WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • In recent years, with the rapid development of my country’s economic level, people’s material consumption levels continue to increase, and the corresponding amount of garbage is also growing rapidly. The problem of garbage generation has become increasingly prominent, and people’s reactions have become more and more intense. The implementation of garbage classification It is imperative that the implementation of waste classification is of great significance. So what is the specific meaning of garbage classification?
    1. Improve the living environment and promote people's health
    The mass production of garbage has made environmental and health problems increasingly prominent. Random disposal, simple stacking and disposal of garbage will cause many problems, such as destroying a good living environment, polluting water sources, soil, air and other environments, causing a large number of mosquitoes and bacteria to breed, and increasing the probability of infectious diseases. The implementation of garbage classification can improve our living environment and reduce the pollution of garbage to the environment, thereby benefiting people's health.
    2. Economize the use of resources and promote economic benefits
    The massive output of rubbish has caused a great waste of resources. The implementation of garbage classification is to fully sort out the recyclables in the garbage. If the wastes with recycling value in the garbage are collected, the source of the garbage can be greatly reduced, and the collected recyclables will be changed. Turning waste into treasure can effectively promote the recycling and utilization of resources, and it can also produce considerable economic benefits. The implementation of garbage classification is to sort out the kitchen waste in the garbage, and the sorted kitchen waste is composted and fermented, and the organic components can be made into fertilizer for farmland and greening. After the kitchen waste is separated, the remaining garbage is incinerated. Without garbage, the incineration process will burn more fully, and more heat energy resources will be recovered. Different treatment methods for different garbage can greatly reduce the final landfill volume, greatly save landfill sites, and reduce environmental pollution.

    So the question is how to save these recyclable garbage resources and how to transport them. The hydraulic baler produced by Nick Machinery solves this very well, through hydraulic principles. It is suitable for the compression and Baling Press of waste paper, waste plastics, waste mineral water bottles, waste clothing, waste straw, woven bags, waste wool, cloth, sacks, wheat straw, fibers, plastic bags and other loose items, reducing the volume and facilitating replacement, transportation and Reduce storage space, its compact structure, economical application, simple operation, safety and reliability, etc., is an ideal equipment for material packaging and waste recycling industries to get rich.

    Nick Machinery is a professional manufacturer of hydraulic machinery and packaging machinery. It provides various styles and models of balers with a wide range of packaging and has made a great contribution to garbage classification.www.nkbaler.net
  • At present, when China’s packaging machinery industry introduces international high-end equipment, it has not been able to digest, absorb, and innovate well, and it has also failed to strengthen its independent innovation capabilities in market tracking analysis and seize market opportunities. Relevant data shows that China’s packaging On the whole, the level of machine technology is about 20 years behind that of advanced countries. It is at a disadvantage in terms of product development, technical content, performance, quality, and reliability. Therefore, compared with foreign companies, it has no competitive advantage and lacks market initiative. The equipment technology is still in the technical field of the 1990s. The world's machinery manufacturing powers attach importance to the development of basic products. Due to the wide application of high-tech foreign hydraulic baler technology, basic products have great levels, varieties and expanded application fields. Improvement and development.
    The application of automatic baler in the packaging industry has promoted the development of tobacco baler to a certain extent, improved production efficiency, and reduced labor intensity. However, because the development of Chinese baler companies has always been developed by imitating or imitating foreign balers, this form has great drawbacks, which largely restricts the development of this industry in my country and makes the overall development of the industry The stagnation is actually due to the lack of innovation in my country's baler industry.

    With the rapid economic development, the development of my country's baler industry has been promoted. In the face of global development trends, my country's packaging machinery also needs continuous improvement. Through imitation, technology introduction and global procurement, the manufacturing level and industrial design level of China's packaging machinery can develop rapidly. At present, my country's fully automatic balers are rarely used in tobacco, which requires industry personnel to continuously transform the original process level and technical performance through technological innovation, and quickly improve the degree of automation technology of the equipment to reduce labor intensity and improve work efficiency.

