WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • The waste paper baler equipment has undergone a series of test machine inspection processes before leaving the factory to ensure the normal operation of all aspects of the equipment. When the product leaves the factory, the pressure has been adjusted, the pressure regulating screw of the reversing valve and the overflow valve has been sealed, (or the locking back nut has been locked) It is not allowed to remove the lead seal or loosen the back nut to adjust the pressure during use. In order to prevent damage to the mechanical parts caused by excessive voltage regulation, affecting normal use.
    During the operation and use of waste paper baler equipment, there are many relevant operating specifications and taboos. Such as the daily operation specifications, the maintenance specifications of the waste paper baler after use, and the inspection and maintenance specifications when the equipment is abnormal. Only in accordance with the relevant use specifications, can the waste paper box baler have the longest service life, and then be able to create greater value. Create revenue for the enterprise.

    After long-term use of the equipment, certain maintenance, replacement of hydraulic oil, addition and replacement of various lubricating oils, etc. should be carried out. Some components will be worn to a certain extent, and these worn components must be replaced in time to avoid bigger problems.

    NKBALER recommends that you must follow the instructions for operation and maintenance to effectively extend the service life of the baler. Improve the working efficiency of the baler.
  • The waste paper baler is a very popular product among the baler products. Related companies surveyed and interviewed customers of the waste paper baler and all expressed their satisfaction with the waste paper baler. At the same time, some potential customers said Step is about to buy a waste paper baler.
    The survey report data shows that there are 6 reasons for the selling factors of waste paper baler
    1. The compression method of waste paper baler has simple process, convenient operation and easy maintenance and replacement.
    2. The waste paper baler equipment is simple, the equipment cost is low, and the investment is less.
    3. The waste paper baler is arranged on the ground, and the site is easy to clean.
    4. The waste paper baler has high efficiency.
    5. The working environment of the waste paper baler is clean, low noise, and meets the requirements of environmental protection.

    6. The feeding box is airtight, and the packaged items have no drips, preventing secondary pollution.

    NKBALER is a manufacturer specializing in the production of waste paper balers, providing more than 140 kinds of hydraulic balers. For more information, please consult us: www.nkbaler.com
  • The hydraulic baler is a kind of baler equipment in the machinery industry. When checking the hydraulic baler equipment, first check whether its pressure gauge is abnormal or in normal working condition. The second most important thing is to enter the working state without proceeding. It is necessary to develop the prerequisite inspection and preparation work to avoid the impact on production!
    Do we have a thorough and comprehensive understanding of hydraulic balers? This is also what everyone, especially the learners, care about. So next, in response to this problem, Nick Machinery will give a specific explanation of some content, which is not available before, so that everyone can further understand the product and be able to Get what you want from it and benefit yourself.
    1. The indication of the pressure gauge in the hydraulic baler is normal, but the pressure is unstable. What is the reason?
    Answer: The indication of the pressure gauge in the hydraulic baler is normal, but the pressure is unstable. First of all, you must determine whether the upper chamber pressure is normal or the system pressure is normal. In addition, its working mode is fixed range or fixed pressure. If it is a fixed-range work method, it will have an impact when the pressure is released, so its stretching is unstable. If it is a constant pressure, it is caused by air in the oil circuit or oil pump, or a problem with the oil suction pipe. At this time, check and solve it. In addition, it is also related to materials and molds.
    2. What do the letters on the hydraulic baler model mean?

    Answer: One type of hydraulic baler includes hydraulic pressure, series introduction, and machine tonnage. It should not be mistaken, otherwise problems will occur.

    NKBALER is a manufacturer specializing in the production of hydraulic balers. We have a professional R&D team and after-sales team.

  • With the continuous expansion of plastic balers in the market, there are now more manufacturers of plastic balers. There are more and more small workshops, more and more shoddy, more and more deceived. To produce high-quality plastic balers, we must pay attention to the selection of materials. The main points are as follows:
    1. The choice of steel: For plastic packaging machinery and equipment, the performance of the steel material directly has the greatest impact on the effectiveness and durability of the equipment.
    2. Selection of hydraulic accessories: The hydraulic part is the main power source of the entire plastic baler, and its material selection is related to the operation of the entire equipment and the packaging effect of the equipment.
    3. Selection of electrical components: The electrical part is the control part of the plastic baler, which can control the operation of the entire equipment, and it also relates to whether the equipment can operate normally and use it normally.
    The above three points are the main selection of plastic balers. Due to the high pressure and working intensity of plastic balers, special attention must be paid to the selection of materials. 

    The selection of materials for high-quality plastic balers is the key.

    NKBALER plastic baler has simple structure, stable performance, reliable quality and reasonable price. Welcome to buy.
  • The temperature has slowly begun to heat up, and everyone's demand for drinks has just begun to gradually increase. As the drinks increase, the remaining mineral water bottles will also increase.
    The solution of the mineral water bottle must inevitably involve the mineral water bottle Baler machine. Let's take a look at the advantages of the mineral water bottle Baler machine in the whole process of solving the mineral water bottle.
    The first point: The mineral water bottle balers are all fully automatic and integrated design schemes, which can choose manual actual operation or PLC mechanical automation to carry out work. Naturally, its driving force comes from all hydraulic presses.
    The second point: The feeding method can also be selected differently. For example, there are flip packages, push packages (that is, forward push or side push), and natural services can also be used to fetch packages (naturally this type of package is generally not easy Be chosen).
    The third point: Under all normal conditions, the mineral water bottle Baler is driven by electric engineering, but it is very convenient to turn on the oil extraction machine as the driving force under the condition of no electric engineering.
    The fourth point: Customers can choose different work pressure levels according to their own requirements. There are 10 levels from 63T to 400T. Naturally different levels have different production efficiency. The greater the work pressure, the production efficiency. It is also higher.
    Fifth point: It is easy to transport, so the packaging specifications for mineral water bottles can also be set, and naturally, it must be customized for the compression chamber.
    The sixth point: the curved surface structure is used between the pusher cylinder and the pusher head. Such a design scheme is more excellent at the level of credibility, and can increase the life of the skeleton seal to a certain level.
    Seventh point: The feeding port contains a distributed cutting knife. Such a layout makes the cutting efficiency higher.
    Eighth point: In order to reduce the repair rate of the mineral water bottle Baler, the design scheme of the hydraulic machine control circuit with low noise is generally used.
    The ninth point: the new type mineral water bottle Baler machine does not need all the roadbed, and the installation level is also very simple.

    The application of the mineral water bottle Baler machine also has a great effect on the ecological environment protection. After all, the biodegradable raw materials such as plastic are very harmful to the natural environment, and the promotion of the purchase of this type of product is the natural environment. Larger maintenance.

    NKBALER specializes in providing mineral water bottle balers, plastic balers, hydraulic balers, horizontal balers, etc., with reliable quality and favorable prices. Welcome to buy.
Shaanxi Nick Machinery Equipment Co.,LTD 
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top