineral water bottle packing machine, first check whether there is foreign matter in the extension of the mineral water bottle packing machine, and then check whether the screws are loose, which will affect the normal transportation of the packaging belt. Make sure to strictly control the gap of the back tape, usually between half a centimeter and one centimeter. Check whether the bearing of the conveyor baler is damaged, and the incorrect position of the crossbar can also cause rare withdrawal problems.
The principle for the manufacturer to select the hydraulic pump is: according to the working conditions, power level and system performance requirements of the main body of the mineral water bottle baler, first determine the type of hydraulic pump, and then determine its specifications according to the required pressure and flow.

Generally, for light load and low power hydraulic equipment, gear pumps and double-acting vane pumps can be selected. For small mineral water bottle baler machines, double-acting vane pumps and rod pumps can be used. For fast-feeding and slow-feeding mechanical equipment (horizontal mineral water bottle baler), manufacturers can use variable-pressure variable vane pumps and double vane pumps. The plunger pump can be used for the equipment with large load and power (mineral water bottle packing machine); the auxiliary equipment of mechanical equipment, such as feeding, clamping and other unimportant occasions, can choose the low-cost gear pump.

2020-06-10

What method can be used to check whether the equipment is normal before the production of the mineral water bottle packer? How should we operate it? Now to explain to you in detail:
  1. No-load test machine

   Connect the power supply of the mineral water bottle baler, loosen the system overflow valve, make the system overflow, start the motor (using the method of stopping immediately after starting), and observe whether the motor rotation is consistent with the oil pump sign rotation. Start the motor and observe whether the oil pump is stable and reliable during operation. Whether there is significant noise in the pump, if not, you can start the test work. Gradually adjust the overflow valve handle of the mineral water bottle baler to make the pressure value around 8Mpa. Operate in accordance with the operation sequence, perform a single action on each oil cylinder, observe whether it runs smoothly without vibration, and gradually adjust the main pressure cylinder and side pressure cylinder Parallelize the bottom plate and the side frame, fix the main pressure cylinder and the side pressure cylinder, and support the rear of the cylinder with the adjustment support.

2. Load test machine
  (1) The load test can be carried out after the operation of the single cylinder is familiar.
  (2) Adjust the pressure of the mineral water bottle packing machine system so that the pressure is about 20~26.5Mpa, tighten and tighten the nut. Do several packaging sequences in order of operation. Add material to the compression chamber. The load test is in the form of physical packaging. Suppress 1 to 2 bags and hold the pressure for 3 to 5 seconds after the stroke of each mineral water bottle packer cylinder is in place. Perform a pressure test on the system and observe if there is any infiltration Oil leakage, if any, should be eliminated after the system is relieved of pressure.

    Only by checking clearly the items to be checked before production, can we better guarantee the smooth production of the follow-up and better create benefits for us.

Nick Baler can supply many kinds of baler machine,Waste paper baler machine,Cardboard Paper Baling Machine，For more information ,please visit : www.nickbaler.net or www.nkbaler.com .even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time

2020-06-10

Waste paper Baling Machine manufacturers also have standards for the selection of their hydraulic components, especially the central hydraulic components of hydraulic stations have higher requirements. For example, the hydraulic motors and oil pumps in their centers have higher requirements. The motors used by Siemens are still domestically produced. Brand?

The oil pump is produced in Taiwan and is still a domestic first-line product that affects all of its hydraulic stations, and hydraulic solenoid valves must be used in Taiwan. The fundamental demand for hydraulic control components:

1. First of all, the hydraulic components are active and reliable, with reliable operation, low impact and vibration during operation, and long service life.

2. When the oil passes through the hydraulic valve, the internal pressure leakage is small.
3. Good sealing performance, less internal leakage, no external leakage.
4. The layout is simple and compact, easy to install and use.
5. Easy installation, adjustment and maintenance, good versatility. Finally, it must be suitable for the needs of customers. The oil pump is produced in Taiwan and is still a domestic first-line product that affects all of its hydraulic stations, and hydraulic solenoid valves must be used in Taiwan. The fundamental demand for hydraulic control components:
1. First of all, the hydraulic components are active and reliable, with reliable operation, low impact and vibration during operation, and long service life.
2. When the oil passes through the hydraulic valve, the internal pressure leakage is small.
3. Good sealing performance, less internal leakage, no external leakage.
4. The layout is simple and compact, easy to install and use.

5. Easy installation, adjustment and maintenance, good versatility. Finally, it must be suitable for the needs of customers.

Shaanxi Nick machinery equipment can supply many kinds of baler machine 
Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . 
For more information ,please visit : www.nickbaler.net or www.nkbaler.com 
even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-06-07

What are the wear phenomena of horizontal baler?

Horizontal baler machines are the same as other machines and equipment, and some bad phenomena will occur. Wear is a common type. There are two types of wear of the baler, one is adhesive wear, and the other is normal wear. Do you know their causes and specific performance? Will be introduced below.

The so-called adhesive wear is the phenomenon that the material of the contact surface is transferred from one appearance to another at the contact point due to solid-phase welding. When the horizontal baler is welded, the temperature at the actual contact point shows two different conditions, which may or may not be greater than the melting point.

The second is normal wear and tear. The wear that occurs within the prescribed period is attributed to it. At the initial stage of wear, the appearance of the conflict will have a corresponding roughness. In general, the smaller the real contact surface, the faster the wear will be. When the appearance of parts is gradually worn out, the horizontal baler has entered a normal and stable wear stage.

Nick Baler can supply many kinds of baler machine,Waste paper baler machine,For more information ,please visit : www.nickbaler.net or www.nkbaler.com .even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time

2020-06-04

 Introduce the matters needing attention when wearing the waste paper baler.
1. The reel should be fixed tightly. The waste paper baler machine needs to fix the packing tape roll on the packing tape reel before threading it. After fixing, there is a rotating handle on the machine to tightly attach the packing tape to the reel. When screwed into a firm position, there is no room for it, otherwise the packing belt will fall into the gap of the reel during the work process, affecting the normal work.

2. The door of the storage box should be locked. During the threading work, the hatch of the storage box needs to be opened, but when the threading is completed, the operator often forgets to close the door. When the waste paper baler performs the storage work, the packaging belt will rush out of the storage belt Outside the box.

Shaanxi Nick machinery equipment can supply many kinds of baler machine 
Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . 
For more information ,please visit : www.nickbaler.net or www.nkbaler.com 
even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-06-04