WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • Scrap metal baler: mainly used in recycling processing industry and metal smelting industry.

    Various metal scraps, steel shavings, scrap steel, scrap iron, scrap copper, aluminum scrap, aluminum shavings, dismantled car shells, waste oil drums and other metal materials can be extruded into various shapes of qualified materials such as cubes and cylinders. . Easy to store, transport and recycle.
    Precautions for the new machine running-in period of scrap metal baler
    Always keep the scrap metal baler body clean, adjust and loosen the loose parts in time to prevent the parts from being worn out or the parts being lost due to looseness.
    Before using the new waste paper baler, you should always check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water), and check the tightness of the scrap metal baler. At the same time, it is necessary to strengthen the lubrication of each lubrication point. It is recommended to fill the lubrication point with grease every shift during the running-in period. Pay attention to the instruments of the scrap metal baler equipment. If it is abnormal, stop it in time to eliminate it.
    When the running-in period is over, the machine should be forced to support, check and adjust the work, and pay attention to the exchange of oil. Pay attention to the working load during the running-in period. The working load during the running-in period should not exceed 80% of the rated working load, and the appropriate workload should be deployed to prevent the overheating caused by the long-term operation of the machine.
    2019-07-04
    Share:
  • The waste paper baler is used to extrude waste paper and similar products under normal conditions, and is packaged and formed by special packaging belts, so that the volume thereof is greatly reduced, thereby reducing the transportation volume, saving freight, and increasing the efficiency for the enterprise. Introduced advanced technology and advanced technology of similar products at home and abroad.

    The horizontal waste paper baler produced can achieve the following three functions.
    1. Investment economic requirements, no matter what investment.
    Skills to meet production needs can be investment or economic requirements. The semi-automatic horizontal waste paper baler can meet the packaging capacity of waste paper below 100 tons per day, which is much lower than the price of the fully automatic waste paper baler. Low investment costs, high production efficiency, use processes, and maintenance and repair are all simple. It allows customers to handle faults extremely quickly during use, reducing downtime.
       2. Meet the reliability requirements.
    The reliability requirement refers to the probability that the horizontal waste paper baler can work normally under the specified use time and the predetermined curved environment.
    3. Implement the predetermined function.
    The horizontal waste paper baler equipment designed by the designer can achieve the predetermined function and efficiency under the specified working conditions and within the specified life span, and can operate normally.
    Shaanxi Nick Machinery Equipment Co. LTD
    TEL: 86-29-86031588
    Fax:86-29-86031588 Sitemap
    Add:RongHao Industry Garden,Xi'an,Shaanxi,China
    Email:sales@nkbaler.com
    WhatsApp: 008615021631102
    2019-07-01
    Share:
  • The straw baler is an environmental protection device that utilizes the hydraulic principle to compress straw, straw, etc. into pieces, which is conducive to the savings, transportation and utilization of straw. Now widely used in the agricultural animal husbandry industry, it has played a huge role in the protection of the environment and resources.

    What are the factors affecting the quality of straw balers?
    The color of the straw baler: The straw baler on the market is generally white (other colors should be bright), the quality is better, because these are not easy to mix old materials.
    The appearance of the straw baler: the straw baler has good toughness, and the straw baler is repeatedly folded, and the toughness is not easy to break. Pattern problem, the pattern should be beautiful, and there should be no pressure deviation.
    The size of the straw baler is judged: the width and width error of the straw baler are generally plus or minus 0.3 mm. Such a baler belt has a uniform material discharge and a relatively uniform quality, and does not appear to be in a good or bad condition.
    Judging by the cross section of the straw baler: Some straw balers are made of new materials outside, and the middle clamps are filled with materials. As long as the cut section is cut, you can see that the black heart inside is poor quality.

    The gloss of the straw baler: the straw baler should have a gloss, so the straw baler is generally produced in full material. The tension is stable. If the baler is mixed with powder, the gloss will be greatly reduced.

    as more information,visit us :www.nkbaler.com 


    2019-06-30
    Share:
  • The waste plastic hydraulic baler is mainly suitable for the packaging of loose materials, such as waste plastics, cartons, straw, wheat straw, straw, beverage bottles and other compression packaging.

    Characteristics
    1. Hydraulic configuration: The regenerative oil has a fast and low-noise hydraulic circuit system. It combines imported and domestic high-quality components to ensure the quality and reduce the cost, and the performance of the whole machine is stable.
    2. Electrical configuration: PLC control is adopted to make the circuit simple, the failure rate is low, and the inspection and elimination are simple and fast.
    3. Shearing knife: The internationally-used scissors design is adopted to improve the cutting efficiency and extend the service life of the blade.
    4, wire feeder: the latest international wire tying device, saving wire, fast binding, low failure rate, easy to clean and maintain.
    5. Conveyor: The conveyor belt adopts new PVC material, which is resistant to corrosion and aging, and has the advantages of non-slip fall, large conveying capacity and strong load capacity.
    6, the length is free to set, accurately record the package value.
    7. Easy installation, simple foundation construction, no need for foundation reinforcement.
    2019-06-27
    Share:

  • Plastic bottle Hydraulic balers should use hydraulic oil that is less affected by temperature changes

    Plastic bottleHydraulic baler hydraulic oil contaminated materials are solid contaminants such as chips, foundry sand, dust, welding slag, liquid contaminants such as moisture, hydraulic baler cleaning oil, as well as air mixed from the atmosphere or hydraulic oil from hydraulic baler Separated air pollutants such as air. These hydraulic baler contaminants are often the source of hydraulic baler hydraulic components or fuel tanks in the manufacture, transportation and assembly, as well as improper cleaning and remain in the system. Hydraulic oil plays a vital role. Hydraulic balers require strict hydraulic fluid requirements when working. Pay attention to the working viscosity of the hydraulic oil, the working temperature and the cleanliness of the working environment. The viscosity of hydraulic oil is sensitive to temperature changes.

    The temperature rise of the Plastic bottle hydraulic baler will significantly reduce the temperature of the hydraulic baler hydraulic oil. Conversely, the change of the viscosity of the hydraulic baler hydraulic oil will directly affect the working performance and leakage of the hydraulic system of the hydraulic baler. Use oils whose viscosity is less affected by temperature changes (or better viscosity-temperature characteristics). Temperature control devices (such as heaters or coolers) are sometimes placed in the hydraulic baler tank to control and adjust the hydraulic baler oil temperature to reduce the viscosity change of the hydraulic fluid.
    2019-06-25
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL: 86-29-86031588
Fax: 86-29-86031588 Sitemap
Add: East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com Nickbaler888@gmail.com WhatsApp: 008615021631102  
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top