Gantry shears, hydraulic shears
NKBALER gantry shears are hydraulically driven. Compared with mechanical transmission shears, they have the characteristics of small size, light weight, low movement inertia, low noise, smooth movement, flexible operation and large cutting section.
Hydraulic and electric integrated control, single and continuous action conversion can be implemented, simple and convenient to use, can be stopped and run at any working position, and easy to realize overload protection.
It has a wide range of applications. It can be used as processing equipment for metal recycling and processing units, as well as furnace charge processing in factory foundries and metal cutting processing equipment in the mechanical construction industry.

The length of the working blade of the gantry shear: 800mm, 1000mm, 1200mm, 1400mm, 1500mm, 1800mm, the larger can reach 2200mm; the shear force is from 300 tons to 1200 tons, suitable for users with different scales and different requirements.

The equipment adopts an integrally welded solid open structure, which can maintain sufficient rigidity of the fuselage and at the same time have a more convenient operating space;
The press-fitting stroke of this series of presses is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold;
It is suitable for blanking, bending, flanging, sheet drawing, fine blanking, and cold extrusion of metal parts;
Adjustable pressing force, no overload, realizing the pressure holding requirements of each working step in the pressing process;
The lifting height of the press-fit spindle can be adjusted within any range of travel by a timer or position sensor;
Low oil pump displacement, low motor power, power saving and energy saving;
Centralized button, with manual, semi-automatic and automatic three operations;
The hydraulic system meter is built in the frame, and the appearance is neat, light and stable;
Optional: install photoelectric protection device, automatic lubrication device, oil temperature cooling constant temperature device.
NKABLER is a professional shearing machine manufacturer, welcome to visit our company website www.nkbaler.com for consultation.

2022-03-10

Hydraulic baler, horizontal baler, plastic baler
The hydraulic baler uses the basic premise of the driving force of the four-column hydraulic press. According to the driving force caused by the hydraulic cylinder or the motor of the four-column hydraulic press, the electronic components of the mechanical equipment are transformed into a larger driving force to convert the goods into blocks.
The reduction of cargo capacity makes it beneficial to packaging, cost-saving transportation, and utilization rate, which is becoming more and more green and environmentally friendly. Because of it, it is now widely used in the entire industry chain such as waste printing paper purchase plants, plastic recycling plants, and agricultural and livestock industries.
1. For soft goods, the hydraulic Baler machine can reduce the size of fabrics, waste picture printing, clothing and other woven fabrics, so that its capacity is reduced. In a certain transportation interior space design scheme, it can put a lot of goods, thus Ensure to reduce the number of transportation, save transportation costs, and increase economic benefits for the enterprise.

2. The main purpose of the hydraulic baler can be used in a variety of ways, such as waste plastic plastic film, waste plastic agricultural film, plastic greenhouse film, plastic bottles, waste picture printing, waste old cardboard boxes, clothes and pants, etc. It is possible to reduce the goods occupying the ground and process the stamped parts into a small piece,

3. The hydraulic baler is a special industrial equipment for packaging packaging bags, waste picture printing, packaging bags, packaging bags, pure cotton yarn, fabrics, etc. Not only can it be used in industrially developed woven bag factories and waste printing paper purchase factories, but it is also more applicable to the general large and small hand-knitting industries. This machine has the advantages of reasonable layout, simple operation steps and cost saving, and has the advantages of high pressure, compact package, time saving and time saving.
NKBALER is a manufacturer specializing in the production of hydraulic balers, with simple structure, convenient operation and a wide range of applications. For more details, please consult our sales staff 86-29-86031588

2022-03-10

Waste cardboard baler, hydraulic baler, waste paper baler
1. Check the operation status of the pump. If the large and small automatic balers are noisy and the temperature is too high, the pump is likely to be damaged more severely.
2. Master the operation of the pump. Comparing the temperature of the pump body and the fuel tank, if the temperature difference between the two is more than 5℃, the pump can be considered to be more damaged.

3. Check the oil leakage of the pump shaft and the joints, and pay attention to the leakage when the temperature is high and the pressure is high.

4. Observe the sign value of the negative pressure gauge installed at the suction pipe of the pump. When everything is in normal operation, its value should be below 127mmhg; otherwise, check the large and small automatic Baler oil filter and the working oil. A small amount of acetylene gas has been invaded in the oil of the automatic baler, and chemical fiber bubbles can be found in the fuel tank of the car. If a lot of acetylene gas is invaded in the system software, a lot of bubbles will occur in the automobile fuel tank.
At this time, the engine oil is very prone to mildew and cannot be used. In addition, common problems such as vibration, noise, fluctuations in working pressure, instability in the work of construction machinery parts, and destructive commutation caused by moving preforms, and prohibition of positioning, etc. occur in the hydraulic pressure of the automatic baler industrial equipment.
NKBALER recommends that you do a good job of daily maintenance and maintenance of the hydraulic baler, which can effectively extend the service life of the baler. If you want to learn more, please pay attention to www.nkbaler.net

2022-03-10

The progress of the times and economic development have given us more protection for our lives. I believe that in the years to come, we will make better contributions. The development of the corncob briquetting machine is the requirement of the times, and it is also in the new era. The corncob briquetting machine knows how to better show its strength, serve the market, and be valued by the market. The corncob briquetting machine has excellent Baler tightness, few failures, convenient maintenance and fast packaging speed, which better highlights its strength and shows its own value. In the new era, the corncob briquette must be done well. I need to show my charm better.
The support of the market is the guarantee for the progress of the corncob briquetting machine. The demand of the market has given more development opportunities for the corncob briquetting machine. It is precisely this way that we even more believe that the efforts of the corncob briquetting machine are important. The motor of the corncob briquetting machine stops immediately after the packaging is finished. It is power-saving and practical, and the appearance design is simple and beautiful. The advanced technology and advanced skills all give the corncob briquetting machine more innovation opportunities. The efforts of the corncob briquetting machine are the requirements of the times, and it is also the basis for the corncob briquetting machine to adhere to the dream in the new era. The corncob briquetting machine insists on being independent and unremittingly innovating. It is the requirement of the times for the corncob briquetting machine to dedicate its strength. It is also in the new era that the corncob briquetting machine must do better.
NKBAKER specializes in providing corncob balers, corncob briquetting machines, etc. Contact number 86-29-86031588, looking forward to long-term cooperation with you.

2022-02-05

In the factory workshop, what we consider most is how to clean and maintain the equipment daily.
The same is true for Indian waste paper baler products. Correct maintenance and use procedures can extend the service life of the baler. This can also reduce the occurrence of steps and improve the efficiency of the enterprise.
Today we will tell you some important steps in cleaning.
1. Dust of equipment. Some investigators and maintenance personnel reported that a large part of the machine failures were caused by the failure to clean up the dust of the equipment, which caused the equipment to fail to operate normally. So cleaning up the dust is very important for the machine.
2. We also need to maintain the connection and transmission parts of the machine, mainly to lubricate the parts to make the machine work better. Because people may not pay attention to these aspects in the process of use. The equipment administrator did not have time to maintain the equipment and caused the equipment failure.

3. The user does not care, although there is no clear specification, but the user needs to operate the specification when using it. Read more and understand the manual, do not solve the fault by yourself, please ask professional personnel.

Daily maintenance of the hydraulic baler can effectively extend the service life of the baler and make the baler work better for you.

2022-01-12