5. The design of the introduced double-tough cutter greatly improves the paper cutting efficiency and prolongs the service life of the blade.
4. Finished product out of package: When the material is compressed to a suitable height, after the material is pressed tightly by the pressing plate, the motor is stopped. At this time, the operator should stand on the column at a 45-degree angle and pull the lock guard. The door will automatically pop out when the compressed material is pushed outward, so the operator cannot stand in front of the door when opening the door. So as to avoid accidents. After opening the door, tie the bag through the rope opening between the upper and lower pressure plates. After binding the bag, resume the motor operation, pull up the handle of the reversing valve to raise the pressure plate to the upper position, and the bag block can be pushed out.
When parts work at high temperatures, creep occurs (the stress in the metal is constant, usually low stress, but the plastic deformation is slow and continuous), which will reduce its limited strength, limited fatigue and destroy normal lubrication conditions.
The scrap iron shearing machine is a kind of metal shearing machine. It adopts hydraulic drive, simple operation and convenient maintenance. It is installed without anchor screws and can be powered by diesel engines without power supply. The machine adopts hydraulic transmission, scrap iron shears and mechanical transmission shears. Compared with the cutting machine, it has the advantages of small weight, small volume, low inertia, low noise, stable action, convenient operation, flexible, large cutting section, convenient adjustment of the cutting mouth, convenient operation, reliable production, and the cutting process can be stopped at any time, reliability high.
4. The design, manufacturing cycle and cost reduction of the machine with a high degree of standardization, serialization and homogenization of hydraulic control components.