The waste paper baler is used in the recycling station to pack some waste paper boxes, cotton, plastic bottles, etc.
Especially this year’s rising prices of waste paper have given many customers the idea of ??buying a waste paper baler. Customers who have bought a baler may not pay attention to the maintenance of machine parts.
So that sometimes the parts are broken and cannot be repaired. Here is how to extend the service life of the heating strip of the waste paper baler.
When the waste cardboard baler works, it is ventilated first and then energized, and when it is shut down, the power is turned off and then the gas is turned off. Frequently check the decompression, filtration, and oil mist triple parts to ensure that there is oil (sewing machine oil) in the oil mist and the oil cup, and there is no water in the filter cup.

The heating strips and silicone strips should be kept clean, and no foreign matter should be stuck, so as not to affect the sealing quality. The back cover of the waste cardboard baler should be opened after working continuously for 2-3 months.

Add lubricating oil to the sliding parts and switch bumps, and lubricate all the connecting activities on the heating rod according to the usage. It is strictly forbidden to put your hands under the heating rod to prevent injury. In case of emergency, immediately cut off the power.
On the heating rod, the second layer of adhesive paste under the heating plate serves as insulation. When it is damaged, it should be replaced in time to avoid short circuit. The user prepares the working air source and inflation air source, the working pressure of the waste cardboard baler has been set to 0.3MPa,
It is more appropriate. Don't adjust too much without special circumstances. The waste cardboard baler is not allowed to be tilted or bumped during the handling process, and it cannot be placed down for handling. To ensure the normal operation of the vacuum pump for the waste cardboard baler,
The vacuum pump motor is not allowed to reverse. The oil level should be checked frequently. The normal oil level is 1/2-3/4 of the oil window (not exceeded). When there is water in the vacuum pump or the oil color turns black,
At this time, new oil should be replaced (generally, it should be replaced once every one or two months of continuous work, and 1# vacuum gasoline or 30# gasoline or engine oil can also be used).
The above is the small knowledge points of the waste paper baler explained by Nick Machinery today. If you have any questions, please feel free to contact us www.nkbaler.com.

2020-12-13

The straw baler is a high-quality equipment that compresses and packs corn stalks, wheat straws, bean stalks and other crop straw wastes and branches and other raw materials for more convenient storage, and returns the straws to work and reuse.
The straw baler can pack many raw materials, not only for corn stalks, but also for other types of crops.
This processing feature of our straw baler is suitable for all crops, and we can pack and classify them, so as to maximize the value of agricultural production.

At the same time, it can also greatly reduce the burden of transportation, effectively save the capital consumption of the enterprise, and greatly save the manpower.

The main advantage of the straw baler is: the bag is compact, neat and beautiful, so that the straw bales that can be packed can greatly reduce the transportation cost.
Therefore, it can be widely used as a common production tool in cotton producing areas, textile companies, paper companies, and waste material recycling companies.
 The current straw baler has gradually penetrated into various fields of agricultural processing. We know that the main component of straw waste is the cell wall of plants.
Its main ingredient is a large amount of crude fiber, which also contains a small amount of protein, crude fat, ash and a small amount of other ingredients.
Therefore, the key issue of straw treatment and utilization is that the wood fiber flocs in crop straws can be effectively decomposed.
From the perspective of the nutritional characteristics of crop residues, the content of protein, soluble carbohydrates, minerals, and carotene is relatively low, but the content of crude fiber is relatively high, so it is not suitable for raising livestock.
The full-automatic straw hydraulic baler produced by Nick Machinery is constantly striving to innovate and develop, and produce suitable intelligent straw baler for major production enterprises. Welcome to our website www.nkbaler.com to purchase.

2020-12-13

The reliability of the hydraulic system of the waste paper baler depends to a large extent on the seal design of the hydraulic system of the waste paper baler and the choice of seals.
Due to the unreasonable selection of the sealing structure in the design, the selection of the seals does not conform to the specifications, and the compatibility of hydraulic oil and sealing materials, load conditions, ultimate pressure, working speed, and changes in ambient temperature are not considered in the design.

