Green storage feed: Straw private chat has the reputation of "grass burger", with balanced nutrition, sour smell and high digestibility. It is a good feed for feeding cattle, sheep and other livestock. The corn stalk baler green storage method is simple and low cost. As long as the straw raw materials are transported back in a short time, the appropriate moisture is controlled, and the fully automatic corn stalk baler is used to seal it after crushing. It can be used without a large amount of input.

There are many advantages of using corn stalk baler to make green silo, including:
1. Using a straw baler can effectively squeeze out the air in the forage to ensure the fermentation effect of the green feed.
2. The corn stalk baler can be used to store fine materials for better shaping. In the production process, labor is saved, the feeding is convenient, and the degree of automation is high.
3. The production and packaging cost of mechanical green storage is low, the sealing is good, the storage time is long, and the phenomenon of secondary fermentation can be effectively avoided, and the long-term green storage quality is high.
Nick brand green storage forage baler is safe and reliable, low power consumption, economical and reasonable, convenient to use, simple to maintain and operate. It is a good helper for your production

2020-08-21

Automatic high-efficiency wood chip hydraulic baler, (also known as wood chip briquetting machine). Using a number of patented technologies, the design structure is ingenious and reasonable. Compared with similar products, the work efficiency is extremely high, reaching more than 65 packages per hour. It is currently the fastest and most automated equipment in China.

Advantages of sawdust hydraulic baler:

1. The machine adopts hydraulic transmission, horizontal and horizontal bagging, fast bag delivery speed and high output.
2. The machine is simple to operate and easy to use. It is equipped with semi-automatic and full-automatic operation modes (convertible) at the same time. It has a high degree of automation and requires less labor. It can use manual feeding or automatic feeding by conveyor.
3. The machine is mainly suitable for the compression of wood chips, rice husks, cottonseed husks, peanut husks and other scraps, and directly bagged after compression, which is convenient for storage and reduces transportation costs.
The unmanned operating system of Nick brand briquetting machine, continuous package delivery, fast speed, easy to use, can better serve you.

2020-08-21

Forage balers are widely used in various industries for the packaging of soft fiber materials and iron filings and thin iron materials, such as cotton fiber, linen, wool, clothing, cloth, towels, waste plastics, wheat straw, paper edges, waste paper boxes, Tobacco, medicinal materials, etc.

The key to forage baler:

1. The raw material must have a certain water content.
2. The raw material must have a certain amount of sugar. For example, corn stalks, sugar cane, pomace, emperor bamboo grass and other gramineous plants can be directly stored without additives.
3. The process of green storage forage baler is fast. Shorten the silage time. Generally, the silage process of small farms should be completed within 3 days.
4. Green storage forage baler has high density and high compaction. During the compaction process of the green storage forage baler, a large amount of air in the material is discharged, and the air in the bag is exhausted in all directions.
Nick brand green storage forage baler is safe and reliable, low power consumption, economical and reasonable, convenient to use, simple to maintain and operate. It is a good helper for your production

2020-08-21

Waste plastic balers are commonly used in various waste paper factories, waste recycling companies and other units and enterprises. They are suitable for packaging and recycling waste paper, plastic straws, etc., and are good equipment for improving efficiency, increasing waste, and reducing transportation costs. But, do you know the danger of high oil temperature?

1. The oil disclosure of waste plastic baler is more severe. If the pressure of the oil pump is adjusted too high, the sealing gap will increase due to the wear of the movable parts, the sealing installation will be destroyed, and the viscosity of the oil used in the waste plastic baler will increase.

2. The system has no unloading circuit or unloading circuit behaves badly. In the waste plastic baler system, there is no need to pressurize the oil. The oil is still overflowing to the fuel tank under the working pressure set by the overflow valve or to the fuel tank downstream in an environment with a relatively high unloading pressure.

3. Poor heat dissipation. Insufficient heat dissipation area of ??the fuel tank, too little oil storage in the fuel tank, causing the oil to circulate too fast, the cooling effect of the waste plastic baler cooler is poor, such as the failure of the cooling water supply or the failure of the electric fan, the surrounding air temperature is higher than the initial temperature, etc. Bad reasons.
4. Misuse of oil with too high viscosity, waste plastic baler caused excessive hydraulic loss.

Nick brand waste plastic baler has good rigidity, toughness and volatility, beautiful appearance and stingy, convenient operation and maintenance, safe and energy-saving, and low investment in equipment foundation engineering. It can better serve you.

2020-08-19

There are many popular names for automatic waste paper box baler. Common ones are: automatic hydraulic waste paper baler, horizontal automatic waste paper baler, automatic compressed waste paper baler, automatic waste paper baler, full Automatic waste paper hydraulic baler, waste paper automatic baler, automatic horizontal waste paper baler, etc. The working principle of the automatic waste paper baler: The waste paper hydraulic baler lead frame is composed of 4 sets of wire devices installed on a frame. The entire lead frame is suspended on a central axis of the compression frame, and is opposite under the action of a hydraulic motor. The compression frame moves in a horizontal direction. The compression frame is a welded component. The bottom is equipped with wheels, which can move horizontally along the main slide rail under the push of a hydraulic cylinder. The lifting platform is mainly formed by bolting two horizontal beams, and the lifting platform can move up and down in the vertical direction under the push of two hydraulic cylinders. The whole packing process consists of auxiliary time such as pressing, returning, carrying, transferring, outgoing up, outgoing down, and receiving. The main purpose of the conveyor is to provide the host with compressible raw materials in a timely manner, because manual feeding is almost impossible. The working efficiency of the main machine is high, and the insufficient supply of raw materials will reduce the efficiency of the whole machine. The conveyor of the waste paper baler works in unison with the host, and does not affect each other. When the main engine silo is full, the conveyor will automatically stop feeding and wait for the main engine to compress and pack. After the host completes a compression and packaging process, the conveyor automatically supplies waste paper. Utilizing the time gap between the two to work uninterruptedly, the overall efficiency of the equipment is improved.

The Nick brand automatic waste carton packer is simple to operate and automatically packs out, which improves work efficiency. The installation of emergency stop settings makes the operation safer.

2020-08-19