The shearing machine is suitable for metal recycling companies, scrap steel plants, smelting and foundry companies to perform cold shearing on various shapes of steel and various metal structures to add qualified charge.
The safe use of shears is as follows:
1. The shearing machine should be operated and kept by a dedicated person. It is necessary for the operator to understand the structure and function of the machine tool.
2. It is strictly forbidden to use the shearing machine with overload. It is not allowed to cut hardened steel and hard steel, high-speed steel, alloy steel, castings and non-metallic materials.
3. When the knife is operated by multiple people, there should be a special person to command, and the cooperation should be harmonious.
4. It is forbidden to cut two different standard materials together on the shearing machine, and it is forbidden to cut by stacking.
5. Prevent the handle from promoting the operation under the pressure plate when cutting the board and feeding. When cutting short material, press it with another iron plate. When cutting material, keep your fingers away from the knife edge at least 200 mm.
6. After aligning with the pry, the pry should be pulled out immediately before cutting. If the iron plate moves, use a wooden pillow to secure it to prevent the prying from popping out and hurting people after the presser foot comes down.
7. The cut workpieces must be placed stably, not piled up too high, and must not be piled up in the aisle. Remaining materials and waste materials should be sorted out in time, and the site should be tidy.

8. The safe operation of the bending machine must abide by this regulation.

Nick plate shears are recognized by many customers with high-quality qualifications and professional craftsmanship according to everyone's actual needs and are trustworthy.

2020-08-19

The automatic strapping machine does not need to insert the belt manually. The trigger mode is divided into a bit of movement, manual, continuous hitting, ball switch, foot switch, photoelectric sensor switch, just press the switch to automatically complete the packaging, convenient and fast, and can realize unmanned automatic Packing greatly saves manpower and is suitable for single machine mass production. The semi-automatic strapping machine needs to insert the strap manually. After the strap is inserted, the machine will automatically complete the strapping, bonding, cutting, and strapping process. Since each product requires manual operation, it is not suitable for mass production. 

The new circuit design makes the baler use plug-in circuit board to control the entire baling action and the temperature of the ironing head. The replacement of the circuit board is quite convenient and the baler service is convenient.

Nick brand automatic baler has simple structure, stable action, simple operation, low failure rate and easy cleaning and maintenance. It is a good helper for your production.

Shaanxi Nick Machinery Co., Ltd. is a leading manufacturer and after-sales service provider of straw baler and straw silage baler equipment in China. It is an enterprise with independent intellectual property right

2020-08-19

The electrical control part of the waste paper baler is mainly composed of PLC, motor, relay and switch electrical components. Among these parts, the most vulnerable part is the motor and electrical components. Daily precautions for the packaging electrical control box:

1. Pay attention to the grounding, lightning protection, rain protection and moisture protection of the power cord.
2. Non-professional operators of the electric control cabinet are prohibited from using it.
3. Pay attention to the anti-freezing work of the motor and the long-term overload of the motor. Effective prevention of these two can greatly reduce the damage of the motor, thereby maintaining the normal packaging of the waste paper baler.

4. Pay attention to the button operation of the console. Don't use excessive force on the switch button, and prevent misoperation to avoid short-circuit damage.

The Nick brand waste paper baler is simple to operate and automatically discharges the bale, which improves work efficiency. The installation of emergency stop settings makes the operation safer and perfect after-sales.

Shaanxi Nick Mechanical Equipment Factory specializes in the production of waste plastic balers. The advantages of waste plastic balers can be manifested in many ways. Products that can inspire customer interest can be better accepted.

2020-08-19

Waste paper baler is a mechatronics product, mainly composed of mechanical system, control system, feeding system and power system. The whole packing process consists of auxiliary time such as pressing, returning, carrying, transferring, outgoing up, outgoing down, and receiving. This product has the characteristics of good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, and low investment cost of equipment basic engineering.

 It is widely used in all kinds of waste paper factories, old waste recycling companies and other units and enterprises. It is suitable for packaging and recycling old waste paper, plastic straw, etc. It is a good equipment to reduce labor intensity, save manpower, and reduce transportation costs. The Nick brand waste paper baler is easy to operate, high in safety, automatic out of the package, and more efficient. It is your best choice.

2020-08-19

It is specially used for the recovery, compression and packing of waste paper, waste cardboard, leftovers from carton factories, waste books, waste magazines, plastic film, straw and other loose materials.

Fully automatic hydraulic baler is a mechatronic product, mainly composed of mechanical system, control system, feeding system and power system. The whole process is composed of auxiliary time such as pressing, returning, transporting, rotating, ascending, descending, and receiving. The waste paper packaging machine has the characteristics of rigidity, toughness, good stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. The baler is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. This machine adopts hydraulic transmission, compact structure, convenient movement and installation, simple operation, convenient maintenance, reliable sealing, and no foot screws are used during installation. Users can determine the packaging specifications and dimensions according to their needs, and to a large extent cooperate with transportation or storage. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs.

Nick Baler Company is a professional company engaged in the development, production, sales and service of hydraulic machinery and packaging machinery. It is your best choice to build professionalism with concentration, reputation with integrity, and sales with service.for more information ,you can contact us :www.nkbaler.net 

2020-08-19