These all directly or indirectly cause hydraulic system leakage to varying degrees.

In addition, due to the dust and impurities in the use environment of the waste paper baler design, suitable dust-proof seals should be selected in the design to prevent dust and other dirt from entering the system to damage the seals and contaminate the oil, thereby causing leakage.

1. The design precision of waste paper baler should be reasonable. In the design, the geometric accuracy and roughness of the moving surface of the waste paper baler must be ensured. In the design, it is necessary to check the strength of the connection part, and the high-precision and reasonable design requirements can ensure that the waste paper baler can avoid leakage during the work.

2. The oil cylinder seals of the waste paper baler are made of oil-resistant rubber and other materials. The aging, cracks, and damage caused by long-term use will cause system leakage.
If the parts are damaged by collision during the working process, the sealing element will be scratched, which can cause leakage of the waste paper baler in severe cases.
Nick Machinery is a fast-growing, mature and stable enterprise, specializing in waste paper balers for many years. In order to be able to worry about customers, it actively absorbs advanced experience and high-tech achievements to innovate independently.
Welcome to our website for detailed instructions www.nkbaler.com

2020-12-11

Plastic bags and plastic films are one of the most "bad" waste materials in the waste recycling industry. For example: bubble bags, packaging materials, zipper bags, garbage bags, tarps, cling film, cereal box liners, shopping bags, porous plastic file covers containing newspapers, etc.

The reason why these materials are "not good" is that they have a problem that they cannot be decomposed by organisms. They are broken down into small particles by light. Small particles will pollute the soil and water, and it is difficult and expensive to dispose of.
So strong measures have been taken to recycle such materials around the world. This not only protects the environment, but also benefits economic growth.

It is estimated that in the process of incineration and landfill, recycling of plastic bags and plastic films can create six to ten times more jobs.

The recycling of these materials creates a need for compression balers, because if compression and baling are not carried out, these waste materials are not convenient to transport.
Nick Machinery has many different types of balers suitable for plastic film, such as semi-automatic horizontal machines, automatic horizontal machines, vertical balers, and multi-functional vertical machines.
You can choose our appropriate standard machine according to your specific packaging requirements, such as the amount of materials, or the size of the workshop space.
Nick Machinery can also customize the machine according to your requirements. Please contact Nick Machinery first to inform the specific packaging requirements. We will recommend the best solution to you according to your specific requirements. www.nkbaler.com

2020-12-11

The NK080T80 series plastic bottle Baler Press machine produced by Nick Machinery is specially used for the compression and Baler Press of hollow plastics such as cans, PET cola bottles, oil bottles and so on.

Hollow plastics are widely used in daily life, such as PET bottles, PP tanks, PVC pipes, hoses, water pipes and so on. This also makes hollow plastic the material with the highest recovery rate.
According to Petcore (the European trade association that promotes the collection and recycling of PET), in Europe alone, 1.45 million tons of PET bottles were recycled in 2010, accounting for 48.3% of all types of recycled bottles that year, of which 475 million were bundled into bales And export.
This is a huge recycling project. PET, PP and PVC containers are collected and sent to the recycling center. After screening, other materials (such as metal) are removed, and then compressed into bales by a baler. Regular and compact bales greatly increase the efficiency and convenience of the warehousing and logistics process.

Nick Machinery manufactures a series of balers suitable for compressing and packaging waste hollow plastics. The long-stroke baler of Nick Machinery is specially designed for Baler Press hollow plastics. It can produce bale sizes of 1500*760*1000mm and a bale weight of 350kg.

In addition, other sizes and compression models are available. For hollow plastics, the compression ratio can be as high as 96%, and the appropriate size and weight of the bale make the storage and logistics process more rapid and convenient, and maximize recycling benefits.
We will further establish the quality awareness of "produce a product, establish a monument", and do the most convincing publicity based on the actual performance and integrity of the product. Welcome to visit www.nkbaler.com.

2020-12-08