Introduce the matters needing attention when wearing the waste paper baler.
1. The reel should be fixed tightly. The waste paper baler machine needs to fix the packing tape roll on the packing tape reel before threading it. After fixing, there is a rotating handle on the machine to tightly attach the packing tape to the reel. When screwed into a firm position, there is no room for it, otherwise the packing belt will fall into the gap of the reel during the work process, affecting the normal work.

2. The door of the storage box should be locked. During the threading work, the hatch of the storage box needs to be opened, but when the threading is completed, the operator often forgets to close the door. When the waste paper baler performs the storage work, the packaging belt will rush out of the storage belt Outside the box.

Shaanxi Nick machinery equipment can supply many kinds of baler machine 
Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . 
For more information ,please visit : www.nickbaler.net or www.nkbaler.com 
even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-06-04

Note that the hydraulic oil pump is installed in the horizontal baler.
In the horizontal baler, when installing the baler and hydraulic oil pump to prevent debris from entering the machine, the perforators are good covers, and the unit is buried between the ground and the feet. Between the foundations, double wedge pads are used for correction. Correct the concentricity of the shaft of the pump shaft and the motor shaft, and make the outer circle of the shaft deviate by 0.1mm.

The gap between the two couplings should be 2-4mm, the gap should be uniform, and the tolerance is 0.3mm. After connecting the pipes and determining the direction of rotation of the motor, insert the firm coupling and check the shaft again. Check the equipment after 2-3 hours of commissioning. If there is no bad phenomenon, it is regarded as a qualified installation.

During the installation of the horizontal baler, the hydraulic oil pump should pay attention to the following points: The installation of the oil pump is very important, which has a very important impact on the smooth operation and service life of the pump. Therefore, the installation and calibration work should be carried out carefully, not in a hurry. The hydraulic pump bracket or base should be stable, and the hydraulic pump shaft and motor should be well aligned.

Nick Baler can supply many kinds of baler machine,Waste paper baler machine,For more information ,please visit : www.nickbaler.net 

2020-06-04

 Note that there must be a ventilation window on the end cover of the hydraulic baler motor!

The hydraulic baler is a precision machine, and small motors are also attracting attention. Therefore, we need to be careful when buying hydraulic baler. The motors used in hydraulic baler include stator and rotor. The stator of the hydraulic baler motor is also called armature, including the machine base, end cover, armature core, armature winding device and other components.

The armature core of the hydraulic baler is installed on the inner ring of the machine base, which is the support of the generator and is made of cast iron. The end cover is installed at the stopper at both ends, the upper lifting ring is hoisted, the lower bottom foot is installed with a round hole bolt, and the base ground bolt is installed with a ground wire. In order to heat and maintain the motor of the hydraulic baler machine, a ventilation window is left on the end cover, and a blind plate is covered on the ventilation window to prevent intrusion of debris.
The rotor includes rotor core, rotor winding, fan, shaft and other components. The rotor core is the through-hole part of the hydraulic baler motor and is made of 1-2m thick steel. The yoke is made of a single piece of low-carbon material and is cladding on uranium through steel.

2020-06-04

 What is the role of analyzing scrap after packaging?
        The baler should be designed and manufactured according to the needs of the user to meet the needs of the public, so as to gain a foothold in the increasingly competitive, the purpose of using the baler is actually mainly to loose paper, waste paper box, waste plastic The waste products are compressed and packaged, which can greatly reduce the volume and facilitate storage and transportation, which can increase the efficiency of the enterprise. The waste after packaging has the following effects:
        1. The volume is greatly reduced, and the storage space is reduced to facilitate storage.
        2. It is convenient to achieve fire prevention, moisture prevention and pollution prevention, which is conducive to environmental protection.
        3. Save transportation costs and increase economic benefits.

        4. Sustainable development strategy conducive to resources.

2020-06-04

Why is the check valve of the automatic waste paper baler machine an important hydraulic component? The manufacturer of the automatic waste paper baler here introduces in detail the important hydraulic components of the automatic waste paper baler-the scope of the one-way valve and the precautions for use, and the specific function of the one-way valve.
       1. Application occasions.

       In the hydraulic system of the automatic waste paper baler, the one-way valve is widely used. It is commonly used in the following occasions: used in the outlet of the hydraulic pump to avoid the backflow of hydraulic oil; used to separate the connection between the oil circuits to avoid the oil circuits Mutual interference; used as back pressure valve; used as bypass valve.

       2. Notes on selection and use:
       When choosing a one-way valve, in addition to reasonable selection of the opening pressure according to needs, it should also be noted that when the flow through the one-way valve is much smaller than the rated flow, the one-way valve sometimes vibrates, the smaller the flow, the more the opening pressure High, the more gas content in the oil, the easier it is to produce vibration.

       Recognize the direction of the inlet and outlet during installation, and do not install the wrong one, so as not to affect the normal operation of the system. It is also important to pay attention to the installation of the check valve at the outlet of the pump. If the inlet and outlet of the check valve are reversed, the hydraulic pump or the motor may be damaged. 

Nick Baler can supply many kinds of baler machine,Waste paper baler machine,For more information ,please visit : www.nickbaler.net or www.nkbaler.com .even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time

2020-06-04