Under normal circumstances, the manufacturer of the hydraulic baler will debug it when shipping the hydraulic baler, and send the whole machine to the customer to avoid unnecessary troubles caused by the customer's own assembly and installation. Even if the manufacturer of the hydraulic baler has provided such convenience, users still need to pay attention to some common matters when using the equipment to avoid unnecessary damage to the equipment. The following is an introduction to the instructions for users of the hydraulic baler :
1. Read the instruction manual first. This job is required by many equipment, but it is ignored by many customers. The manual of the hydraulic baler contains a lot of correct operation and control methods of the hydraulic baler and simple troubleshooting methods. The operation for the user is Very helpful.

2. Connect the power supply correctly. At present, the hydraulic baler provided in the domestic market mainly has two power sources, one is 380v and the other is 220v. Users of these two power sources should first determine before using the hydraulic baler, and then connect them.

Here, Nick Machinery recommends that you must be prepared before use and operate in strict accordance with the operating instructions, which can effectively extend the service life of the baler. For more information, please consult www.nkbaler.net

2021-08-31

How to change the status quo of the hydraulic packaging machinery industry and promote the development of hydraulic packaging machinery, the industry should pay attention to the development trend of hydraulic packaging machinery while making great strides. With the development of industry, the natural environment is gradually deteriorating. For example, global warming is an indisputable fact. The main reason for this phenomenon is excessive carbon dioxide emissions. Therefore, the Copenhagen World Climate Conference called on all countries to take responsibility, and the national government promised to reduce unit carbon emissions by 40%-50% before 2021. This means that all industries in my country must have this sense of social responsibility and act for low carbon.

At present, under the premise that the hydraulic baler industry develops from time to time, it can be seen that there are many contradictions in the hydraulic baler industry. The company has no way to cope with changes in the situation. The industry development ideas and concepts are not compatible with the development of the situation; technological innovation capabilities are weak, and process technology advances Slow, new product development has not fundamentally freed from the situation of imitation research tracking, competitiveness is not strong, economic growth and benefit enhancement are still mainly driven by scale. In addition, there are still some hydraulic packaging machinery companies with extensive management, and fine management has not yet been realized; market awareness, awareness of competition, awareness of dangers, awareness of serving the market, customer service, and sense of urgency and responsibility for development are not strong. Some hydraulic packaging machinery The phenomenon of incompatibility between the enterprise's understanding and use of people and the laws of market economy. In the face of favorable factors, it is the most urgent to change the development methods of various enterprises in the hydraulic packaging machinery industry. Enterprises must stand on a new starting point to examine and solve the above contradictions and problems, change development concepts, strengthen independent innovation, and enhance market awareness , Vigorously promote the development of domestic hydraulic packaging machinery industry.

Nick Machinery specializes in hydraulic baler for many years, and actively absorbs advanced experience and independent innovation of high-tech achievements. Tailor-made hydraulic balers suitable for local factors for enterprises.www.nkbaler.net

2021-08-31

When it comes to second-hand metal chip briquetting equipment, everyone's first feeling is: unreliable quality, unguaranteed service, unreliable and other words, is this really the case? As a professional metal chip briquetting machine manufacturer, we can only say that it is not necessary. For those who do not understand, it is recommended to buy brand new equipment. For those who understand the equipment, they need to be cautious. Below we will introduce the hidden problems of the second-hand metal chip briquetting machine.
1. Equipment quality: As the second-hand metal chip briquetting machine has been used for a period of time, it is impossible to determine whether the hydraulic components such as the equipment cylinder, hydraulic pump, and hydraulic valve are worn or damaged. If you buy it and use it for a period of time, it may malfunction, and the maintenance cost is very high. High and requires professionals. It is recommended that professionals check the usage when purchasing, and then decide whether to purchase.
2. Equipment price: As there are more manufacturers of metal chip briquetting machines in my country, and there are no special regulations on equipment prices, the price of second-hand equipment is even more difficult to say. When buying, you should find professionals in this area. According to the service life and use of the equipment The situation determines an approximate price.
3. Equipment service: The metal chip briquetting machine is a kind of hydraulic press equipment, which is a new equipment in recent years. It needs professional skills to operate it, and it needs regular maintenance in the later period. The purchase of second-hand equipment, installation, commissioning, and technical training all need to be solved by the customer, and there is no guarantee for repair or replacement of parts if failure occurs later. It is recommended to find the manufacturer and explain the situation. The manufacturer will generally provide paid services.
4. Benefit protection: The purchase of second-hand metal chip briquetting machine is not guaranteed. No matter any problems in the future, the buyer needs to bear it. It is possible that the equipment you spend tens of thousands of dollars to buy is just a pile of scrap iron.
5. In terms of normal production time: The equipment needs to be disassembled, transported to the customer site, and then installed and debugged. It usually takes 15-30 days, while the new equipment can be produced normally in only 3-4 days.

