1. The switching power supply is connected incorrectly. Generally speaking, if there is noise in the new equipment, most of them will be caused by the wrong wire connection. If the wire is wrong, the motor will be turned over, and the noise will be quite large. The customer only needs to replace any two wires in the switching power supply.
2. Grinding chain cover of transmission chain. The waste paper baler will often deform the chain cover due to an accidental impact of the hanging object during transportation or application. Once the deformation occurs, the transmission chain will wear the chain cover, which will also cause a certain amount of noise.

3. Common motor faults.

When the small horizontal waste paper box baler is not used, be sure to unplug the power plug from the power socket. The switching power supply was cut off to prevent electric shock or fire accident caused by power failure. When the heating plate is at a very high temperature, do not put flammable objects around the back of the device, there is a risk of fire accident. Please be sure to carry out actual operations in accordance with regulations.

Shaanxi Nick machinery equipment can supply many kinds of baler machine 
Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-12

It has high polymer dispersion, high electrical conductivity, stable performance, high mechanical strength, good temperature resistance, high concentration resistance and hydrolysis resistance.
It can be automatically disassembled to facilitate inspection and installation of tools and materials. The circuit and control system of the hydraulic baler used in the baler are very simple. It must be used under certain environmental conditions. The original road board can be removed under the set conditions. In good condition.

1. Advantages: Crush the straw into fine sand from the source. It can be used in many places, such as reservoirs, coastal areas, etc., providing drying equipment, which can be used for production in forests, rice fields, nurseries, houses, etc. Using sulfide as fuel, stacking equipment, low noise, clean and sanitary. It saves space and occupies less area, and is easy to repair and maintain. Under certain conditions, a restaurant and kitchen waste landfill can even be formed around the reservoir, which can be used for secondary treatment of the environment, reducing investment and pollution.Shaanxi Nick machinery equipment can supply many kinds of baler machine

Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-11

Proper use of machinery and equipment, careful implementation of the protection and maintenance system and strict compliance with safe operating procedures are necessary conditions for extending the operating life of the straw baler, improving production efficiency and ensuring production.
To this end, it is advocated that users establish protection and maintenance systems and safe operating procedures. In addition to understanding the machine structure and operating procedures, operators must also pay attention to the following points:
1. The straw baler should smooth the smooth parts of the machine as required.
2. Clean up the sundries in the bin after work every day and keep the equipment clean and tidy.
3. The manufacturer of straw baler reminds that those who do not understand the structure, performance and operation rules of the machine without learning should not start the machine in private.
4. When severe oil leakage or abnormal phenomena occur during work, stop the vehicle immediately, analyze the cause and eliminate the fault, and do not force it to run with disease.
5. The oil tank should be cleaned and replaced with new oil once every six months, but the oil should not be filtered for more than one month in the second cleaning. The new oil used once is allowed to be used again after strict filtration.

6. The oil added to the oil tank must be rigorously filtered, and should always adhere to a sufficient amount of oil. If there is a shortage, the oil should be added immediately. The straw baler is filled with smooth oil every 1.5 hours, and 5 to 6 times less smooth oil is added to each smooth part of each shift (8 hours).

Shaanxi Nick machinery equipment can supply many kinds of baler machine

Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-11

For mechanical and electrical equipment, automation, intelligence, and unitization make the design thoughtful, and its important parts must be considered. The service life of each product is determined by a core component, and that core component is often a valuable one. For example, the core component of the baler is the movement; the core component of the sealing machine is the motor; the core component of the heat shrink machine is the furnace; the production of the winding machine has been modularized, and the core component is in each module. The core component of the vacuum packaging machine is the vacuum pump. Most small vacuum packaging machines now use rotary vane vacuum pumps.

The hydraulic baler adopts PLC control, which can realize the functions of automatic compression, automatic lifting, automatic turning and automatic packaging. And can monitor the production process in real time, complete the functions of automatic diagnosis, automatic alarm and data upload. The successful application of the hydraulic baler control system reduces the work intensity of the operator, improves the operating efficiency and safety of the equipment, reduces the energy consumption, and improves the product quality. The characteristics of the metal baler are as follows:
1. It has the characteristics of small volume, light weight, low motion inertia, low noise, smooth movement and flexible operation.
2. It adopts integrated hydraulic and electric control, which is simple and convenient to use, can stop and run at any working position, and is easy to realize overload protection.

3. It has a wide range of applications. It can be used as a processing equipment for packaging waste plastic film, and can also be used as a processing equipment for packaging and compacting similar products.

for more information ,please visit us : www.nkbaler.com  or whatsapp us :+86 15021631102 

2020-05-09

Semi-automatic waste paper Baler manufacturers: in the waste paper recycling industry, some have strict requirements on the specifications of the waste paper after packaging, and the size of the package block is required. In the process of compressing and packaging the recovered waste paper, we must control the package block The size of the length, width and height. The waste paper Baler is used to squeeze the waste paper and similar products under normal conditions, and pack it with special packaging tape to form it, which greatly reduces its volume, so as to achieve the purpose of reducing transportation volume, saving freight, and increasing benefits for enterprises. The semi-automatic waste paper Baler manufacturer introduced advanced technology and advanced technology of similar products at home and abroad. The waste paper Baler can do this, and the overall appearance of the package can be achieved, and the waste paper can benefit.
  In the original semi-automatic waste paper Baler equipment, the length of the bag was manually controlled. Control visually so that the length of the package cannot be used. If the length is similar, this problem can be ignored. In order to accurately control the length of the package. Our company added a meter counter design to the semi-automatic baler, and set the length of the package through the program. When the package reaches the set length. The packaging machine will stop automatically, and the subsequent packaging work will continue after the rope is tied.as more information ,please visit us : www.nkbaler.net

2020-04-27