1. The direct influencing factors of the production efficiency of the automatic waste paper baler: the model and specifications of the baler, the output varies from model to model, and the difference in specifications directly determines the production efficiency of the baler. The production efficiency of the fully automatic waste paper baler is higher than that of the baler with a door at the discharge port;
2. The production of horizontal waste paper baler is inseparable from the performance of the cylinder of the baler. The performance of the cylinder determines the stability of the baler. To ensure the production performance of the baler, you must choose a baler manufacturer with exquisite cylinder production technology;
3. The quality of the hydraulic oil selected for the baler equipment, the quality of the hydraulic oil directly determines whether the cylinder can play a large role, but also directly affects the failure rate and service life of the cylinder. To ensure that the baler production must use high-quality 46 anti-wear hydraulic oil;

4. The operation convenience, control performance and low failure rate of the hydraulic waste paper baler control system also determine the baling operation efficiency of the baler.

 The emergence of waste paper balers can meet the demand for energy conservation, and can provide more efficient resource services for the operation of agricultural and sideline products processing industries. www.nkbaler.net

2021-09-22

Nick Machinery brand baler has the characteristics of small size, light weight, low movement inertia, low noise, stable movement and flexible operation.
It has a wide range of applications, not only as a waste paper packaging equipment, but also as a processing equipment for packaging and compacting similar products;
The floating necking design in the left, right and upper directions of the hydraulic baler is conducive to the automatic distribution of pressure on all sides. It can be widely used for the Baler of different materials, automatic bundling, and improve the Baler speed. The spherical surface is used between the pusher cylinder and the pusher head. Structural connection

Good reliability, long oil seal service life, low-noise hydraulic circuit design, which can reduce failures. The pusher cylinder and the pusher head are connected by a spherical structure, which has good reliability and long oil seal service life. Nick Machinery uses buttons to operate and control. Safe and reliable.

Choosing Nick Machinery hydraulic baler, independent hydraulic system, servo system control, is the best choice to help you solve and recycle waste. www.nkbaler.net 

2021-09-18

1. The frame structure is solid, and the material of "Baosteel" is selected as the structure of the machine;
2. Years of design and production experience, large output and high efficiency;
3. Double-button bag delivery design, the compressed bag can be turned out without hurting the operator;
4. Comes with weighing and metering to control the weight of each package to be consistent;

5. Electric button control, integrated circuit board control, one-key operation is completed.

Nick mechanical bagging machine is operated by one button, compressing, unBaler and bagging can complete the whole process continuously at one time, which improves the convenience of operation and production efficiency. www.nkbaler.net

2021-09-18

In recent years, as countries around the world have paid more and more attention to sustainable development, circular economy has also attracted more and more attention from the public. Among them, the recycling of mineral resources has always been a hot area due to their non-renewability. The recycling of cans can not only save bauxite, but also save 97% of energy. It has a great contribution to the protection and beautification of the global environment. So what are the recycling advantages of waste cans after export? Now Nick will take you to explain it.
1. In the field of utilization of aluminum cans
From the perspective of the use of aluminum cans, Sweden’s recycling model is the most scientific. It has realized the recycling of aluminum cans and greatly increased its utilization rate; compared with the United States, the operating model is slightly inferior in this link. , There is no guarantee that the original aluminum alloy can be produced directly by smelting the original waste cans, and it needs to be modulated by the metal composition to produce the aluminum that meets the requirements.
2. In the field of can recycling
After comparative analysis, the cycle (tanning→canning→canning→user→recycling of waste cans→waste) in the United States is the shortest, with an average of 90 days. Such a fast recycling rate has made the United States the most expensive return; and China And the Swedish recycling model has the characteristics of complex recycling links and multiple levels. When scrap aluminum circulates between different levels, there will be a certain length of time interval. The growth of the recycling chain extends the recycling time of aluminum cans and reduces its utilization efficiency. In the case of a certain market capacity of cans, if the recycling time is shortened, the use rate of cans can be reduced, and the efficiency of resource utilization can be greatly improved.
3. In the field of recycling organizers

Both Sweden and the United States are involved in the recycling of cans, and the recycling process is handled by more formal companies. It is easier for the government to supervise and participate. In many cases, the can recyclers appear in the public market as a role similar to the government. 

The can Baler produced by Nick Machinery produces clean and beautiful bales, which is convenient for transportation, suitable for container transportation, and greatly reduces transportation costs.www.nkbaler.net

2021-09-17

Hydraulic station, also known as hydraulic pump station, is an independent hydraulic device. It supplies oil according to the gradual requirements. It also controls the direction, pressure and flow of the hydraulic oil flow, which is suitable for various hydraulic machinery where the main engine and the hydraulic device can be separated. After the user purchases, as long as the hydraulic station is connected to the actuator (cylinder or oil motor) on the host with an oil pipe, the hydraulic machine can realize various prescribed actions and working cycles.
The hydraulic station is a combination of pump device, integrated block or valve combination, oil tank, and electrical box. The functions of each component are:
Pump device-equipped with a motor and an oil pump, it is the power source of the hydraulic station, which converts the mechanical energy into the pressure energy of the hydraulic oil.
Manifold-assembled by hydraulic valve and channel body. Adjust the direction, pressure and flow of hydraulic oil.
Valve combination-The plate valve is installed on the vertical plate, and the pipe behind the plate is connected, which has the same function as the manifold.
Oil tank-a plate-welded semi-closed container, which is also equipped with an oil filter, an air filter, etc., used for oil storage, oil cooling and filtration.
Electrical box-divided into two types. One is a terminal board with external leads; the other is equipped with a full set of control appliances.

The working principle of the hydraulic station: the motor drives the oil pump to rotate, and the pump sucks oil from the tank to supply oil, and converts mechanical energy into pressure energy of the hydraulic station. Connect the pipeline to the oil cylinder or oil motor of the hydraulic machinery to control the change of the direction of the hydraulic motor, the size of the force and the speed of the speed, and promote the work of various hydraulic machinery.

NKBALER is an enterprise specializing in the production of hydraulic machinery and accessories, allowing you to buy one-stop, worry-free after-sales. Welcome to buy: www.nkbaler.net

2021-09-17