The rice husk baler is mainly for rice husk purpose .the speed can make 150 bales per hour ,now we have this machine for 180 bales per hour ,therefore ,the speed and capacity is most higher in whole marketing ,meanwhile ,this machine need bags to pack,its wont loose during transportation ,such this machine ,also for different materials ,the packing way is different ,also it can make block machine ,This Rice Husk Baler Machine is special used for loose mateiral ,for example sawdust, rice husk, wood powder ,papper powder ,fiber ,straw etc. after baling ,The straw block can be packed 
by plastic bag without packing or strapping which make the material easy transport and stack . 
This machine are widely used in animal feeding /bedding material , factorys, plant fertilizer 
factorys and farm etc .

2019-08-23

The waste paper baler is used to extrude waste paper and similar products under normal conditions, and is packaged and formed by a special packaging tape.
The volume is greatly reduced, thereby reducing the transportation volume, saving freight, and increasing the efficiency for the enterprise.
Then the price of waste paper recycling has dropped sharply recently, and many people have a certain negative impact on people who invest in waste paper balers or waste paper packing stations.
Therefore, many people are on the sidelines, because the price of recycling is greatly reduced, so people who invest in the packing station have been on the sidelines.

With the increasing awareness of environmental protection, the waste paper baler has played a big role in the reuse of some waste paper, and it is increasingly accepted by everyone.
Domestic waste paper balers have been constantly innovating, and are constantly following the development of some advanced foreign technologies.

Waste paper baler series products include: automatic waste paper baler, semi-automatic waste paper baler, automatic waste paper baler, plastic bottle baler, hydraulic waste paper baler, wood chip baler,
Horizontal waste paper baler, small waste paper baler, semi-automatic hydraulic waste paper baler, semi-automatic horizontal waste paper baler, metal waste paper baler, automatic waste paper baler, etc., baler products passed CE, SO9001, etc. Domestic and foreign certification, quality assurance, and first-class service.
The price of the baler is moderate, cost-effective!

2019-07-30

Waste paper baler is a mechatronics product, mainly composed of mechanical system, control system, loading system and power system. The whole packaging process consists of auxiliary time such as pressing, returning, carrying, transferring, outbound, outbound, and receiving.

The following is the practice of improving the performance of horizontal waste paper balers.
1. Improve the footprint of the waste paper baler and achieve the largest possible compression force.
2. Adopting new rapid pressurization technology to achieve rapid pressurization and improve the working efficiency of the oil pressure system.
3. For the customer to timely maintain the hydraulic system of the hydraulic waste paper baler, especially to ensure the cleanliness of the hydraulic oil, to prevent the life and reliability of the hydraulic system, resulting in system impact, timely adjustment and adjustment to avoid Causing losses.
4, to improve the pressure loss of the internal flow channel, the use of high-quality hydraulic components and integrated circuit and runner casting, to reduce the pressure loss of the pipeline, while also reducing oil leakage.
5. Reduce the damage of the internal pressure of the component system of the hydraulic waste paper baler and reduce the loss of power.