Second-hand metal chip briquetting machine is not impossible to buy, but you need to understand the equipment and have professionals. Many second-hand metal chip briquetting machines with guaranteed quality and good maintenance are still available for purchase. Although the price of second-hand equipment is lower than that of new ones, it is recommended that you buy brand new ones for long-term and later investment considerations.

Nick Machinery's metal briquetting machine has guaranteed quality, reasonable price, and perfect after-sales service. Welcome to buy www.nkbaler.net

2021-08-31

We all know that the quality of metal chip briquetting machine is very important. It affects equipment performance and customer experience. There are many domestic manufacturers, but there are few manufacturers with guaranteed equipment quality. As a professional metal chip briquetting machine manufacturer Business, let’s introduce how to improve the quality of equipment.
After summarizing, the factors that affect the quality of the metal chip briquetting machine are: the manufacturer's technical strength, processing capacity, quality management system, after-sales service quality and company management philosophy.
The technical strength of the manufacturer determines whether the design of the metal chip briquetting machine is reasonable, especially the hydraulic system, which affects the stability and service life of the equipment. Manufacturers are required to have a certain technical foundation and innovation ability, and can give a reasonable design plan to the requirements of customers; after the plan is formulated, it is processing and assembly. Many parts require precision processing, otherwise it will affect the performance of the equipment; There must be a strict quality control system in the production process, which requires the quality supervision department to strictly control the quality; after the equipment is shipped to the customer site, the manufacturer must provide after-sales service so that customers who do not understand can operate the equipment normally; It will also affect the quality of the metal chip briquetting machine, which determines the attitude and mentality of the manufacturer to produce the equipment.

Everyone wants to buy high-quality equipment. Only high-quality metal chip briquetting machine manufacturers can occupy the market for a long time and win the trust of customers. As long as the above points are followed, there should be no big problem.

Nick Machinery adheres to the enterprise spirit of "integrity, quality, innovation, and service" and the service concept of "integrity-based, customer first", and continues to create more value for customers. "Be honest, do things down-to-earth" and win-win cooperation with customers www.nkbaler.net

2021-08-31

The briquetting machine is a kind of domestic advanced mechanical equipment, which presses various plastic raw materials to form the equipment. The pressure transmission method of the briquetting machine includes mechanical transmission and fluid transmission. We mainly talk about hydraulic oil here. Hydraulic equipment that drives power for working media.
At present, the sources of metal scraps are very wide. When processing iron scraps, aluminum scraps, copper scraps and other materials, a large amount of scrap metal scraps will be generated. People often ignore the renewable utilization of these scraps and slag as garbage disposal, which not only causes It wastes resources, and at the same time severely infects the atmosphere, causing harmful effects. The metal briquetting machine is mainly used to press various metal scraps, powdery granular metal powder, smelting additives, sponge iron, etc. into high-density cylindrical cakes without adding any binders. The density of the cakes can reach 5T/ Above M3, the pressed cake can be directly used in the furnace, and the cast iron grade can reach HT200-250, and the cost of each ton of casting can be saved about 700 yuan. The metal chip briquetting machine is a new type of hydraulic briquetting machine equipment. This equipment can process the waste slag and press it into a high-pressure molding. It not only effectively improves the renewable utilization of scrap metal slag, but also makes it convenient to press the molded block. Storage, transportation and use reduce the loss during transportation.

The briquetting machine has a reasonable structure design and a small footprint. It is a good helper for processing scrap metal scraps. It has hydraulic system control, high molding pressure, high automation, high efficiency, large quantity and good quality. It has been widely used at present. The industry has an effective effect on various plastic materials.

Nick Machinery can help you choose the most suitable waste recycling solution. Welcome to visit our company website www.nkbaler.net

2021-08-31