For the straw baler,if the hydraulic oil needs to be replaced after the equipment is installed or used for a long time,the hydraulic system must be cleaned.What should be paid attention to when cleaning hydraulic system?Next,Nick Machinery will briefly introduce it.
1.Organize environmental sites.
2.Choose to use low-viscosity special cleaning oil.When cleaning,add the oil to the oil tank of the hydraulic baler and heat it to 50-80 degrees.

3.Start the hydraulic pump and work idling.When cleaning,you should often tap the tube gently to remove the attachments.Clean for about 20 minutes to check the contamination of the oil filter,clean the filter,and then clean again,repeat the operation,Stop until there are no contaminants.

4.For a more complex hydraulic system,it can be cleaned according to the working area,or it can be directly connected to the hydraulic cylinder and let the hydraulic cylinder reciprocate for system cleaning.
5.After cleaning,drain the cleaning oil,clean the inside of the oil tank,and then remove the temporary cleaning line to ensure recovery to normal working conditions,and add hydraulic oil.

Nick brand straw baler is safe,reliable,low power consumption,economical and reasonable,easy to use,simple to maintain and operate.It is a good helper for your production.

Please visit our website:www.nkbaler.net,or call: 86-29-86031588

2020-11-17

The briquetting machine is specially used for compressing wood chips,wood flour,shavings,coconut mud,peanut husks,corn stalks and other materials.The rice husk briquetting machine is a briquetting machine for compressing rice husks,which can squeeze the rice husks into blocks.Convenient for transportation and storage.
Operation process of rice husk briquetting machine
1.The rice husk is fed to the compression box of the equipment through the hopper,belt conveyor,and screw conveyor.

2.It is squeezed horizontally by the horizontal cylinder of the equipment.

3.After the second longitudinal extrusion of the longitudinal oil cylinder of the equipment,the cuboid is packed.
4.Then push the compressed rice husk block into the bag by pushing the bag cylinder.
The process of rice husk briquetting machine is relatively simple,pay attention to safety when operating.

Nick rice husk briquetting machine is fully automatic operation,continuous delivery,fast speed,and particularly convenient to use.

please visit our website:www.nkbaler.net,or call:86-29-86031588

2020-11-17

The bagging machine is mainly suitable for the compression of corn cobs,straws,wood chips,rice husks,cottonseed husks,peanut husks and other scraps.The bags are directly bagged after compression,which is convenient for storage and reduces production costs.

The bagging machine is a fully automatic high-efficiency hydraulic baler newly developed by Nick Machinery,with a high degree of automation.This equipment has low failure rate,high pressure,stable operation and simple operation.The structure is reasonable,firm,easy to use and maintain,which greatly improves productivity and reduces energy consumption and costs.

The equipment of other manufacturers can also work normally under the low moisture content state where the equipment of other manufacturers cannot be pressed normally,and it is very suitable for use with the automatic feeding system.It can also be designed and manufactured according to the compressed size required by the customer.
Welcome friends from all over the world to come to consult and purchase.Company website:www.nkbaler.net,Tel:86-29-86031588

2020-11-16

The rice husk briquetting machine is used to compress wheat husk,rice husk,rice husk,chaff,sawdust,hay,waste edible fungus bag,and all compressed fuel that can be compressed into bags to meet the requirements of reducing freight and saving space.
Now the high-speed limit is limited in height and width,and overloading cannot be used on the road.The best way is to use a rice husk briquetting machine to compress and pack the loose material rice husk,which can reduce the freight.
Operation process of rice husk briquetting machine
 1.The rice husk is fed to the compression box of the equipment through the hopper,belt conveyor,and screw conveyor.
 2.It is squeezed horizontally by the horizontal cylinder of the equipment.

 3.After the second longitudinal extrusion of the longitudinal oil cylinder of the equipment,the cuboid is packed.

 4.Then push the compressed rice husk block into the bag by pushing the bag cylinder.
The recycling value of rice husk is very high.The rice husk from the rice factory is too small for long-distance transportation,which greatly limits the output and benefits of the rice factory.
After years of testing and improvement,Nick Machinery has developed a rice husk baler,which can not only compress rice husks easily,but also process soft materials such as wood chips and coconut chaff,which has won unanimous praise from customers.please visit our website:www.nkbaler.net,or call: 86-29-86031588

2020-11-16

Crushing is one of the important steps in the green storage of feed straw.The crushed straw feed needs to be dried.If the humidity of the straw fragments is too high, it will cause blockage of the packaging equipment.If it is over-dried,it will be difficult to form. This will make the straw baler hydraulic and mechanical wear more serious and it is easy to loose bales after forming.Therefore,choose the drying method according to the production situation in different regions:

1.The natural drying method.After crushing the straw feed,spread it in a sunny place and use the sunlight to evaporate the water.This method is more suitable for manufacturers with premises and lower cost control,but for raw materials Moisture is not easy to control and is easily restricted by weather.

2.The manual drying method can be adopted,and the straw feed can be dried manually. In this case,a dryer is used.The dryer can adjust the moisture content of the straw,which has the advantage that the time for drying is short and the effect is good.
Therefore,when the straw baler is used for production and processing,the above two drying methods can be used to dry the raw materials.
The straw baler produced by Nick Machinery has simple structure,stable action,simple operation,low failure rate and easy cleaning and maintenance.It is a good helper for your production.

2020-11-13