1. String the Baling Machine rope through the automatic tensioning device behind the vertical waste paper baler, and place it along the Baling Machine belt groove, then bundle the Baling Machine belt to the pull-stop at the bottom of the Baling Machine groove, and rotate the automatic elastic tensioning device 90 degrees, Close the bottom door and lock it.
2. Put in the material, when the material is loaded to the height of the platen, close the door tightly and press the "down" button. The equipment runs automatically and compacts. (The feeding height of materials other than cardboard can only be slightly higher than the bottom door).
3. The pressure plate moves down and compresses to the maximum pressure and automatically returns to the fully open position. When compressing the Baling Machine constraints, the platen stops at the preset position of the compressed material.
4. Open the door of the device and pass the tie rope through the bottom wire groove from front to back and back to the front through the pressure plate wire groove. Tighten the tie rope by hand and tie a knot. Push the Baling Machine rod by hand, push the rod to a fixed position, and clamp it tightly. Press the "Up" button, the return stroke of the cylinder will automatically turn out the bundled bundles. (No one is allowed to stand in front of the door when the lower door is opened, so as to avoid accidental injury from the door bounce)

5. After the bale is ejected, reset the bale rod to press down. Finally, the bale is removed, the door is closed and locked for the next bale cycle task.

NKBALER reminds you that in the process of using the waste paper baler, you must strictly follow the product instructions to ensure safe and effective production. If you have other questions, you can go to the website of NKBALER Company https://www.nkbaler.net/.

2022-05-20

Looking back at the history of machinery and equipment industries such as vertical balers in my country, we focus on output, quality, and service items. The vertical baler starts to hit the vertical.
When the biomass industry such as charter flights was just starting, the sales market was tight, and output was an important factor in the decision-making of enterprises. Therefore, many enterprises blindly produce and expand their business rules.mold, and even to give up the quality of vertical balers to obtain output. This not only damages the vertical baler, but also is not conducive to the development trend of the industry itself.The ill effects of such practices as the natural vertical baler have already been seen in overproduction. The situation of overcapacity has on the contrary blocked industries such as vertical balers.
With the continuous development of healthy development trend, everyone has to change the development trend method to win by quality. As everyone knows, with the increasingly fierce market demand,The vertical baler has long been unable to meet the market demand only by relying on quality.
The vertical baler clearly puts forward higher regulations for the enterprise. Under such circumstances, who can meet the requirements of the vertical baler and provide the customer with vertical baling Only through a full range of service items can customers trust the manufacturer and get a long-term development trend. Therefore, heavy service items have become stand-alone balers and other products.
Specific ways for material forming machinery and equipment enterprises to improve their competitiveness. Statistics show that vertical baler manufacturers do have a peak market sales period every yearCompared with the off-season, but thinking about off-season issues from a different perspective, the results of the vertical baler are completely different.
Companies with off-season concepts generally reduce capital investment in vertical baler production and terminate vertical baler market research and customers when the off-season comes.
Feedback and so on to control the cost of capital investment. Enterprises with no off-season sales market generally will Using this time to grasp the new requirements of customers, research the market conditions of the sales market, etc., the vertical baler finally integrates its own vertical baler and technical vertical baler.
The charter point keeps pace with the times, thereby increasing the sales of vertical balers such as vertical balers. It is not difficult to see that the concept of off-season is different, but it has caused.Different popularity, and the latter is a vertical baler method that allows enterprises to get rid of the trough period of sales and ensure that the vertical baler has no off-season.

NKBALER is a comprehensive enterprise integrating design, production and sales. The company has advanced processing equipment and is equipped with advanced computer-aided design system, sophisticated design, accurate testing, and superb technology form a complete quality assurance system. https://www.nkbaler.net/.

2022-05-19

1.It is a high-efficiency and energy-saving equipment with a high degree of automation, low price, high output and labor saving.
2. During operation, the straw baler machine consumes less power and is easy to operate; during operation, it has no pollution, good performance and powerful functions.

3. In terms of performance, the straw baler machineis very good and has a good price/performance ratio; compared with similar equipment, it can improve the technological  content of mechanical equipment and ensure its function

4. The corn stalk baler machineis more advanced, so the processing speed will be faster, and it only takes a short time to complete  the work, which will improve the efficiency of the work.From the above analysis, the economic benefits of straw baler machine are more obvious.

NKBALER hereby warmly reminds you: in the process of using the product, be sure to operate in strict accordance with the operating instructions, which can not only protect the safety of the operator but also reduce the Minimize the loss of equipment and prolong the service life of equipment. If you have any questions during use, please feel free to call us, our phone number is 86-29-86031588.

2022-05-19

With the rapid development of the logistics industry, how to deal with waste cardboard has become a first-class problem, and the birth of the waste cardboard balers formally solved this problem. The waste cardboard balers cannot be processed without the help of the waste cardboard balers.
However, most people are not very concerned about the operation of the equipment, leading to a series of failures that affect the normal operation of the equipment. Today, I will talk about the operating specifications of the waste cardboard baler. I hope everyone will follow the specifications when using it. In order to avoid accidents caused by improper operation.
1. The waste cardboard baler should be idling for three minutes before use. Check the equipment when idling, and use it after confirming that there is no problem with the equipment.
2. The box cover door should be closed before work, and the door cover should be closed after the work, and the power supply must be cut off before the personnel leave.
3. The waste cardboard baler is under high-load work for a long time and needs regular maintenance to increase the service life of the equipment and reduce the work loss of the equipment.

4. During use, if there is an abnormal condition of the waste cardboard baler, it should be checked in time to find out the problem, and it should not be used blindly when the problem is not determined.

NICKBALER has an experienced and strong after-sales service team. If you have any questions during the use of the product, you can contact us for consultation, contact 86-29-86031588

2022-05-18

As a common shearing equipment, the gantry shearing machine can easily cut various waste technical materials. The use of the shearing machine makes the recycling of scrap metal easier. Next, let’s talk about the characteristics of the gantry shearing machine. :
1. Gantry shears are mostly used for cutting metal materials, to deal with some cutting tasks that cannot be completed by humans.
2. The cutting speed of the gantry shearing machine is faster. As long as the switch of the shearing machine is operated, the cutting operation can be carried out, and the manpower only needs to place the material that needs to be cut in the equipment.

3. The quality of the blades of the gantry shearing machine is better, and the high-quality high-hardness materials are used to ensure that the cutting operation will not occur during the cutting operation. Higher than similar products, reducing the need for blade replacement.

The birth of the NICKBALER gantry shearing machine greatly reduces the manpower input of the shearing operation, improves the efficiency of the shearing work, and reduces the transportation cost. www.nickbaler.net

2022-05-18