The paper packaged with the waste paper baler is very firm, which can solve the problem that the long-distance transportation and low loss of paper cannot be realized at the same time, which can not only expand the sales scope of the waste paper baler, but also reduce the low loss of paper. In addition, the bricks packaged by the baler have an exquisite appearance, which enhances the customer's impression score. The paper received by the customer is firm and beautiful, and the repurchase rate is naturally increased.
Waste paper baler to reduce the purification space is the direction of the fast and effective way to realize energy saving that everyone is concerned about. The air volume of the purification system depends on the volume of the room and the number of air changes, and the number of air changes is mostly determined by the cleanliness level. Therefore, reducing the air volume of the cleaning system can reduce the purification space. Because the low air volume is quantified, that is, the reasonable selection of the air exchange frequency can reduce the power consumption of the air supply. At the same time, in the pipeline design, the resistance of the system is reduced as much as possible, and the effect of reducing the power consumption of the air supply can also be achieved.
The hydraulic baler PLC controls the packaging. When one electronic eye and two electronic eyes are blocked by the goods at the same time, the program will perform a packaging operation; when one electronic eye and two electronic eyes are blocked but the three electronic eyes are not blocked, a secondary packaging operation is performed. In the process of this procedure, it is possible that the packaging operation of the two channels is not very easy to understand, but it is actually very simple. The reason for this design is to prevent the two cartons from being particularly close, causing misoperation of the packaging machine.
In fact, the packaging process of these products can be summarized as auxiliary time and so on. For most waste paper balers, the method adopted is horizontal baling, because the finished products packaged in this way are not only of better quality but also easy to save space, so that the utilization rate of space can be maximized. The country now calls for energy conservation, emission reduction and environmental protection. This policy can well promote the market share of waste paper balers.
NICKBALER specializes in the development and manufacturing of environmentally friendly waste compression equipment.
Nick Machinery mainly provides convenient, fast, safe and economical solutions for waste paper, waste metal, waste plastic, fiber, agricultural platycodon and other waste recycling and processing enterprises. Contact consultation telephone 86-29-86031588 or https://www.nkbaler.net
The operating principle of the straw baler: the motor is started, and the gear pump is driven by the motor. There are two gears in the pump body that are engaged with each other for rotating movement. Under the effect of atmospheric pressure, it enters the pump from the suction chamber. Following the rolling of the gear, the hydraulic pressure gradually enters the sealed pressure oil chamber, so that the pressure oil chamber is continuously reduced, so it constitutes a hydraulic effect. The hydraulic oil is pressed out of the pump, and the pressed hydraulic oil enters the reversing valve through the pipeline to operate The control rod makes the hydraulic oil move directionally, and the hydraulic oil enters the cylinder through the pipeline along the distribution direction. The continuous flow of hydraulic oil causes the piston in the cylinder to receive huge pressure and push the push rod to move in a straight line. Under the effect of, the propelling piston descends to compress the object to be pressed. When it rises, the operating rod is in the rising position, and the pressure oil enters the lower chamber of the cylinder through the reversing valve, pushing the piston up under the effect of pressure, and the upper chamber oil flows through the upper chamber hole, and the oil return valve flows back to the oil tank. When the straw baler is Baler, the Baler material should be filled into the pressure box, and the downward control valve is operated to make the push rod move downward to tighten the Baler material. When the downward movement is to a certain degree, the operating lever control valve pushes upward and then loads the material to be packed, so that it reciprocates Several times to reach the standard package weight is the main.