The electrical equipment control parts of the waste paper baler are mainly composed of PLC, electric motor and its relays, and electrical components of the power switch. Among these parts, the most vulnerable parts are the motor and its electrical components. NICKBALER waste paper baler electromechanical The usual precautions for the control box:
1. Pay attention to the grounding protection, lightning protection, waterproof, rainproof and moistureproof of the power cord.
2. It is strictly forbidden to use electrical cabinets other than the actual operating staff.
3. Pay attention to the cold-proof work of the motor and the long-term load of the motor. Treating these two items can greatly reduce the damage of the motor, thereby maintaining the normal baling machine of the  waste paper baler.

4. Pay attention to the actual operation of the buttons on the console. The button switch does not need to be too hard, and it is necessary to strictly prohibit operation errors to prevent damage caused by short-circuit faults.

NICKBALER Machinery has continuously accumulated experience in the use of waste paper balers, and has mastered relevant skills and knowledge, so that waste paper balers can better complete their tasks. https://www.nickbaler.net

2023-02-08

Metal baling press machine: There are two types of metal lip baling press machine and metal baler. According to the high pressure, all kinds of metal waste can be directly cold-extruded and formed, which is beneficial to dry paste storage, logistics transportation, recycling and full utilization.
The metal chip baling press machine can directly cold-press powdered cast iron chips, steel chips, copper chips, aluminum chips, and high-quality mineral powder into cakes, which are convenient for storage, logistics transportation, and recycling and reuse. After pressing into a block, it is put into the furnace for recycling, and the utilization loss is extremely low. The overall production process does not need to be heated, and it can be directly cold-extruded by adding additives or other processing techniques. At the same time, the original material remains unchanged. For example, after the cast iron layer is formed, it can be used instead of cast iron. Compared with castings made of special materials, recycling has a greater effect.

The metal baler can extrude all kinds of relatively large metal scraps, scrap steel, scrap iron, scrap copper, scrap aluminum, disassembled car shells, waste oil drums, etc. into cuboid, cylinder, octagon and other shapes of qualified charge. It is convenient for dry storage, logistics transportation, and recycling and recycling. Mainly used in dry steel mills, recycling production and processing fields, non-ferrous and ferrous metal smelting fields, and renewable and full utilization fields.

NICKBALER Machinery Metal Baler is easy to operate, no foot screws are required for installation, and it can be powered by a diesel engine in places where there is no power supply. https://www.nickbaler.net

2023-02-06

NICKBALER has been engaged in the research and development and manufacture of hydraulic equipment for many years, has accumulated rich experience, and has a perfect management system. As a machinery manufacturer, our company has strong technical force, excellent product workmanship, practical and beautiful appearance, and high-quality products are well received by new and old customers. praise. What I am sharing with you today is:
From which aspects should the quality of the hydraulic baler be determined?
1. Quality must be guaranteed, only good quality can ensure our safe use.
2. After-sales service must be in place, only perfect after-sales service can ensure that the problems encountered in use are solved in time.
3. The operation should be convenient. The equipment itself is to improve the baling press efficiency. If the operation is inconvenient, it will greatly affect the improvement of the baling press efficiency.

4, cost-effective, affordable is the last word.

The fully automatic baler produced by NICKBALER has a simple structure, high technical content, stable performance, guaranteed quality, stable action, low failure rate and easy cleaning and maintenance. You are welcome to buy https://www.nickbaler.net

2023-02-03

The automatic hydraulic baler mainly compresses and packs waste plastics, waste cartons, plastic films, etc., to lay the foundation for the next storage and recycling. The equipment is mainly composed of frame, oil cylinder, oil pump, hydraulic valve, motor and other components. It adopts PLC automatic control, simple operation, convenient maintenance, high degree of automation, high pressure, continuous production, and high work efficiency. For the NICKBALER horizontal baler, the cylinders are fixed on the frame, which is more stable and can ensure the stable performance of the cylinders; the hydraulic system is driven, the ribs are strong, and the extruded bale is tighter; the unique automatic baling device , so that the efficiency of the package is greatly improved; the user can also freely set the length of the package, and accurately record the value of the package, which is more convenient for the operator. The automatic baler has low noise, no pollution, safety and environmental protection, convenient operation, low failure rate and easy maintenance.

The fully automatic baler realizes unmanned operation and is suitable for places with a lot of materials, such as: garbage recycling plants, large recycling stations, etc. After the items are compressed and packed, they are easy to store and stack and reduce the transportation cost, which is very popular among customers of favor.

NICKBALER Machinery is a professional manufacturer of waste paper balers, providing more than 140 kinds of hydraulic balers, more consultation with us: https://www.nkbaler.net

2023-02-02

Fully automatic baler, one machine is multi-purpose, can be used for waste paper, waste products, plastic bottles, straw, etc. The machine is simple to operate, long service life, intelligent and integrated, free of manual operation, high work efficiency, low noise, energy saving and environmental protection. Its appearance provides convenience to many waste recycling stations and pressing stations, which not only saves space, but also saves a lot of human resources. NICKBALER Machinery currently has 15 models and specifications of fully automatic balers. The following parameters are different for each device:
1. Compression force
2. Cylinder size
3. Packing size and packing weight
4. Daily output
5. Feeding port size
6. Motor power and voltage
7. Equipment weight

8. Main cylinder and push cylinder

NICKBALER is a professional manufacturer of hydraulic balers, providing more than 140 kinds of hydraulic balers, and supports product customization. Different models can be customized according to different needs of customers. For more information, please pay attention to NICKBALER's website https://www.nickbaler .net

2023-02-01