    Nick Machinery specializes in hydraulic baler for many years, and actively absorbs advanced experience and independent innovation of high-tech achievements. Tailor-made tobacco leaf Balers suitable for local factors for enterprises, and strive to satisfy users in many aspects.www.nkbaler.net

  • At present, the baler used in the domestic tobacco industry is not very mechanized. It is only a motor-driven, up-and-down hydraulic baler. In the process of work, manual operation is required to turn on the hydraulic lifting control switch, manually open the package box, and squeeze. Later, sometimes the package box was difficult to open due to the expansion of the tobacco leaf, and it needed to be beaten with a hammer to open it. There are unsafe factors in the manual opening of the packaging process, which requires workers in the tobacco industry to continuously innovate and propose more technical transformation measures to improve work efficiency and improve safety. At present, in the Zhucheng tobacco area of ??Huaifang, Shandong, the tobacco leaf baler used in the tobacco leaf purchase process has a relatively simple structure. Only one baler is required to control the lifting of the hydraulic cylinder and is responsible for the opening of the packaging box and the launching of the packaging box. Due to the long-term use of the baler, the hydraulic oil in the cylinder is overheated, which affects the working efficiency of the baler. In view of the above shortcomings, it is necessary to develop an automatic squeezing and Baling Press tobacco baler to realize the automatic lifting of the hydraulic cylinder and the Baling Press box. The packaged individual is responsible for launching the opened package box. It can improve the automation level and safety performance of the equipment, save labor costs, reduce labor intensity, and improve work efficiency. It is suitable for large-scale promotion and application to adapt to modern tobacco agriculture. The need for development.

    Nick Machinery is a professional manufacturer of hydraulic machinery and equipment. After more than 10 years of development, it has formed a variety of models to keep up with the market.www.nkbaler.net

  • The straw hydraulic baler needs to be kept as dry as possible. In the autumn harvest season, crops have a bumper harvest. At the same time, straw crop residues occupy a large amount of arable land. How to solve the difficulty of large-scale storage of straw is the most urgent thing facing farmers. We have used incineration to solve this problem before, but this method is not only easy to cause air pollution, but also easy to cause fires. The emergence of straw hydraulic baler equipment has completely solved the difficulty of transportation and storage of straw residues. We use the straw hydraulic baler to first classify and pack the straw residue, and then transport it to the warehouse for storage. This not only greatly reduces the burden of straw storage, but also greatly reduces the workload of farmers. The straw baler is designed for the characteristics of loose and difficult storage of straw residues. Before baling, the straws are dried and screened to create a dry environment for the straws. Then use a straw baler for baling. The straw bales produced in this way will not cause the straws to become moldy and deteriorate even if they are not placed for a long time.

    Nick brand straw baler is safe and reliable, low power consumption, economical and reasonable, easy to use, simple to maintain and operate. It is a good helper for your production.www.nkbaler.net
  • Straw silage baler is a high-density automatic baler that packs loose dry forages (also used for other fibrous materials, such as lint, lint, straw, wheat straw, corn stalks, etc.) at one time, without secondary processing equipment.
    This machine is mainly composed of a chassis, a press box, a hydraulic system, an electronic control system, a stroke control device, and a press and discharge device. It is an advanced technology that integrates mechanical, electronic, and hydraulic technologies. It has a compact structure and is durable. The equipment has the characteristics of low power consumption, small footprint, high density, high output, convenient movement, simple operation, reliability and safety.
    The straw silage baler adopts fully automatic control, the whole Baler and compression process does not require manual intervention, and the molding materials are directly automatically packed into the special mesh bag, which greatly saves labor.

    The pasture produced and processed by this machine has a neat appearance and high density, which reduces transportation and storage space and greatly reduces transportation and storage costs. It is an ideal packaging equipment for large, medium and small farms and pasture production bases.

    Nick Machinery's automatic straw baler has high degree of automation, convenient operation and high work efficiency. It is a good helper for your production.www.nkbaler.net
Shaanxi Nick Machinery Equipment Co.,LTD 
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top