The waste paper baler is simple to operate and has complete models. Today, I will teach you some solutions to the failure of the horizontal waste paper baler packaging conveyor belt.

Check whether the machine is working normally except for automatic tape feeding. If there are no malfunctions in other parts, it is likely that there is a problem with the potentiometer. Potentiometer, on the front of the waste paper packer, there are a total of four buttons on the operation panel, from left to right are the powerswitch,potentiometer,reset button,and belt feed button.

The potentiometer of the waste paper baler is a rotary button with a scale marked around it, which is used to control the length of the automatic belt feeding after the packing is completed. If there is more than one tape sending and the automatic sending tape is no problem, it is mostly caused by a potentiometer malfunction.
The debugging method, turn the potentiometer to a small scale, and then fine-tune, the machine can feed the tape normally within a range. If the tape feeding is normal in a certain section of the waste paper baler, it is certain that the potentiometer is faulty.
The next step is to replace the potentiometer. It is recommended to use a precise control potentiometer.
The Nick brand waste paper baler is simple to operate and automatically discharges the bale, which improves work efficiency. The installation of emergency stop settings makes the operation safer and perfect after-sales.