Regardless of the performance of the vertical waste paper baler, it can be summarized as the performance of the vertical waste paper baler. The stability of the operation must be ensured to ensure the uniformity of the packages. So what is the reason that the vertical waste paper baler can not work quickly? Let's understand it together.

1. The oil supply pressure of the oil pump of the vertical waste paper baler cannot meet the flow demand. In order to prevent the occurrence of oil leakage, strict inspection and testing must be carried out before work.

2. If the overflow valve in the vertical waste paper baler is deformed, it will seriously affect the main valve core blockage. The main valve core is blocked in the small opening, which will easily cause some pressure oil output by the Baler machine oil pump to overflow back to the tank, causing The flow of oil in the baler into the actuator is greatly reduced, which slows down the speed of oil supply.

3. The internal and external oil leakage is relatively serious. In fast work, it is easy to cause the oil supply pressure to be too low, but the pressure is much higher than the oil return line. When the piston seal of the Baler machine cylinder is damaged, the two sides of the Baler machine cylinder are easy The accident that caused excessive internal leakage resulted in insufficient rapid movement speed of the cylinder of the horizontal baler, and oil leakage was likely to occur in other parts.

4. The lubrication of the guide rail and the poor installation accuracy and assembly accuracy of the oil cylinder in the vertical waste paper baler are likely to cause the friction resistance to increase when the baler is working.

NKBALER reminds you that doing a good job in the daily maintenance and maintenance of the waste paper baler can effectively extend the service life of the baler and improve the working efficiency of the baler.