1. The material of the hydraulic baler-if the hydraulic baler rods are qualified after inspection and have deformations, cracks and other defects, the connecting parts and fasteners are strictly prohibited. The fasteners and connecting parts of the hydraulic baler must not be used Repair by welding.
2. The foundation ground of the hydraulic baler must be flat, tamped, and hard, and the metal substrate must be flat without deformation. When the ground is soft, use a sweeping rod or pad to strengthen the bearing surface and enhance stability.
3. The hydraulic baler must be set up in accordance with relevant standards and regulations (the hydraulic baler must be horizontal and vertical, and the span and spacing must meet the requirements of the specification). No matter what height the hydraulic baler is set up, it can't be unstable.

4. The springboard on the hydraulic baler needs to be laid neatly, and the width and length should be consistent. The springboard on the hydraulic baler must be fixed and firm, and there must be no large holes on the platform surface.

NMKBALER is a manufacturer specializing in the production of hydraulic Balers. If you need to buy a hydraulic Baler, you can go to the website for consultation or telephone consultation. www.nkbaler.com, Tel: 86-29-86031588