For waste paper recycling stations, large quantities of waste paper must be recycled every day, and waste paper needs to be transported regularly.
Using a waste paper baler to pack a large amount of waste paper, and then transport it, not only can reduce the number of transportation, but also increase the transportation volume and save transportation costs.
NICKBALER introduces here in detail the application scope and precautions of the one-way valve, an important hydraulic component of the automatic waste paper baler.
1. Applicable environment
In the hydraulic system of the automatic waste paper baler, the one-way valve is widely used, and is often used at the outlet of the hydraulic pump to prevent the hydraulic oil from flowing back; it is used to isolate the connection between the oil circuits to prevent the oil circuits from interfering with each other; Used as a back pressure valve; used as a bypass valve.
2. Precautions for selection and use:
When selecting a one-way valve, in addition to selecting the opening pressure reasonably according to your needs, you should also pay attention to the operation. When the flow through the one-way valve is much smaller than the rated flow, the one-way valve sometimes vibrates. The smaller the flow, the greater the opening pressure. High, the more gas in the oil, the easier it is to produce vibration.

Recognize the direction of the inlet and outlet when assembling, and do not install it wrong to prevent it from affecting the normal operation of the operating system. It is mainly the outlet of the pump to assemble the check valve. If the inlet and outlet of the check valve are installed reversely, the hydraulic pressure may be damaged. Pump or burn out motor.

The NICKBALER waste paper baler has reliable performance, convenient operation and simple maintenance. Diesel engines can be used for power where there is no power supply. www.nkbaler.net