Proper use of machinery and equipment, careful implementation of the protection and maintenance system and strict compliance with safe operating procedures are necessary conditions for extending the operating life of the straw baler, improving production efficiency and ensuring production.
To this end, it is advocated that users establish protection and maintenance systems and safe operating procedures. In addition to understanding the machine structure and operating procedures, operators must also pay attention to the following points:
1. The straw baler should smooth the smooth parts of the machine as required.
2. Clean up the sundries in the bin after work every day and keep the equipment clean and tidy.
3. The manufacturer of straw baler reminds that those who do not understand the structure, performance and operation rules of the machine without learning should not start the machine in private.
4. When severe oil leakage or abnormal phenomena occur during work, stop the vehicle immediately, analyze the cause and eliminate the fault, and do not force it to run with disease.
5. The oil tank should be cleaned and replaced with new oil once every six months, but the oil should not be filtered for more than one month in the second cleaning. The new oil used once is allowed to be used again after strict filtration.

6. The oil added to the oil tank must be rigorously filtered, and should always adhere to a sufficient amount of oil. If there is a shortage, the oil should be added immediately. The straw baler is filled with smooth oil every 1.5 hours, and 5 to 6 times less smooth oil is added to each smooth part of each shift (8 hours).

Shaanxi Nick machinery equipment can supply many kinds of baler machine

Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-11

For mechanical and electrical equipment, automation, intelligence, and unitization make the design thoughtful, and its important parts must be considered. The service life of each product is determined by a core component, and that core component is often a valuable one. For example, the core component of the baler is the movement; the core component of the sealing machine is the motor; the core component of the heat shrink machine is the furnace; the production of the winding machine has been modularized, and the core component is in each module. The core component of the vacuum packaging machine is the vacuum pump. Most small vacuum packaging machines now use rotary vane vacuum pumps.

The hydraulic baler adopts PLC control, which can realize the functions of automatic compression, automatic lifting, automatic turning and automatic packaging. And can monitor the production process in real time, complete the functions of automatic diagnosis, automatic alarm and data upload. The successful application of the hydraulic baler control system reduces the work intensity of the operator, improves the operating efficiency and safety of the equipment, reduces the energy consumption, and improves the product quality. The characteristics of the metal baler are as follows:
1. It has the characteristics of small volume, light weight, low motion inertia, low noise, smooth movement and flexible operation.
2. It adopts integrated hydraulic and electric control, which is simple and convenient to use, can stop and run at any working position, and is easy to realize overload protection.

3. It has a wide range of applications. It can be used as a processing equipment for packaging waste plastic film, and can also be used as a processing equipment for packaging and compacting similar products.

for more information ,please visit us : www.nkbaler.com  or whatsapp us :+86 15021631102 

2020-05-09

Semi-automatic waste paper Baler manufacturers: in the waste paper recycling industry, some have strict requirements on the specifications of the waste paper after packaging, and the size of the package block is required. In the process of compressing and packaging the recovered waste paper, we must control the package block The size of the length, width and height. The waste paper Baler is used to squeeze the waste paper and similar products under normal conditions, and pack it with special packaging tape to form it, which greatly reduces its volume, so as to achieve the purpose of reducing transportation volume, saving freight, and increasing benefits for enterprises. The semi-automatic waste paper Baler manufacturer introduced advanced technology and advanced technology of similar products at home and abroad. The waste paper Baler can do this, and the overall appearance of the package can be achieved, and the waste paper can benefit.
  In the original semi-automatic waste paper Baler equipment, the length of the bag was manually controlled. Control visually so that the length of the package cannot be used. If the length is similar, this problem can be ignored. In order to accurately control the length of the package. Our company added a meter counter design to the semi-automatic baler, and set the length of the package through the program. When the package reaches the set length. The packaging machine will stop automatically, and the subsequent packaging work will continue after the rope is tied.as more information ,please visit us : www.nkbaler.net

2020-04-27

  Our waste plastic baler has now changed from the traditional packaging type to more diversified to meet the needs of our different users. Today we will analyze how the waste plastic baler type is operated and controlled for your convenience. Choose our baler type according to your actual situation. The waste paper packer is used to squeeze the waste paper and similar products under normal conditions, and pack it with special packaging tape to form it, which greatly reduces its volume, so as to reduce the transportation volume, save freight, and increase the benefits for the enterprise. Introduced advanced technology and advanced technology of similar products at home and abroad. There are 4 sets of wire feeding device for scrap metal baler, each set corresponds to a baling head, each set includes baling line conveying device and baling line anti-tensioning device. The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The wheels of the compression frame are guided to run along the outer sides of the two tracks, and the hydraulic cylinders that drive the operation of the compression frame are arranged therein.
       In addition, there are a whole set of hydraulic stations besides mechanical components. As can be seen from the above description, various movements of the waste plastic baler are completed by the power of the fluid. Mineral water bottle packing machine This product has the characteristics of good rigidity and stability, beautiful appearance, easy operation and maintenance, safety and energy saving, low investment cost of equipment basic engineering and so on. It is widely used in various types of waste paper mills, old waste recycling companies and other unit enterprises. It is suitable for packaging and recycling of old waste paper and plastic straws. It is a good equipment for improving labor efficiency, reducing labor intensity, saving manpower, and reducing transportation costs. as more information ,please visit : www.nkbaler.net

2020-04-24

The characteristics of the straw (brief: mature crop stem and leaf) briquetting machine are reflected in its raw materials, but also in the following aspects:
First, the design of the equipment is reasonable, quality, and easy to operate. It adopts fully automatic control of electric heating settings, which can randomly adjust the dry humidity of materials and work efficiency;
Second, the small size of the equipment, limited space, low energy consumption, energy saving and power saving;
Third, the materials used in the equipment, and after processing, can continue to produce and work for a long time;
Fourth, in terms of process, the straw baler increased the bearing from three to four for the stability of the machine and the life of the equipment, and the pitch and output were increased. The waste paper packer is used to squeeze the waste paper and similar products under normal conditions, and pack it with special packaging tape to form it, which greatly reduces its volume, so as to achieve the purpose of reducing transportation volume, saving freight, and increasing benefits for enterprises. Introduced advanced technology and advanced technology of similar products at home and abroad. The propeller uses a movable head and a movable rod to reduce maintenance costs and make production easier. In terms of equipment maintenance, the oil-lubricated lubrication is changed to oil-immersed lubrication, and the service life of the equipment.
 Straw baler adopts good equipment, the quality can be made to the quality of the factory products, so that the equipment is well-equipped and good after-sales.as more information ,please visit :www.nkbaler.net 

2020-04-17