There are many kinds of failures in the hydraulic system of the scrap shears. One failure may be caused by many factors, which brings great difficulties to the diagnosis and analysis. Therefore, in the repair of the hydraulic system of the scrap shears, it is necessary to Use some practical methods with strong operability to diagnose.
Fault diagnosis method of scrap steel shearing machine:
1. Exchange method
When only a certain circuit or a certain function is lost in the hydraulic system, replace and install the same components on the hydraulic press of the same type, structure and principle in the same position. If the fault persists, it means that the component is not If the problem does not exist, use the same method to check other components. If the fault does not exist, it means that the component is faulty.
The advantage of this method is that even if the repairer has a low technical level, it can be used to make an accurate diagnosis of the fault of the hydraulic machine.
2. Auxiliary method
With the help of simple auxiliary parts, it can diagnose whether the hydraulic components of the hydraulic shearing machine are malfunctioning.
1) Artificial reversing method, using the ejector rod to reversal valve components, can diagnose whether the reversing valve is stuck, the valve core is not in place and other faults.
The auxiliary method avoids excessive disassembly workload, reduces fault diagnosis time, and facilitates rapid diagnosis, especially for larger cylinder seals. This type of fault diagnosis has good practicability.

2) The oil blocking method, such as blocking the oil ports of valve components and cylinder oil ports, can diagnose whether these hydraulic components are leaking or failing.

The machines produced by NICKBALER have the characteristics of many varieties, complete specifications, and strong compatibility, and can be designed and manufactured according to customer requirements. https://www.nkbaler.net

2021-10-26

Hydraulic oil is the working medium of the hydraulic system. Whether the hydraulic oil is clean or not will not only affect the service life of hydraulic components and the working performance of the hydraulic system, but also directly affect whether the hydraulic metal shearing machine can work normally.
Therefore, it is very important to prevent oil contamination of hydraulic metal shears.
1. The hydraulic oil of the metal shearing machine should be kept clean before use. The hydraulic oil will be contaminated by the outside world during transportation and storage. The newly purchased hydraulic oil looks very clean, but it is actually very dirty. It must be left for a few days. , After being filtered, it is added to the hydraulic system for use.
2. Keep the hydraulic oil clean during work. The hydraulic oil will be polluted by the environment during work. Therefore, try to prevent the intrusion of air and moisture. In order to completely eliminate the intrusion of water, air and pollutants, seal the oil tank and add air to the vent hole. Filter.
3. The fuel tank should be properly sealed, and air filters should be installed in the atmosphere, and the seals must be reliable. It is forbidden to use non-oil-resistant seals and hoses.

4. Replace the oil regularly. The oil tank must be cleaned once before replacing the new oil. When the system is dirty, it can be cleaned with kerosene. After draining, inject new oil.

NICKBALER hydraulic metal shearing machine has the characteristics of high work efficiency, low energy consumption, strong workplace adaptability, and reasonable price. https://www.nkbaler.net

2021-10-25

The hydraulic cylinder of the hydraulic shearing machine is the power conversion device in the hydraulic system, so it is essential to do a good job in the daily maintenance of the hydraulic cylinder of the hydraulic shearing machine.
Daily maintenance skills of hydraulic cylinders of hydraulic shears:
1. Cleaning:
The pipeline and the fuel tank should be cleaned to prevent falling off oxide scale and other sundries. For cleaning, use lint-free cloth or special paper. The fuel tank should be sealed to prevent contamination.
2. Open the box and change the oil:
After long-term use of hydraulic shears, foreign matter will inevitably enter the hydraulic cylinder, which will increase friction during use. In addition, the hydraulic oil has a certain service life. If the oil is not changed, the hydraulic cylinder will be damaged or corroded. .
3. Inspection of each part:
The oil cylinder of the hydraulic cylinder should also regularly check the leakage of each seal, as well as whether the bolts of the connecting parts are loosened or not, so as to prevent accidents.
4. Temperature:

Control the temperature of the hydraulic system. Excessive oil temperature will reduce the service life of the seal. Long-term high oil temperature will cause permanent deformation of the seal, or even complete failure.

NICKBALER keeps abreast of market development trends, continuously improves technical capabilities, and strives to introduce more Baler equipment that meets social needs. https://www.nkbaler.net

2021-10-25

Keeping pace with the times and continuous innovation are the survival of each enterprise and the foundation of each product. NICKBALER insists on studying the core technology of products, and continuously increases product research and development. The gantry shear equipment produced by it is in quality , Environmental protection, safety and other aspects have become the benchmark for the industry's market sales and reputation.
Below, we will summarize the three major advantages of gantry shears that stand out in the recycling market:
1. Technological innovation
At present, all walks of life in our country have generally entered the era of mechanization, and the technical content of gantry shears directly determines the future development space of the equipment.
Old-fashioned shearing machine equipment can no longer meet people's needs. The NICKBALER gantry shearing machine combined with the existing shearing machine makes the equipment move in the direction of automation, intelligence, and green development, and overall improves the work efficiency of heavy-duty cutting machinery.
2. Market innovation
Scrap metal is an important renewable resource in my country. If scrap metal resources are in short supply, it will restrict the development of the recycled metal industry. Therefore, it is necessary to realize the full application of gantry shears to promote the application of equipment in various industries. Manufacturers treat equipment with a strategic vision Actively expand the application field of the equipment as much as possible.
3. Marketing Innovation

Nowadays, various publicity platforms such as Internet+, e-commerce, and WeChat business are highly concerned. The gantry shear industry can also learn from it. Expand the equipment publicity platform, broaden the equipment marketing channels, and increase the market awareness of gantry shears. , Establish a brand image.

NICKBALER has independent structural design and production process innovation capabilities, and has mastered key technologies such as product design, system integration, energy-saving, fast and high-efficiency. https://www.nkbaler.net

2021-10-25

Metal shearing machine is one of scrap metal processing equipment. It is used to realize scrap metal recycling and cut-to-length cutting of metal profiles. It has a large shearing force and a wide range of materials that can be cut. The cutting size can also be adjusted at any time. According to the size of the material to be cut, the size of the cutting opening can be adjusted arbitrarily to achieve higher work efficiency.
The NICKBALER metal shearing machine has fast speed, high processing accuracy, long service life, large opening, high flexibility of tool holder fixing and adjustment, safe operation and use, and easy realization of overload protection.
The metal shearing machine has reasonable technical parameters, a wide range of applications, and low energy consumption. It is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, and cold shearing and cutting of various shapes of steel and various metal materials deal with.
The shear force of the NICKBALER metal shearing machine can be from 63 tons to 400 tons in eight levels, which is suitable for users of different production scales. The equipment is equipped with a hydraulic system and does not require manual shearing, which not only improves the efficiency of shearing, but also reduces The risk factor of the operation.

At the same time, the scissors mouth can be cut or stopped at any cutting position in the working process, and the operation is free.

NICKBALER has a large brand influence in renewable resource recycling, scrap steel processing and other industries, and has a high reputation among customers. https://www.nkbaler.net

2021-10-22