2019-07-13

1. Clean the dirt and weeds on the corn straw baler in time. Remove the exhaust pipe and clean the dirty cement sand inside. Clean the oil on the engine surface in time. If the oil is too thick outside the engine, it will affect the heat dissipation, and it will cause hidden dangers to various component failures. The high-pressure injection method will clean the engine components without cleaning the cleaning parts of the body parts.
Second, clean the air filter. First clean the filter element with diesel oil, then infiltrate with oil, and then assemble the excess oil after it has been drained from the filter. Remove the cylinder head, take out the valve group, wash the dirt, remove the rust spots and grind the valve.
3. Remove the vortex chamber inserts, clean the impurities, and unblock the main nozzle holes and starting holes that are blocked on the inserts. Remove the connecting rod nut, take out the piston rod set for cleaning, and remove the carbon deposit on the piston with a copper scraper or bamboo stick.
4. Discharge the dirty oil in the fuel tank and clean the fuel tank, diesel filter and fuel injection pump. Release the cooling water and rinse the impurities in the cooling water with water until the clean water flows out from the drain. The lubricating oil in the oil pan is discharged, and the oil pan and the filter are cleaned with diesel oil. After washing, add mixed oil (2/3 engine oil, 1/3 diesel oil), shake the crankshaft several times, clean the lubricating oil tank, then release the mixed oil, and add the clean oil to the specified scale position.
5. Remove the clutch, clean the parts with diesel, wash and dry before installation. Release the gear oil in the gearbox, wash it with diesel oil, and add clean gear oil. Remove the sand from the tires. Clean the dirt on each ball head. Adjust the front wheel toe value and the free angle of the steering wheel. Disassemble the brakes, clean the mud of the brake hub and brake pads, and dry them before installing.
6. Clean the dirt inside the electrical equipment. The coil is dried for inspection of insulation and electrical conductivity. Remove the dirt from the battery poles and apply butter to the line cards and poles. Unscrew the filling hole cover, dredge the vent hole, clean the impurities in the battery with distilled water, wash and add electrolyte to charge.
Seven, cold body explosion-proof tires. In summer, the temperature is high, and the tire rubber is prone to aging. In severe cases, there will be a puncture. Therefore, the tractor should check the tire pressure at any time during driving. If the tire is overheated and the air pressure is too high, the car should be parked in a cool place to cool down. Do not use cold water to pour it, otherwise it will cause a tire burst on the way.
Eight, the engine oil is resistant to deterioration. Lubricating oil is susceptible to heat thinning, poor oxidation resistance, easy deterioration, and even failures such as burning the shaft. Therefore, the crankcase and the gearbox should be replaced with summer lubricating oil, and the quantity of lubricating oil and oil quality should be checked frequently and replaced in time.
Nine, look at the water temperature gauge to prevent water shortage. Driving in hot weather, the water in the water tank evaporates faster, always pay attention to check the amount of cooling water, pay attention to the water temperature gauge. If you are short of water, you should immediately start the idling and cool down, then add water, and be careful not to open the radiator cover immediately to prevent burns.as more information ,please visit : www.nkbaler.net

2019-07-10

The waste paper baler has good toughness and stability, beautiful appearance, convenient operation and maintenance, and low investment cost of equipment infrastructure engineering. It is widely used in various waste paper mills, old materials recycling companies and other unit enterprises. It is suitable for packing and recycling old waste paper and plastic straw. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation costs.
What are the factors that affect the price of the baler?

First, understand pre-sales and after-sales information
Buying an automatic baler to see the price of the automatic baler is indeed a very important way to buy. At the same time, you should know what the pre-sale quality of this product is. What is the effect of after-sales service, especially if there is a problem? Who is responsible, in general, these manufacturers will provide a period of free maintenance, if the free maintenance period is over, how much money you need to continue to purchase their services, these should be understood in advance, save the province Once there is a problem on the production line, it will be very troublesome. How much is the price of the automatic baler?

Generally speaking, the price is relatively high in the process of purchasing automatic balers from the market. Of course, if you package some small things, the overall size may be small, but this does not mean that its price is Cheap, because many sophisticated instruments require more production processes
In the process of purchasing an automatic baler, the overall judgment is based on the production technology of its production technology and the packaging effect that can be achieved.
Look at the brand first
In the process of purchasing an automatic baler, the important part is to select the brand well. For example, the more professional production brand Haoxuan Industry can provide you with more comprehensive pre-sales and after-sales guarantees, although their product prices It can't be considered as cheap among all products, but it can be fully guaranteed whether it is from the quality of the product and the later difficult answers, or if the product is solved in time, it is necessary to know that if there is a problem with these automatic packaging machines. , will lead to the suspension of the entire production line, only with such a guarantee can confirm that there is no problem in our later use process

2019-07-07