The rice husk briquetting machine is used to compress wheat husk,rice husk,rice husk,chaff,sawdust,hay,waste edible fungus bag,and all compressed fuel that can be compressed into bags to meet the requirements of reducing freight and saving space.
Now the high-speed limit is limited in height and width,and overloading cannot be used on the road.The best way is to use a rice husk briquetting machine to compress and pack the loose material rice husk,which can reduce the freight.
Operation process of rice husk briquetting machine
 1.The rice husk is fed to the compression box of the equipment through the hopper,belt conveyor,and screw conveyor.
 2.It is squeezed horizontally by the horizontal cylinder of the equipment.

 3.After the second longitudinal extrusion of the longitudinal oil cylinder of the equipment,the cuboid is packed.

 4.Then push the compressed rice husk block into the bag by pushing the bag cylinder.
The recycling value of rice husk is very high.The rice husk from the rice factory is too small for long-distance transportation,which greatly limits the output and benefits of the rice factory.
After years of testing and improvement,Nick Machinery has developed a rice husk baler,which can not only compress rice husks easily,but also process soft materials such as wood chips and coconut chaff,which has won unanimous praise from customers.please visit our website:www.nkbaler.net,or call: 86-29-86031588

2020-11-16

Crushing is one of the important steps in the green storage of feed straw.The crushed straw feed needs to be dried.If the humidity of the straw fragments is too high, it will cause blockage of the packaging equipment.If it is over-dried,it will be difficult to form. This will make the straw baler hydraulic and mechanical wear more serious and it is easy to loose bales after forming.Therefore,choose the drying method according to the production situation in different regions:

1.The natural drying method.After crushing the straw feed,spread it in a sunny place and use the sunlight to evaporate the water.This method is more suitable for manufacturers with premises and lower cost control,but for raw materials Moisture is not easy to control and is easily restricted by weather.

2.The manual drying method can be adopted,and the straw feed can be dried manually. In this case,a dryer is used.The dryer can adjust the moisture content of the straw,which has the advantage that the time for drying is short and the effect is good.
Therefore,when the straw baler is used for production and processing,the above two drying methods can be used to dry the raw materials.
The straw baler produced by Nick Machinery has simple structure,stable action,simple operation,low failure rate and easy cleaning and maintenance.It is a good helper for your production.

2020-11-13

The oil pump failure of the waste paper baler mainly includes oil pump failure,oil suction pipe failure,etc.If the oil pump of the horizontal waste paper baler does not discharge oil,you can check and troubleshoot the fault according to the following methods.
1.If the rotation direction is wrong,stop immediately and correct the rotation direction of the motor.If it continues,it is likely to burn or damage the oil pump.
2.The oil pump of the waste paper packing machine does not rotate.Repair the following couplings.
3.The filter of the fuel tank is clogged,and the suction pipe should be checked.

4.If the viscosity of the anti-wear hydraulic oil of the waste paper baler is too high,pay attention to changing the oil type and install a heater.

5.The suction pipe of the oil pump is not well-sealed.If there is gas,check the suction pipe.
6.The fuel tank filter capacity is insufficient and replace with a larger capacity,pay attention to more than 2 times the pump capacity
The Nick brand waste paper baler is easy to operate and automatically discharges the bale,which improves work efficiency.The installation of emergency stop settings makes the operation safer.
For more information about hydraulic waste paper baler,contact 86-029-86031588 or visit:www.nkbaler.net

2020-11-13

Hydraulic straw balers are classified from the transmission mode.The current waste paper balers,straw balers,plastic bottle balers and other equipment all adopt this method. Therefore,when we hear of hydraulic straw balers,It refers to the waste paper baler equipment currently using hydraulic systems.

The straw baler has two processes to process the straw.After the straw is fed into the straw baler,it undergoes two-stage compression inside the machine to realize the straw baling process.

In the first stage,the straw is relatively loose and requires a small amount of pressure to achieve a larger proportion of deformation.This compression process of the straw baler is mainly to reduce the gap between the straws.Since the straws are relatively loose,the compressed volume at this stage is relatively large.easy to accomplish.

The second stage is mainly compaction.After the first stage of compression,the density between the straws is reduced,and greater compression requires more pressure to achieve.The deformation amplitude of the straw becomes smaller,but the pressure needs to increase faster.The pressure of the straw baler at this stage is mainly to overcome the gaps between the straws.During the compression and packaging process at this stage,it will be affected by the moisture content,feed volume and loading speed.

While developing the performance of the Nick Machinery automatic straw hydraulic baler,it must also reduce the price of the automatic straw hydraulic baler,so that customers are truly aware of the automatic straw hydraulic baler when using the automatic straw baler.Convenient and affordable.
For more information about hydraulic straw baler,contact 86-029-86031588 or visit: www.nkbaler.net

2020-11-12

Any machine must be operated safely,and the straw baler is no exception.Today,Nick summarized the electrical safety operating procedures of the straw baler,and I suggest that everyone understand it.  
1.Electricians must hold certificates to work.Non-electricians are prohibited from repairing electrical equipment and wiring.
2.The electrician on duty and those who perform electrical work or those who work in dangerous areas such as step voltage and electric shock near high-voltage areas must wear insulated shoes.

3.All hand-held power tools (electric welders,planing machines,hand drills and other small electrical appliances) must be grounded or connected to zero,and effective leakage protection devices must be used before use.Wear insulating gloves or be on the ground before use.Pad insulation pad.

4.All electrical equipment,electronic components,etc.,if any leakage or damage is found,stop using them immediately and notify the electrician for inspection and repair.
5.Temporary lighting should use low-voltage lamps below 36 volts,and use low-voltage lamps below 12 volts for lighting in particularly humid or metal containers.It is strictly forbidden to use high-voltage lamps with 220 volts as running lights.
6.You must wear insulated gloves when working on live lines,overhauling,or working with power tools in wet areas,metal containers,and metal frames.
7.In the event of a sudden power failure during the production process,the power supply must be cut off quickly,the machine must be operated again,and the power must be turned on in order to prevent a sudden start to cause a personal accident.

8.When pulling the high-voltage isolating switch with electricity,you must use qualified insulating rods and insulating gloves.

9.It is strictly forbidden to sprinkle water on electrical equipment and lines.Clean up water near the electrical equipment in time.It is strictly forbidden to hang clothes and other items on all electrical lines to prevent breaking and causing electric shock.
10.Make a careful record of the operation of electrical equipment
Be careful and be prepared to operate the machine.
Nick brand straw baler is safe,reliable,low power consumption,economical and reasonable,easy to use,simple to maintain and operate.It is a good helper for your production.
For more information about hydraulic straw baler,contact 86-029-86031588 or visit: www.nkbaler.net

2020-11-12